<div>Archer is an aerospace company based in San Jose, California building an all-electric vertical takeoff and landing aircraft with a mission to advance the benefits of sustainable air mobility. We are designing, manufacturing, and operating an all-electric aircraft that can carry four passengers while producing minimal noise.Our sights are set high and our problems are hard, and we believe that diversity in the workplace is what makes us smarter, drives better insights, and will ultimately lift us all to success. We are dedicated to cultivating an equitable and inclusive environment that embraces our differences, and supports and celebrates all of our team members.</div>What you’ll do: <ul><li>Embedded development and verification of safety critical software components for the aircraft Charge Control Unit</li><li>Design and implement charge control systems with a focus on interfacing embedded software with high voltage electrical components and analog/digital circuitry</li><li>Collaborate with systems engineers to decompose item requirements into high-level and low-level software requirements in compliance with DO-178C </li><li>Work with a multi-disciplinary team to develop, integrate, verify and certify complex hardware/software systems </li><li>Develop and implement fault detection and diagnostic algorithms in software to identify and respond to hardware-level events such as short circuits, and sensor failures</li><li>Analyze hardware schematics and perform signal integrity and power distribution network design to inform embedded software development</li><li> Participate in the definition and documentation of streamlined software development and verification processes supporting the certification of safety critical software to comply with DO-178C </li><li> Foster team collaboration to promote and support personal development </li></ul>General <ul><li> Excellent verbal and written interpersonal communication </li><li> Excellent Organizational skills </li><li> Collaborative mindset </li><li> Passion for learning and problem solving </li></ul>What you need: <ul><li>4+ years of experience in a related field </li><li>At least a BS in Electrical Engineering, Computer Engineering, Computer Science, or related degree </li><li>Proficiency in C/C++ for developing firmware that controls and monitors electrical subsystems including volatage regulation, fault detection and sensor data acquisition</li><li>Hands-on experience with ISO 15118-2/-3/-30, SAE J1772, HomePlug AV Specification Standards, or related industry standards.</li><li>Familiarity with safety critical software development standards (DO-178C, ISO 26262, ASIL) to high criticality levels (DAL-A/B or ASIL C/D) </li><li>Hands-on experience through the Full Software Development Life Cycle (development through verification and or certification/production) </li><li>Hands-on understanding of low-level communication standards and protocols (RS-422/485, CAN, ARINC-429, AFDX, Ethernet, TCP/IP, SPI, I2C etc…) and their hardware implementation</li><li>Working knowledge of sensor technologies and measurement techniques for high-voltage systems (e.g., current sensing, voltage monitoring, temperature measurement) </li><li>Familiarity with diverse tools and technologies used for the development, testing and analysis  Experience working on Charge Control systems </li><li>Excellent organizational and communication skills </li></ul>Bonus qualifications <ul><li> Experience with MATLAB/Simulink and circuit simulation tools such as SPICE, LTspice or PLECS</li><li> Experience with modeling tools/certification (DO-331) </li><li> Familiarity with modeling tools like UML or SysML </li><li> Working with Real Time Operating Systems (RTOS) </li><li>Demonstrated experience with initial board bring-up, hardware debugging, and using lab equipment (oscilloscopes, logic analyzers, power supplies). </li><li> Experience with the HW in the Loop, SW in the Loop or MIL 2</li></ul>Please note that this job description is intended to provide a general overview of the position and does not include an exhaustive list of responsibilities and qualifications At Archer we aim to attract, retain, and motivate talent that possess the skills and leadership necessary to grow our business. We drive a pay-for-performance culture and reward performance that supports the Company’s business strategy. For this position we are targeting a base pay between $134,400 - $165,000. Actual compensation offered will be determined by factors such as job-related knowledge, skills, and experience.Archer is committed to working with and providing reasonable accommodations to job applicants with physical or mental disabilities, and those with sincerely held religious beliefs. Applicants who may require reasonable accommodation for any part of the application or hiring process should provide their name and contact information to Archer’s People Team at people@archer.com. Reasonable accommodations will be determined on a case-by-case basis. By applying, you agree to be bound by our candidate privacy policy.<div><hr>Information collected and processed as part of any job applications you choose to submit is subject to Archer's <a href="https://archer.com/legal/personnel-candidate-privacy-policy">Candidate Privacy Policy</a>.Archer is unable to provide work visa sponsorship for this position at the present time.Archer is proud to be an Equal Opportunity employer committed to diversity and inclusivity in the workplace. All aspects of employment are decided on the basis of merit, qualifications, and business needs. We do not discriminate based upon race, color, religion, sex, sexual orientation, age, national origin, disability status, protected veteran status, gender identity or any other characteristic protected by federal, state or local laws.Archer Aviation does not engage with external recruiting agencies/individual recruiters with whom it does not have a prior written agreement. Archer reserves the right to make use of any unsolicited resumes that it receives and bears no responsibility for payment of any fees asserted from the use of unsolicited resumes. If you are a recruiting agency or individual recruiter wishing to do business with Archer, please reach out to <a href="mailto:People@archer.com">People@archer.com</a>. All employment processes are managed by the Archer People Team.</div>

