<div>The Zoox Firmware team is responsible for the embedded software development of Zoox vehicle’s low-level driving, body, and safety systems to provide autonomous driving software. As the embedded software developer, you will be responsible for developing the drive, control, and body functionality of the Zoox vehicle. In addition, you will work closely with electrical engineers, embedded software engineers, and validation engineers to enable support for new advanced platforms and accelerate application development across multiple projects. We are looking for people who are passionate about diving deep into the hardware and creating robust and reusable software</div> <h3>In this role, you will:</h3><ul><li>Design, develop, and test embedded software for the body, thermal, and control of the Zoox vehicle</li><li>Create software requirements, design documentation, test plans, and other supporting documentation.</li><li>Work cross-functionally with vehicle engineers, control engineers, software engineers, system architects, validation engineers, and other experts to ensure a seamless and highly automated experience for the Zoox vehicle.</li><li>Bring-up new embedded platforms by working with electrical engineers, suppliers, and vendors to identify and solve hardware and low-level software issues.</li><li>Contribute to all phases of the software development cycle including prototyping, requirements capture, design, implementation, and validation</li></ul><h3>Qualifications</h3><ul><li>Bachelor’s or Master’s degree in computer science, electrical engineering, or equivalent experience.</li><li>3+ years of experience developing real-time embedded software for distributed electro-mechanical systems.</li><li>Strong embedded C++/C programming experience </li><li>Strong experience with micro-controllers and/or microprocessors Experience with real-time operating systems on embedded systems (SafeRTOS, QNX, FreeRTOS, etc.)</li><li>Familiarity with modern software development methodologies and tools (Agile, Git, unit testing, CI, etc.)</li></ul><h3>Bonus Qualifications</h3><ul><li>Experience with automotive communication protocols and stacks (CAN, LIN, ethernet, UDS, etc.)</li><li>Familiarity with high-assurance development practices and tools (Polarion, ISO-26262, MISRA C/C++, etc.)</li><li>Hands-on experience with HW bring-up and system debugging using JTAG</li></ul> <div>Compensation</div><div>There are three major components to compensation for this position: salary, Amazon Restricted Stock Units (RSUs), and Zoox Stock Appreciation Rights. The salary range for this position is $133,000 to $209,000. A sign-on bonus may be offered as part of the compensation package. Compensation will vary based on geographic location and level. Leveling, as well as positioning within a level, is determined by a range of factors, including, but not limited to, a candidate's relevant years of experience, domain knowledge, and interview performance. The salary range listed in this posting is representative of the range of levels Zoox is considering for this position.</div><div> </div><div>Zoox also offers a comprehensive package of benefits including paid time off (e.g. sick leave, vacation, bereavement), unpaid time off, Zoox Stock Appreciation Rights, Amazon RSUs, health insurance, long-term care insurance, long-term and short-term disability insurance, and life insurance.</div><div> </div><div>About Zoox</div><div>Zoox is developing the first ground-up, fully autonomous vehicle fleet and the supporting ecosystem required to bring this technology to market. Sitting at the intersection of robotics, machine learning, and design, Zoox aims to provide the next generation of mobility-as-a-service in urban environments. We’re looking for top talent that shares our passion and wants to be part of a fast-moving and highly execution-oriented team.</div><div> </div><div><a href="https://www.linkedin.com/company/zoox-inc">Follow us on LinkedIn</a></div><div> </div><div>Accommodations</div><div>If you need an accommodation to participate in the application or interview process please reach out to accommodations@zoox.com or your assigned recruiter.</div><div> </div><div>A Final Note:</div><div>You do not need to match every listed expectation to apply for this position. Here at Zoox, we know that diverse perspectives foster the innovation we need to be successful, and we are committed to building a team that encompasses a variety of backgrounds, experiences, and skills.</div>

Transforming urban transportation with fully electric autonomous vehicles, challenging car ownership and reducing congestion.

