<div>Archer is an aerospace company based in San Jose, California building an all-electric vertical takeoff and landing aircraft with a mission to advance the benefits of sustainable air mobility. We are designing, manufacturing, and operating an all-electric aircraft that can carry four passengers while producing minimal noise.Our sights are set high and our problems are hard, and we believe that diversity in the workplace is what makes us smarter, drives better insights, and will ultimately lift us all to success. We are dedicated to cultivating an equitable and inclusive environment that embraces our differences, and supports and celebrates all of our team members.</div>Archer is an aerospace company based in San Jose, California building an all-electric vertical takeoff and landing aircraft with a mission to advance the benefits of sustainable air mobility. We design, manufacture, and operate an all-electric aircraft that can carry four passengers for 60 miles at speeds of up to 150 mph while producing minimal noise. Our sights are set high, and our problems are hard, and we believe that diversity in the workplace is what makes us smarter, drives better insights, and will ultimately lift us all to success. We are dedicated to cultivating an equitable and inclusive environment that embraces our differences and supports and celebrates all our team members.What you’ll do:<ul><li>Manage the Powertrain (Battery Pack/Electric Motor) manufacturing design engineering teams, responsible from prototype through series production</li><li>Collaborate with Product Design Engineering, Test, Quality, Manufacturing and Facilities teams</li><li>Lead the development of a high-volume electric motor/battery pack production system including </li><ul><li>Design For Manufacturing </li><li>Process development</li><li>Plant layout</li><li>Equipment selection and management</li><li>Factory Acceptance Test and Site Acceptance Test</li><li>Installation</li><li>New Product Introduction</li></ul><li>Identify and drive continuous improvement and cost reduction programs, optimize product flow and line efficiency by designing or improving tools, jigs, stations, work methods and ergonomics using the 5S methodology</li><li>Drive process control, specifically in the areas of quality and equipment capability</li><li>Support process failure mode and analysis (PFMEA) </li><li>Support supply chain development and procurement of key components</li><li>Support operations on the shop floor, establish KPIs in order to drive performance management, identify trends and mitigate risks</li><li>Develop, coach and mentor ME’s to ensure they understand roles &amp; responsibilities, provide performance feedback, develop a career roadmap and partner with them on their career aspirations</li></ul>What you need:<ul><li>BS or MS Degree in Engineering or a related field</li><li>5+ years experience in manufacturing and / or automation</li><li>2+ years experience in the EV field specifically with electric motor manufacturing (rotor or stator manufacturing)/battery pack manufacturing</li><li>2+ years managing team</li><li>Strong hands-on experience with prototype and high-volume manufacturing</li><li>Experience with budgeting, forecasting, and financial planning </li><li>Excellent organizational and communication skills</li><li>Demonstrated experience in statistical process control, GD&amp;T, and lean manufacturing concepts</li><li>Knowledge of Electrical Standards (NFPA79, NEC, UL508A)</li><li>Knowledge of Safety Standards (ANSI/RIA15.06, OSHA)</li><li>Experience integrating/setting up/using a wide variety of industrial equipment such as dispense systems, torque tools, power transducers, etc.</li><li>Experience with CAD, PLM, MES, and ERP software.</li><li>Working knowledge of PLCs, robots, motion control devices, vision systems and human machine safety devices.</li><li>Strong organizational skills</li></ul>Bonus Qualifications: <ul><li>Experience with Stator and or Rotor Lines RFQ/PO/FAT/SAT/SOP and handoffs.</li><li>Experience with Stator and or Rotor lines vendors and its machines deployment.</li><li>Experience with Hairpin Stators and or Permanent Magnet Rotors</li><li>FAR 23 experience</li><li>Part 21 experience</li><li>FAA Production Certificate experience</li></ul>At Archer we aim to attract, retain, and motivate talent that possess the skills and leadership necessary to grow our business. We drive a pay-for-performance culture and reward performance that supports the Company’s business strategy. For this position we are targeting a base pay between $183,600 - $204,000. Actual compensation offered will be determined by factors such as job-related knowledge, skills, and experience.Archer is committed to working with and providing reasonable accommodations to job applicants with physical or mental disabilities, and those with sincerely held religious beliefs. Applicants who may require reasonable accommodation for any part of the application or hiring process should provide their name and contact information to Archer’s People Team at <a href="mailto:people@archer.com">people@archer.com</a>. Reasonable accommodations will be determined on a case-by-case basis. <div><hr>Information collected and processed as part of any job applications you choose to submit is subject to Archer's <a href="https://archer.com/legal/personnel-candidate-privacy-policy">Candidate Privacy Policy</a>.Archer is unable to provide work visa sponsorship for this position at the present time.Archer is proud to be an Equal Opportunity employer committed to diversity and inclusivity in the workplace. All aspects of employment are decided on the basis of merit, qualifications, and business needs. We do not discriminate based upon race, color, religion, sex, sexual orientation, age, national origin, disability status, protected veteran status, gender identity or any other characteristic protected by federal, state or local laws.Archer Aviation does not engage with external recruiting agencies/individual recruiters with whom it does not have a prior written agreement. Archer reserves the right to make use of any unsolicited resumes that it receives and bears no responsibility for payment of any fees asserted from the use of unsolicited resumes. If you are a recruiting agency or individual recruiter wishing to do business with Archer, please reach out to <a href="mailto:People@archer.com">People@archer.com</a>. All employment processes are managed by the Archer People Team.</div>