Archer is designing and developing electric vertical takeoff and landing aircraft for use in urban air mobility networks. Archer&rsquo;s mission is to unlock the skies, freeing everyone to reimagine how they move and spend time. Archer's team is based in Santa Clara, CA. To learn more, visit www.archer.com.

Sr. Embedded Software Engineer, Charge Control Unit

<div>Archer is an aerospace company based in San Jose, California building an all-electric vertical takeoff and landing aircraft with a mission to advance the benefits of sustainable air mobility. We are designing, manufacturing, and operating an all-electric aircraft that can carry four passengers while producing minimal noise.Our sights are set high and our problems are hard, and we believe that diversity in the workplace is what makes us smarter, drives better insights, and will ultimately lift us all to success. We are dedicated to cultivating an equitable and inclusive environment that embraces our differences, and supports and celebrates all of our team members.</div>What you’ll do:&nbsp;<ul><li>Embedded development and verification of safety critical software components for the aircraft Charge Control Unit</li><li>Design and implement charge control systems with a focus on interfacing embedded software with high voltage electrical components and analog/digital circuitry</li><li>Collaborate with systems engineers to decompose item requirements into high-level and low-level software requirements in compliance with DO-178C&nbsp;</li><li>Work with a multi-disciplinary team to develop, integrate, verify and certify complex hardware/software systems&nbsp;</li><li>Develop and implement fault detection and diagnostic algorithms in software to identify and respond to hardware-level events such as short circuits, and sensor failures</li><li>Analyze hardware schematics and perform signal integrity and power distribution network design to inform embedded software development</li><li>&nbsp;Participate in the definition and documentation of streamlined software development and verification processes supporting the certification of safety critical software to comply with DO-178C&nbsp;</li><li>&nbsp;Foster team collaboration to promote and support personal development&nbsp;</li></ul>General&nbsp;<ul><li>&nbsp;Excellent verbal and written interpersonal communication&nbsp;</li><li>&nbsp;Excellent Organizational skills&nbsp;</li><li>&nbsp;Collaborative mindset&nbsp;</li><li>&nbsp;Passion for learning and problem solving&nbsp;</li></ul>What you need:&nbsp;<ul><li>4+ years of experience in a related field&nbsp;</li><li>At least a BS in Electrical Engineering, Computer Engineering, Computer Science, or related degree&nbsp;</li><li>Proficiency in C/C++ for developing firmware that controls and monitors electrical subsystems including volatage regulation, fault detection and sensor data acquisition</li><li>Hands-on experience with ISO 15118-2/-3/-30, SAE J1772, HomePlug AV Specification Standards, or related industry standards.</li><li>Familiarity with safety critical software development standards (DO-178C, ISO 26262, ASIL) to high criticality levels (DAL-A/B or ASIL C/D)&nbsp;</li><li>Hands-on experience through the Full Software Development Life Cycle (development through verification and or certification/production)&nbsp;</li><li>Hands-on understanding of low-level communication standards and protocols (RS-422/485, CAN, ARINC-429, AFDX, Ethernet, TCP/IP, SPI, I2C etc…) and their hardware implementation</li><li>Working knowledge of sensor technologies and measurement techniques for high-voltage systems (e.g., current sensing, voltage monitoring, temperature measurement)&nbsp;</li><li>Familiarity with diverse tools and technologies used for the development, testing and analysis&nbsp; Experience working on Charge Control systems&nbsp;</li><li>Excellent organizational and communication skills&nbsp;</li></ul>Bonus qualifications&nbsp;<ul><li>&nbsp;Experience with MATLAB/Simulink and circuit simulation tools such as SPICE, LTspice or PLECS</li><li>&nbsp;Experience with modeling tools/certification (DO-331)&nbsp;</li><li>&nbsp;Familiarity with modeling tools like UML or SysML&nbsp;</li><li>&nbsp;Working with Real Time Operating Systems (RTOS)&nbsp;</li><li>Demonstrated experience with initial board bring-up, hardware debugging, and using lab equipment (oscilloscopes, logic analyzers, power supplies).