Embedded Software Engineer - Vehicle Systems

At Trane Technologies TM and through our businesses including Trane ® and Thermo King ® , we create innovative climate solutions for buildings, homes, and transportation that challenge what’s possible for a sustainable world. We're a team that dares to look at the world's challenges and see impactful possibilities. We believe in a better future when we uplift others and enable our people to thrive at work and at home. We boldly go.SUMMARYWe have an exciting opportunity for a Senior Project Developer for our Energy Services Company (ESCO) based in the Pacific Southwest Region. As a Senior Project Developer, you will be supporting one of the most challenging and fastest growing career fields, Trane Technologies Energy Services. This role includes working with internal teams and customers to identify and develop turnkey design-build solutions and energy savings contracting projects, including scope of work development, cost estimating, working with Energy Engineers to quantify energy savings, and proposal support as part of an industry leading Energy Services Company (ESCO).The Project Developer is responsible for Acquisition Support of both Design-Build Turnkey and Energy Performance Contracting project work. This position requires mastery of acquisition, technical aptitude and project development skills. Knowledge of the project management processes, and computerized energy simulation tools is considered a plus.Responsibilities/Duties:<ul><li>Audit and fully develop comprehensive energy services solutions including a wide variety of energy conservation measures (ECMs), Facility Improvement Measures (FIMs), and technologies.</li><li>Develop HVAC system solutions using a combination of Trane equipment and controls and other leading HVAC equipment and systems that include project scoping, concept development, engineering analysis, and system validation.</li><li>Supports Account Managers in developing project installation budgets and preparing the sub-contractor request for proposal (RFP) including scope statements, plans and milestone dates; specs; permitting and bonding requirements.</li><li>Manage the complete design including conceptual site plans and preliminary engineering documents through construction and post-construction documents.</li><li>Leads the development of project costs and supports Account Executives in creating project financials and customer facing pro forma.</li><li>Maintains customer satisfaction by developing around Key Performance Indicators (KPI), investigating concerns, implementing corrective action, and communicating with customers or their representative.</li><li>Continually validate the effectiveness of the Design-Build Turnkey and ESPC processes and identify and develop improvements. Working knowledge of cost and savings studies incorporating energy conversation measures.</li><li>Up to 30% travel time within the Pacific Southwest Region</li></ul>QUALIFICATIONS<ul><li>Four-year degree in Engineering, Technical field or Business Required.</li><li>Working knowledge of cost and savings studies incorporating energy conversation measures (ECM).</li><li>Working knowledge of energy rebate programs, utility tariffs and utility bill analysis.</li><li>Must have a general knowledge of basic engineering, electricity, mechanical HVAC systems and the building construction industry.</li><li>Ability to audit existing mechanical and building systems and recommend solutions to improve.</li><li>Understanding of construction methods/practices and ability to communicate with and direct subcontractors in an effort to obtain critical proposal information.</li><li>Highly organized project manager, able to simultaneously mange multiple projects.</li><li>Ability to develop and write HVAC system level sequence of operations and other system level control requirements a benefit.</li><li>Proficiency in Visio, AutoCAD and/or other design software; knowledge of computerized energy simulation tools a plus.</li><li>Some travel with occasional overnight stays.</li><li>Must possess a valid driver’s license for a minimum of 12 months, with no major or frequent traffic violations including, but not limited to:</li><li>DUI, Hit &amp; Run, License Suspension, Reckless / Carless Driving, or multiple smaller infractions or preventable collisions in the previous 3 years.</li></ul>Keywords: Energy Program Manager, Energy Solutions, sustainability, utility consulting, Turnkey, Design-Build, Construction, HVAC Controls, Building Controls, Building Automation, programming, heating, ventilation, air conditioning, direct digital control,Thrive at work and at home:<ul><li>Benefits kick in on DAY ONE for you and your family, including health insurance and holistic wellness programs that include generous incentives – WE DARE TO CARE !</li><li>Family building benefits include fertility coverage and adoption/surrogacy assistance.</li><li>401K match up to 6%, plus an additional 2% core contribution = up to 8% company contribution.</li><li>Paid time off, including in support of volunteer and parental leave needs.</li><li>Educational and training opportunities through company programs along with tuition assistance and student debt support .</li><li>Learn more about our benefits here (https://careers.tranetechnologies.com/global/en/benefits) !</li></ul>Salary: $95,000 - $140,000 base salary, plus incentive opportunityDisclaimer: This "range" could be a result of seniority, merit, geographic location where the work is performed, education, experience, travel requirements for the job, or because of a system the employer uses to measure earnings by quantity or quality of production (so, for example, positions that may not have traditional salary ranges).We offer competitive compensation and comprehensive benefits and programs. We are an equal opportunity employer; all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, pregnancy, age, marital status, disability, status as a protected veteran, or any legally protected status.