Archer is designing and developing electric vertical takeoff and landing aircraft for use in urban air mobility networks. Archer&rsquo;s mission is to unlock the skies, freeing everyone to reimagine how they move and spend time. Archer's team is based in Santa Clara, CA. To learn more, visit www.archer.com.

Manager, Powertrain Manufacturing Engineering

<div>Archer is an aerospace company based in San Jose, California building an all-electric vertical takeoff and landing aircraft with a mission to advance the benefits of sustainable air mobility. We are designing, manufacturing, and operating an all-electric aircraft that can carry four passengers while producing minimal noise.Our sights are set high and our problems are hard, and we believe that diversity in the workplace is what makes us smarter, drives better insights, and will ultimately lift us all to success. We are dedicated to cultivating an equitable and inclusive environment that embraces our differences, and supports and celebrates all of our team members.</div>Archer is an aerospace company based in San Jose, California building an all-electric vertical takeoff and landing aircraft with a mission to advance the benefits of sustainable air mobility. We design, manufacture, and operate an all-electric aircraft that can carry four passengers for 60 miles at speeds of up to 150 mph while producing minimal noise.&nbsp;Our sights are set high, and our problems are hard, and we believe that diversity in the workplace is what makes us smarter, drives better insights, and will ultimately lift us all to success. We are dedicated to cultivating an equitable and inclusive environment that embraces our differences and supports and celebrates all our team members.What you’ll do:<ul><li>Manage the Powertrain (Battery Pack/Electric Motor) manufacturing design engineering teams, responsible from prototype through series production</li><li>Collaborate with Product Design Engineering, Test, Quality, Manufacturing and Facilities teams</li><li>Lead the development of a high-volume electric motor/battery pack production system including&nbsp;</li><ul><li>Design For Manufacturing&nbsp;</li><li>Process development</li><li>Plant layout</li><li>Equipment selection and management</li><li>Factory Acceptance Test and Site Acceptance Test</li><li>Installation</li><li>New Product Introduction</li></ul><li>Identify and drive continuous improvement and cost reduction programs, optimize product flow and line efficiency by designing or improving tools, jigs, stations, work methods and ergonomics using the 5S methodology</li><li>Drive process control, specifically in the areas of quality and equipment capability</li><li>Support process failure mode and analysis (PFMEA)&nbsp;</li><li>Support supply chain development and procurement of key components</li><li>Support operations on the shop floor, establish KPIs in order to drive performance management, identify trends and mitigate risks</li><li>Develop, coach and mentor ME’s to ensure they understand roles &amp; responsibilities, provide performance feedback, develop a career roadmap and partner with them on their career aspirations</li></ul>What you need:<ul><li>BS or MS Degree in Engineering or a related field</li><li>5+ years experience in manufacturing and / or automation</li><li>2+ years experience in the EV field specifically with electric motor manufacturing (rotor or stator manufacturing)/battery pack manufacturing</li><li>2+ years managing team</li><li>Strong hands-on experience with prototype and high-volume manufacturing</li><li>Experience with budgeting, forecasting, and financial planning&nbsp;</li><li>Excellent organizational and communication skills</li><li>Demonstrated experience in statistical process control, GD&amp;T, and lean manufacturing concepts</li><li>Knowledge of Electrical Standards (NFPA79, NEC, UL508A)</li><li>Knowledge of Safety Standards (ANSI/RIA15.06, OSHA)</li><li>Experience integrating/setting up/using a wide variety of industrial equipment such as dispense systems, torque tools, power transducers, etc.