&nbsp;</li><li>&nbsp;Experience with the HW in the Loop, SW in the Loop or MIL 2</li></ul>Please note that this job description is intended to provide a general overview of the position and does not include an exhaustive list of responsibilities and qualifications&nbsp;At Archer we aim to attract, retain, and motivate talent that possess the skills and leadership necessary to grow our business. We drive a pay-for-performance culture and reward performance that supports the Company’s business strategy. For this position we are targeting a base pay between $134,400 - $165,000. Actual compensation offered will be determined by factors such as job-related knowledge, skills, and experience.Archer is committed to working with and providing reasonable accommodations to job applicants with physical or mental disabilities, and those with sincerely held religious beliefs. Applicants who may require reasonable accommodation for any part of the application or hiring process should provide their name and contact information to Archer’s People Team at people@archer.com. Reasonable accommodations will be determined on a case-by-case basis.&nbsp;By applying, you agree to be bound by our candidate privacy policy.<div><hr>Information collected and processed as part of any job applications you choose to submit is subject to Archer's <a href="https://archer.com/legal/personnel-candidate-privacy-policy">Candidate Privacy Policy</a>.Archer is unable to provide work visa sponsorship for this position at the present time.Archer is proud to be an Equal Opportunity employer committed to diversity and inclusivity in the workplace. All aspects of employment are decided on the basis of merit, qualifications, and business needs. We do not discriminate based upon race, color, religion, sex, sexual orientation, age, national origin, disability status, protected veteran status, gender identity or any other characteristic protected by federal, state or local laws.Archer Aviation does not engage with external recruiting agencies/individual recruiters with whom it does not have a prior written agreement. Archer reserves the right to make use of any unsolicited resumes that it receives and bears no responsibility for payment of any fees asserted from the use of unsolicited resumes. If you are a recruiting agency or individual recruiter wishing to do business with Archer, please reach out to&nbsp;<a href="mailto:People@archer.com">People@archer.com</a>. All employment processes are managed by the Archer People Team.</div>

Sr. Embedded Software Engineer, Charge Control Unit

About the Job

About the Company

Archer

Similar Jobs

Senior Equipment Design Engineer

Senior Equipment Design Engineer

Rigging, Fixtures and Ground Support Equipment Engineer

Rigging, Fixtures and Ground Support Equipment Engineer

Staff Prototype Mechanical Engineer

Staff Prototype Mechanical Engineer

Sr. Design Engineer, Wire Harness Packaging

Sr. Design Engineer, Wire Harness Packaging

Senior Mechanical Engineer, Low Voltage Electronics

Senior Mechanical Engineer, Low Voltage Electronics

Sr. Hardware Design Engineer

Sr. Hardware Design Engineer

Senior Mechanical Engineer

Senior Mechanical Engineer

Senior Mechanical Design Engineer

Senior Mechanical Design Engineer

Systems Test Engineer

Systems Test Engineer

Senior Mechanical Engineer

Senior Mechanical Engineer