Regional Energy Services & Contracting Project Developer

<div>Simulation is key to ensuring the safety of autonomous vehicles at Zoox. In this critical role, you will ensure Zoox’s simulation framework is a trustable platform for AI driving software validation, by analyzing the accuracy and realism of the simulator, and how effective the sim platform is at predicting real-world driving performance. You will work cross-functionally with our AI/autonomy teams, systems engineering and safety analysis teams, QA teams, and more, to measure and guide improvements to our simulation platform.</div> <h3>Responsibilities</h3><ul><li>You will derive requirements and perform system verification/validation for simulation frameworks and tools.</li><li>You will drive planning and execution by decomposing system needs into projects, tools, and/or features that deliver incremental value to teams and customers.</li><li>You will build metrics and tools which measure and continuously monitor simulation validity in alignment with company objectives.</li><li>You will lead analyses of tools/frameworks and communicate results across stakeholders, driving continuous improvement to software components.</li><li>You will collaborate with Engineering Managers to ensure design, implementation, and programs are on track, and regularly drive consensus among diverse partners on technical projects.</li><li>You will develop clear proposals and design documents for large-scope or multi-functional initiatives.</li><li>You will design and build statistically-sound analyses, sampling methods, validation criteria, and development processes for building highly relevant datasets for evaluation applications.</li><li>You will build tools to mine large-scale logs and simulated data for the most interesting situations.</li><li>Your typical workload: 30% validation strategy 30% coding, 40% dataset development and statistical analysis. </li></ul><h3>Qualifications</h3><ul><li>8+ years of experience in decomposing and analyzing large, complex systems.</li><li>Experience in systems engineering, requirements authoring, system analysis, and validation/testing.</li><li>Experience developing, specifying, and/or validating simulation-based testing technologies for autonomous, robotics, or other complex integrated systems.</li><li>Fluent in data-based and analytical engineering problem-solving practices, including using paretos and root cause analysis.</li><li>Databricks, Jupyter Notebooks experience.</li><li>Proficient with Python, SQL, or similar for analysis of large datasets.</li><li>BS, MS, or Ph.D. in Computer Science, Mechanical Engineering, Robotics, or equivalent experience</li></ul> <div>Compensation</div><div>There are three major components to compensation for this position: salary, Amazon Restricted Stock Units (RSUs), and Zoox Stock Appreciation Rights. The salary will range from $193,000 to $328,000. A sign-on bonus may be part of a compensation package. Compensation will vary based on geographic location, job-related knowledge, skills, and experience.  </div><div> </div><div>Zoox also offers a comprehensive package of benefits including paid time off (e.g. sick leave, vacation, bereavement), unpaid time off, Zoox Stock Appreciation Rights, Amazon RSUs, health insurance, long-term care insurance, long-term and short-term disability insurance, and life insurance.</div><div> </div><div>About Zoox</div><div>Zoox is developing the first ground-up, fully autonomous vehicle fleet and the supporting ecosystem required to bring this technology to market. Sitting at the intersection of robotics, machine learning, and design, Zoox aims to provide the next generation of mobility-as-a-service in urban environments. We’re looking for top talent that shares our passion and wants to be part of a fast-moving and highly execution-oriented team.</div><div> </div><div><a href="https://www.linkedin.com/company/zoox-inc">Follow us on LinkedIn</a></div><div> </div><div>Accommodations</div><div>If you need an accommodation to participate in the application or interview process please reach out to accommodations@zoox.com or your assigned recruiter.</div><div> </div><div>A Final Note:</div><div>You do not need to match every listed expectation to apply for this position. Here at Zoox, we know that diverse perspectives foster the innovation we need to be successful, and we are committed to building a team that encompasses a variety of backgrounds, experiences, and skills.</div>