</li><li>Experience with CAD, PLM, MES, and ERP software.</li><li>Working knowledge of PLCs, robots, motion control devices, vision systems and human machine safety devices.</li><li>Strong organizational skills</li></ul>Bonus Qualifications:&nbsp;<ul><li>Experience with Stator and or Rotor Lines RFQ/PO/FAT/SAT/SOP and handoffs.</li><li>Experience with Stator and or Rotor lines vendors and its machines deployment.</li><li>Experience with Hairpin Stators and or Permanent Magnet Rotors</li><li>FAR 23 experience</li><li>Part 21 experience</li><li>FAA Production Certificate experience</li></ul>At Archer we aim to attract, retain, and motivate talent that possess the skills and leadership necessary to grow our business. We drive a pay-for-performance culture and reward performance that supports the Company’s business strategy. For this position we are targeting a base pay between $183,600 - $204,000. Actual compensation offered will be determined by factors such as job-related knowledge, skills, and experience.Archer is committed to working with and providing reasonable accommodations to job applicants with physical or mental disabilities, and those with sincerely held religious beliefs. Applicants who may require reasonable accommodation for any part of the application or hiring process should provide their name and contact information to Archer’s People Team at <a href="mailto:people@archer.com">people@archer.com</a>. Reasonable accommodations will be determined on a case-by-case basis.&nbsp;<div><hr>Information collected and processed as part of any job applications you choose to submit is subject to Archer's <a href="https://archer.com/legal/personnel-candidate-privacy-policy">Candidate Privacy Policy</a>.Archer is unable to provide work visa sponsorship for this position at the present time.Archer is proud to be an Equal Opportunity employer committed to diversity and inclusivity in the workplace. All aspects of employment are decided on the basis of merit, qualifications, and business needs. We do not discriminate based upon race, color, religion, sex, sexual orientation, age, national origin, disability status, protected veteran status, gender identity or any other characteristic protected by federal, state or local laws.Archer Aviation does not engage with external recruiting agencies/individual recruiters with whom it does not have a prior written agreement. Archer reserves the right to make use of any unsolicited resumes that it receives and bears no responsibility for payment of any fees asserted from the use of unsolicited resumes. If you are a recruiting agency or individual recruiter wishing to do business with Archer, please reach out to&nbsp;<a href="mailto:People@archer.com">People@archer.com</a>. All employment processes are managed by the Archer People Team.</div>

Manager, Powertrain Manufacturing Engineering

About the Job

About the Company

Archer

Similar Jobs

Manufacturing Engineering Manager, Drive Unit

Manufacturing Engineering Manager, Drive Unit

Senior Engineer, Vehicle Packaging

Senior Engineer, Vehicle Packaging

Sr. Manufacturing Engineer, Powertrain Battery

Sr. Manufacturing Engineer, Powertrain Battery

Sr Manufacturing Engineer, Launch Powertrain

Sr Manufacturing Engineer, Launch Powertrain

Sr Manager, Powertrain Manufacturing , Battery

Sr Manager, Powertrain Manufacturing , Battery

Sr. Manufacturing Engineer PWT (Power Electronics)

Sr. Manufacturing Engineer PWT (Power Electronics)

Sr. Manufacturing Engineer, Powertrain Advanced Manufacturing

Sr. Manufacturing Engineer, Powertrain Advanced Manufacturing

Manager, Powertrain Maintenance

Manager, Powertrain Maintenance

Sr. Vehicle Development Engineer, Vehicle Test

Sr. Vehicle Development Engineer, Vehicle Test

Technical Project Manager, Powertrain Electronics

Technical Project Manager, Powertrain Electronics