Join the Revolution at Zero Motorcycles!Zero Motorcycles is seeking an experienced Contract Systems Engineer to join our Electrical Engineering Department for a critical 6-month engagement. You'll be stepping into an active project mid-development cycle, taking ownership of testing, validation, and design refinement activities for our electrical and battery systems integration.Position SummaryWe need a seasoned engineer who can quickly integrate into an ongoing project and drive it through the testing and validation phase. You'll inherit existing designs and requirements, then focus intensively on proving performance, identifying gaps, and refining solutions to meet specifications. This role requires someone who can work independently, make rapid technical decisions, and thoroughly document all work for seamless knowledge transfer to permanent team members. You will be working within a team in Scotts Valley CA, with a Partner in this project located in India, an offshore team located in India and vendors worldwide but primarily in Asia Territories.Key ResponsibilitiesTesting &amp; Validation Focus:<ul><li>Take ownership of existing DVP&amp;R plans and execute comprehensive testing protocols</li><li>Conduct rigorous testing of electrical systems and battery pack assemblies</li><li>Analyze test results, identify failure modes, and recommend corrective actions</li><li>Validate designs against established requirements and specifications</li><li>Perform and update DFMEA based on testing discoveries and design evolution</li></ul>Design Refinement &amp; Problem Solving:<ul><li>React quickly to testing discoveries and implement design modifications</li><li>Work with existing vendor relationships to qualify alternative components as needed</li><li>Troubleshoot system integration issues and embedded software interactions</li><li>Balance technical solutions with cost and timing constraints within existing project framework</li><li>Refine battery pack architecture based on testing feedback and performance data</li></ul>Documentation &amp; Knowledge Transfer:<ul><li>Maintain comprehensive documentation of all testing procedures, results, and design changes</li><li>Create detailed technical reports and design rationale documents</li><li>Prepare thorough knowledge transfer materials for incoming permanent team members</li><li>Document vendor relationships, component specifications, and design decision history</li><li>Establish clear handoff protocols for ongoing project support</li></ul>Required Qualifications<ul><li>Bachelor's degree in Electrical Engineering, Mechanical Engineering, or equivalent</li><li>8+ years experience in product development with ability to jump into mid-stage projects</li><li>5+ years hands-on experience with Li-Ion battery systems and electrical integration</li><li>Proven track record with DFMEA development and execution</li><li>Strong experience in DVP&amp;R planning and test execution</li><li>EV/HEV experience required; automotive development processes essential</li><li>Exceptional troubleshooting skills and ability to work independently</li><li>Outstanding documentation and technical writing abilities</li><li>Experience with knowledge transfer and project handoffs</li></ul>Essential Skills for This Contract<ul><li>Ability to quickly assess existing project status and technical requirements</li><li>Self-directed work style with minimal ramp-up time required</li><li>Strong analytical skills for interpreting complex test data</li><li>Experience working with lab equipment and test setups</li><li>Proven ability to make sound technical decisions under time constraints</li><li>Excellent communication skills for cross-functional collaboration</li></ul>Contract DetailsDuration: 6 months with potential for extension based on project needs Location: Onsite at Scotts Valley, California headquarters Travel: ~15% domestic and international as project requires Start Date: Immediate availability preferredPhysical Requirements<ul><li>Navigate lab environments and operate technical testing equipment</li><li>Lift up to 50 pounds (battery packs and test equipment)</li><li>Extended periods of detailed technical work and documentation</li></ul>Note: This contract position is ideal for an experienced engineer looking for a focused, high-impact engagement where your expertise will directly influence product success and provide valuable experience in rapid project integration and knowledge transferWe believe diversity is our strength, and inclusion is our foundation. As an Equal Opportunity Employer, we are committed to building a workplace where everyone—regardless of race, ethnicity, gender identity, sexual orientation, disability, age, or background—can thrive. We celebrate individuality, amplify diverse voices, and strive to foster an environment where everyone feels seen, heard, and empowered to do their best work. Together, we’re shaping a future that works for all.

Zero Motorcycles is the next step in motorcycle evolution and represents the ultimate electric motorcycle technology. Unencumbered by conventional thinking about how they design, manufacture, and sell high-performance electric motorcycles, they're on a mission to turn heads and revolutionize their industry by combining the best aspects of a traditional motorcycle with today's most advanced technology. The result is an electric motorcycle line that's insanely fast, and environmentally friendly.

Since its inception, Zero Motorcycles, Inc. (formerly Electricross) has been dedicated to developing the very best in electric motorcycle technology. Built for both experienced and entry-level riders their premium motorcycle line offers blistering acceleration and speed with optional settings for the less aggressive. What separates them from their competition is the performance, quality, and reliability of each bike.

It was founded in 2006 and is headquartered in Scotts Valley, California.