Senior/Staff Systems Engineer - Simulation Verification & Validation

<div>About the Role</div><div>The Firmware Architecture team at Zoox is responsible for guiding the development of our embedded systems and the firmware that makes them tick. Our team collaborates with other firmware, hardware, software, systems, and safety teams across Zoox to build complex systems designed for challenging automotive environments.</div><div> </div><div>Together with the team, you will define the firmware architecture of our embedded systems and work with our cross-functional partners to drive the development of our next-generation robot. We are looking for a firmware engineer who is excited to work across our entire stack, loves to learn new things, and likes to take ownership of major components. If you like to drive the design and development of complex embedded systems, we would like to hear from you.</div><div> </div><div> </div> <h3>In this role, you will:</h3><ul><li>Use your leadership skills to collaborate with our firmware leads, enabling them to design the architecture of our ECUs and create requirements, design documentation, test plans, and other supporting documentation. </li><li>With our safety and systems teams to ensure our firmware development follows industry standards and processes (ISO-26262, etc.)</li><li>Work closely with our hardware engineers and safety teams to develop the future platforms that will power our next-generation robots. </li><li>Evaluate operating systems, frameworks, and tools to provide technical direction for the firmware organization. </li><li>Provide technical guidance and assistance to engineering teams at Zoox to solve challenging firmware issues.</li></ul><h3>Qualifications</h3><ul><li>Bachelor’s or Master’s degree in computer science, electrical engineering, mechanical engineering, or equivalent experience.</li><li>At least 9 years of experience developing highly available mission-critical embedded software. </li><li>Strong embedded C/C++ programming experience.</li><li>Experience with high-assurance development practices and tools (Polarion, ISO-26262, AUTOSAR/MISRA, etc.)</li><li>History of providing technical leadership and guidance to other teams, enabling them to achieve their goals and deliver impact. </li></ul><h3>Bonus Qualifications </h3><ul><li>Understanding of vehicle dynamics, automotive sensors and actuators, and communication protocols.</li><li>Familiarity with Hazard and Risk Assessment (HARA) and/or Failure Mode and Effects Analysis (FMEA).</li></ul> <div>Compensation</div><div>There are three major components to compensation for this position: salary, Amazon Restricted Stock Units (RSUs), and Zoox Stock Appreciation Rights. The salary range for this position is $188,000 to $275,000. A sign-on bonus may be offered as part of the compensation package. Compensation will vary based on geographic location and level. Leveling, as well as positioning within a level, is determined by a range of factors, including, but not limited to, a candidate's relevant years of experience, domain knowledge, and interview performance. The salary range listed in this posting is representative of the range of levels Zoox is considering for this position.</div><div> </div><div>Zoox also offers a comprehensive package of benefits including paid time off (e.g. sick leave, vacation, bereavement), unpaid time off, Zoox Stock Appreciation Rights, Amazon RSUs, health insurance, long-term care insurance, long-term and short-term disability insurance, and life insurance.</div><div> </div><div>About Zoox</div><div>Zoox is developing the first ground-up, fully autonomous vehicle fleet and the supporting ecosystem required to bring this technology to market. Sitting at the intersection of robotics, machine learning, and design, Zoox aims to provide the next generation of mobility-as-a-service in urban environments. We’re looking for top talent that shares our passion and wants to be part of a fast-moving and highly execution-oriented team.</div><div> </div><div><a href="https://www.linkedin.com/company/zoox-inc">Follow us on LinkedIn</a></div><div> </div><div>Accommodations</div><div>If you need an accommodation to participate in the application or interview process please reach out to accommodations@zoox.com or your assigned recruiter.</div><div> </div><div>A Final Note:</div><div>You do not need to match every listed expectation to apply for this position. Here at Zoox, we know that diverse perspectives foster the innovation we need to be successful, and we are committed to building a team that encompasses a variety of backgrounds, experiences, and skills.</div>

Senior/Staff Embedded Software Engineer - Firmware Architecture

<div><div>Anaergia Graduate Program - Graduate Project Engineer  About Us: Anaergia (TSX: ANRG) is a global leader in offering sustainable solutions for the production of clean energy and the conversion of waste streams to resources. Through a proven portfolio of proprietary technological solutions, Anaergia maximizes the generation of renewable energy, diversion of waste from landfill, and reduction of greenhouse gases for customers across the municipal, industrial, commercial, and agricultural sectors. Headquartered in Burlington, ON, and through its multiple subsidiaries across North America, Europe, Africa, and Asia, Anaergia is trusted at more than 1,600 installations globally. Job Goal: Consistently coordinate the assigned engineering activities to complete the project’s design in compliance with the project schedule and with the budget; observing the correctness and the completeness of the provided information. Understand the scope of the work, the contract requirements, and the limit of supply; Coordinate all the Engineering activities to complete the design of the project; Meet / improve the project schedule, budget intended for all engineering activities, quality standards, and overall project. Identify and submit possible “cost-effective” improvements in the design; Quickness and flexibility in responses to urgent questions from PMs and from the sales department;  Job Responsibilities: All tasks below for Graduate Project Engineer are accomplished with direct supervision of a project engineer II or III or other technical lead on the project as defined. A Graduate Project Engineer may function as a technical lead on a project under direct supervision of a PE II or III.<ul><li>Arrange the general document list agreeing with the PM and in compliance with the contract and the external/internal resources availability;</li><li>Plan the engineering activities for all assigned projects and monitor the activities progress in compliance with the schedule defined on the general document list;</li><li>Agree with the PM to define the budget assigned for the Project Engineering activities through the entire life of the project;</li><li>Regularly update the PM on the status of the design, and the remaining budget to identify possible risks in advance and plan solutions accordingly;</li><li>Provide to PMs the technical specifications and tender documents for the acquisition of the materials expected for each project in accordance with the terms of supply and properly calculated according to the design</li><li>Provide technical support to client as needed under the guidance of the PM;</li><li>Provide technical review of all third-party design consultants;</li><li>Provide technical review of equipment proposals and submittals;</li><li>Check all the licensing documents and incorporate permit conditions;</li><li>Coordinates regular design review meetings with the project team;</li><li>Create risk assessment for each project to identify risks and their mitigation. Make sure to comply with the local standards required for each specific project;</li><li>Organize regular meetings (weekly) to share and update the progress of the engineering activities for all jobs; and point out any problems emerged during the engineering development;</li><li>Support of the site manager and subcontractors/vendors regarding specific technical questions on the project design;</li><li>Organize regular meetings (bi-weekly) with the appropriate person responsible for each topic in order to submit improvements of technical aspects and building solutions. Involve the Project Engineering Leader (PEL) when necessary;</li><li>Update the Project Engineering Leader (PEL) about the status of the project, status of the budget, and for any identified issue, which requires actions from upper-level management;</li></ul>PE is authorized to: Have T&amp;L costs in compliance with the function’s budget set by the PM. Safety &amp; Quality-Related Job Responsibilities:<ul><li>The PE is responsible for the rigorous application of the company rules and standards regarding engineering activities, for the accuracy of the information provided and for compliance with the contract requirements and specification of each project.</li><li>Compliance with safety is priority for Anaergia.</li></ul> <ul><li>During the entire design activity, the Project Engineer shall assess all aspects related to health risks and safety through all phases of the project (design, construction, operation, maintenance and dismantling) and take actions to eliminate, mitigate, and advise all involved figures about the remaining</li></ul> Job Requirements: Education <ul><li>Bachelor’s Degree in an applicable Engineering discipline required. A Master’s Degree or other advanced degree is desired.</li><li>Preferred degrees include Civil Engineering / Mechanical engineering/ Chemical Engineering/ Electrical Engineering or equivalent</li></ul> Experience<ul><li>0 to 2 years of relevant experience or studies</li></ul> Competencies<ul><li>Read architectural, mechanical and electrical plans and have a solid understanding of basic electrical and mechanical control systems.</li><li>Knowledge of Visio, Word, SharePoint, and PowerPoint.</li><li>Expert Knowledge of MS Excel.</li><li>Ability to use CAD software</li><li>Outstanding interpersonal oral and written communication skills required.</li><li>Outstanding presentation skills.</li><li>Demonstrated ability to manage multiple projects and prioritize activities.</li><li>High energy, self-motivated, goal focused individual.</li></ul></div></div>