Contract Electrical Battery Systems Engineer

Join the Revolution at Zero Motorcycles!Zero Motorcycles is seeking an experienced Contract Systems Engineer to join our Electrical Engineering Department for a critical 6-month engagement. You'll be stepping into an active project mid-development cycle, taking ownership of testing, validation, and design refinement activities for our electrical and battery systems integration.Position SummaryWe need a seasoned engineer who can quickly integrate into an ongoing project and drive it through the testing and validation phase. You'll inherit existing designs and requirements, then focus intensively on proving performance, identifying gaps, and refining solutions to meet specifications. This role requires someone who can work independently, make rapid technical decisions, and thoroughly document all work for seamless knowledge transfer to permanent team members. You will be working within a team in Scotts Valley CA, with a Partner in this project located in India, an offshore team located in India and vendors worldwide but primarily in Asia Territories.Key ResponsibilitiesTesting &amp; Validation Focus:<ul><li>Take ownership of existing DVP&amp;R plans and execute comprehensive testing protocols</li><li>Conduct rigorous testing of electrical systems and battery pack assemblies</li><li>Analyze test results, identify failure modes, and recommend corrective actions</li><li>Validate designs against established requirements and specifications</li><li>Perform and update DFMEA based on testing discoveries and design evolution</li></ul>Design Refinement &amp; Problem Solving:<ul><li>React quickly to testing discoveries and implement design modifications</li><li>Work with existing vendor relationships to qualify alternative components as needed</li><li>Troubleshoot system integration issues and embedded software interactions</li><li>Balance technical solutions with cost and timing constraints within existing project framework</li><li>Refine battery pack architecture based on testing feedback and performance data</li></ul>Documentation &amp; Knowledge Transfer:<ul><li>Maintain comprehensive documentation of all testing procedures, results, and design changes</li><li>Create detailed technical reports and design rationale documents</li><li>Prepare thorough knowledge transfer materials for incoming permanent team members</li><li>Document vendor relationships, component specifications, and design decision history</li><li>Establish clear handoff protocols for ongoing project support</li></ul>Required Qualifications<ul><li>Bachelor's degree in Electrical Engineering, Mechanical Engineering, or equivalent</li><li>8+ years experience in product development with ability to jump into mid-stage projects</li><li>5+ years hands-on experience with Li-Ion battery systems and electrical integration</li><li>Proven track record with DFMEA development and execution</li><li>Strong experience in DVP&amp;R planning and test execution</li><li>EV/HEV experience required; automotive development processes essential</li><li>Exceptional troubleshooting skills and ability to work independently</li><li>Outstanding documentation and technical writing abilities</li><li>Experience with knowledge transfer and project handoffs</li></ul>Essential Skills for This Contract<ul><li>Ability to quickly assess existing project status and technical requirements</li><li>Self-directed work style with minimal ramp-up time required</li><li>Strong analytical skills for interpreting complex test data</li><li>Experience working with lab equipment and test setups</li><li>Proven ability to make sound technical decisions under time constraints</li><li>Excellent communication skills for cross-functional collaboration</li></ul>Contract DetailsDuration: 6 months with potential for extension based on project needs Location: Onsite at Scotts Valley, California headquarters Travel: ~15% domestic and international as project requires Start Date: Immediate availability preferredPhysical Requirements<ul><li>Navigate lab environments and operate technical testing equipment</li><li>Lift up to 50 pounds (battery packs and test equipment)</li><li>Extended periods of detailed technical work and documentation</li></ul>Note: This contract position is ideal for an experienced engineer looking for a focused, high-impact engagement where your expertise will directly influence product success and provide valuable experience in rapid project integration and knowledge transferWe believe diversity is our strength, and inclusion is our foundation. As an Equal Opportunity Employer, we are committed to building a workplace where everyone—regardless of race, ethnicity, gender identity, sexual orientation, disability, age, or background—can thrive. We celebrate individuality, amplify diverse voices, and strive to foster an environment where everyone feels seen, heard, and empowered to do their best work. Together, we’re shaping a future that works for all.

Contract Electrical Battery Systems Engineer

About the Job

About the Company

Zero Motorcycles

Similar Jobs

Advanced Engineer, Electrical Systems (High Voltage/HV)

Advanced Engineer, Electrical Systems (High Voltage/HV)

Electrical Engineering Manager

Electrical Engineering Manager

Electrical Engineering Director

Electrical Engineering Director

Senior Electrical Systems Engineer

Senior Electrical Systems Engineer

Director of Engineering

Director of Engineering

Director of Powertrain Systems Engineering

Director of Powertrain Systems Engineering

Senior Test Engineer (Energy Storage and Distribution Systems)

Senior Test Engineer (Energy Storage and Distribution Systems)

Principal Process Engineer (Battery Cell Assembly and Formation)

Principal Process Engineer (Battery Cell Assembly and Formation)

Senior Electrical Engineer - System Test

Senior Electrical Engineer - System Test

Manager of Power Systems Design Engineering

Manager of Power Systems Design Engineering