Anaergia was created to eliminate a major source of greenhouse gases by cost effectively turning organic waste into renewable natural gas (biomethane), fertilizer and water. With a proven track record of delivering world-leading projects on four continents, Anaergia is uniquely positioned to provide end-to-end solutions for extracting organics from waste, implementing high efficiency anaerobic digestion, upgrading biogas, producing fertilizer and cleaning water. Our customers are in the municipal solid waste, municipal wastewater, agriculture, and food processing industries. In each of these markets Anaergia has built many successful plants including some of the largest in the world.

We operate out of regional locations in the U.S., Canada, United Kingdom, Germany, Italy, South Africa, and Singapore.


Graduate Project Engineer

<div><div>Anaergia Graduate Program - Graduate Process Engineer (Carlsbad Office) About Us: Anaergia (TSX: ANRG) is a global leader in offering sustainable solutions for the production of clean energy and the conversion of waste streams to resources. Through a proven portfolio of proprietary technological solutions, Anaergia maximizes the generation of renewable energy, diversion of waste from landfill, and reduction of greenhouse gases for customers across the municipal, industrial, commercial, and agricultural sectors. Headquartered in Burlington, ON, and through its multiple subsidiaries across North America, Europe, Africa, and Asia, Anaergia is trusted at more than 1,600 installations globally. Job Goal: The Process Engineer (PE) represents the technical aspects of all of Anaergia’s Project. The PE is responsible for providing technical deliverables in support for the Business Development of all Anaergia Projects form the origination phase through contract negotiation and hand over to the Anaergia Project Execution Team through commission and operation of Anaergia’s Facilities. The PE must take an integrated view of the project and ensure Anaergia’s best practices and standards are implemented in all project deliverables to ensure a consistent and coordinated technical approach for all projects. The PE is also responsible for meeting deadlines and quality requirements effectively with resources allocated in an efficient manner. The PE will directly report to the Director of Process Engineering with main interfaces to other departments including Business Development, Project Engineering, and Plant Operations.  Responsibilities:<ul><li>Basic &amp; detailed Design Engineering activities for the assigned project(s) in Anaerobic Digestion Plants, Municipal Solid Waste, Biogas Treatment &amp; Biogas Upgrading, etc., in accordance with the Company established procedures.</li><li>Develop and review conceptual designs.</li><li>Develop and review Process Flow Diagrams (PFD) and Piping and Instrumentation Diagrams (P&amp;IDs).</li><li>Process engineering calculations including heat and material balances.</li><li>Basis of design process scope documents.</li><li>Participate in project review meetings with all stakeholders.</li><li>Review and advise on equipment layouts.</li><li>Perform Process equipment sizing calculations, develop specifications and data sheets using Anaergia standard details and templates for major project equipment.</li><li>Develop Equipment, instrument, valve, line, and specialty items lists.</li><li>Interface with other internal engineering disciplines to ensure a coordinated design and complete engineering deliverables.</li><li>Accountable for the successful completion of assigned engineering tasks and preparation of engineering deliverables.</li><li>Interface with plant operations to perform biological commissioning, resolve technical issues, and monitor process information to assist with plant optimization.</li><li>Perform lab tests and manage pilot projects</li></ul> Job Requirements: Education<ul><li>Bachelor’s Degree in an appliable Engineering discipline required. A Master’s Degree or other advanced degree is desired.</li></ul> Experience<ul><li>0 to 2 years of engineering experience.</li></ul> Competencies<ul><li>Read architectural, mechanical and electrical plans and have a solid understanding of basic electrical and mechanical control systems.</li><li>Knowledge of Visio, Word, SharePoint and PowerPoint.</li><li>Expert Knowledge of MS Excel.</li><li>Ability to use CAD software</li><li>Outstanding interpersonal oral and written communication skills required.</li><li>Outstanding presentation skills.</li><li>Demonstrated ability to manage multiple projects and prioritize activities.</li><li>High energy, self-motivated, goal-focused individual.</li><li>Previous experience in process engineering in a related field is preferred.</li></ul> For additional information on Anaergia, please visit www.anaergia.comAs an Equal Opportunity Employer, Anaergia provides equal employment opportunity (EEO) to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, or any other characteristic protected by federal, state or local law. In addition, Anaergia will provide reasonable accommodations for qualified individuals with disabilities.</div></div>

Graduate Process Engineer

<div><div>About Us: Anaergia (TSX: ANRG) is a global leader in offering sustainable solutions to produce clean energy and the conversion of waste streams to resources. Through a proven portfolio of proprietary technological solutions, Anaergia maximizes the generation of renewable energy, diversion of waste from landfill, and reduction of greenhouse gases for customers across the municipal, industrial, commercial and agricultural sectors. Headquartered in Burlington, ON, and through its multiple subsidiaries across North America, Europe, Africa, and Asia, Anaergia is trusted at more than 1,600 installations globally. Job Overview: This position is responsible for analyzing production processes, equipment, utilities, waste treatment facilities, and infrastructure for the purpose of improving safety, quality, and productivity by making changes to the equipment design or operational procedures.  Additionally, the position will support plant operations teams across North America in troubleshooting and assisting in capital improvement project management. Job Responsibilities: <ul><li> Work with our plant teams and the client, where appropriate, to develop expectations and then work with the site operations and third parties to meet those expectations.</li></ul> <ul><li> Monitor or conduct observation and analysis of daily unit production to determine the improvements needed.</li></ul> <ul><li> Interface collaboratively with other technology resources in the organization to bring appropriate resources into the unit to resolve problems beyond the scope of the production engineering position.</li></ul> <ul><li> Work closely with operations personnel to identify and resolve issues impacting</li></ul> <ul><li> Conduct formal Root Cause Analysis of events affecting plant</li></ul> <ul><li> Assist in training operators to maximize the safety, quality, and productivity of the</li></ul> <ul><li> Analyze work study data and equipment specifications to establish time and production</li></ul> <ul><li> Apply mathematical analysis to determine validity and reliability of sampling and work-study</li></ul> <ul><li> Develop Standard Operating Procedures and training criteria for new and modified equipment to ensure safe and efficient operation.</li></ul> <ul><li> Coordinate efforts with engineering to design and install new</li></ul> <ul><li> Aid in commissioning of new equipment, including writing procedures and</li></ul> <ul><li> Generate various production reports at intervals for management and other company</li></ul> <ul><li> Provide input into raw material inventory management, including RM</li></ul> <ul><li> Design and perform unit process experiments to optimize</li></ul> <ul><li> Any other tasks assigned by the direct supervisor to assist in the reliability, efficiency, or safety of the department.</li></ul>  Job Requirements: Education and ExperienceRequires a minimum of a Bachelor’s Degree in Engineering or a related field and one (1) to three (3) years related experience; or an equivalent combination of education and experienceTravel is estimated to be 15%-40%, depending on need. SkillsThe Operations Engineer has the following skillsets: <ul><li> Proficiency with Microsoft Office</li></ul> <ul><li> Good Statistical/data Analysis skills using various big data tools available.</li></ul> <ul><li> A good working knowledge of the processes and controls controlling those processes.</li></ul> <ul><li> Skills within I&amp;C which allow you to independently troubleshoot and develop solutions.</li></ul> <ul><li> Low voltage electrical troubleshooting skills.</li></ul> <ul><li> Mechanical skills should help diagnose mechanical problems as well as understand the mechanical requirements and/or deficiencies of various equipment with the outlook of resolving those issues.</li></ul> <ul><li> Must be able to plan and schedule individual workload without close</li></ul> <ul><li> Ability to work with cross-functional teams and engage/gain the respect of the hourly</li></ul> <ul><li> Able to make a clear and convincing presentation of ideas in written and verbal</li></ul> <ul><li> Able to track a multitude of details without losing sight of the overall end</li></ul> <ul><li> Active listening skills</li></ul> <ul><li> Must understand the long-term needs of the customers, both internal and external and be driven to meet those needs.</li></ul> <ul><li> Fluent in English</li></ul>  For additional information on Anaergia, please visit <a href="http://www.anaergia.com/">www.anaergia.com</a>As an Equal Opportunity Employer, Anaergia provides equal employment opportunity (EEO) to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, or any other characteristic protected by federal, state or local law. In addition, Anaergia will provide reasonable accommodations for qualified individuals with disabilities.About Us: </div></div>

Operating Engineer

<div><div>COMMISSIONING ENGINEER - WASTEWATER/WASTE SPECIALIST Company Description: Anaergia is a global leader in the production of clean energy, fertilizer, and recycled water from virtually any waste stream, offering the widest range of maximizing resource recovery solutions for the municipal, industrial, commercial and agricultural markets. Anaergia’s integrated solutions create value for its customers in the forms of renewable energy, quality fertilizers, and clean water, while dramatically reducing the cost of waste management. Anaergia delivers integrated solutions globally through established offices in North America, Europe, Africa, and Asia and its breakthrough technologies are in use at over a thousand resource recovery facilities worldwide, reducing greenhouse gas emissions while creating new revenue sources for its clients. Job DescriptionThis role reports to the Commissioning Manager.  Commissioning Engineer Goals<ul><li>Ensure planning, coordination and cooperation between sub-contractors and vendors on site.</li><li>Ensure the application of the highest safety standard in the start-up and commissioning phase as well as the full compliance to the safety rules.</li><li>Fulfill the agreed reporting with reliable data and within the requested deadline.</li><li>Ensure that all equipment supplied by Anaergia and plant functional tests have been carried out.</li><li>Establish and maintain the Commissioning Program.</li><li>Ensure relevant documentation is in place.</li><li>Ensure correct procedures are followed.</li><li>Ensure a safe system of work is established and maintained</li><li>Coordinate training and ensure that training programs are completed as specified.</li><li>Provide/assist in training activities on the relevant equipment</li><li>Produce Risk Assessments and Method Statements (RAMS) for specific commissioning activities as required.</li><li>Review the RAMS of sub-contractor commissioning or undertaking remedial work on the plant</li><li>Manage the activities of sub-contract commissioning teams.</li><li>Report non-conformance issues to the Commissioning Manager.</li><li>Update drawings and operational documentation to reflect changes made during the commissioning phase.</li><li>Ensure that Site Acceptance Tests (SAT’s) are completed, defects recorded, and arrangements made to rectify any plant faults.</li></ul> Commissioning Engineer Tasks<ul><li>Prior to the start of commissioning, obtain all up-to-date As-Built documentation (Drawings, test sheets, contingency plans). Retain a copy of this on site.</li><li>Carry out the commissioning process and tests in accordance with approved procedures and checklists, identify additional requirements for testing as required, prepare documentation and procedures to allow commissioning activities, and ensure commissioning activities are carried out in a safe manner. o Monitor and plan the delivery of supplies and services (expediting &amp; logistics) unless it is not covered by the supply chain</li><li>Manage the activities of sub-contract commissioning teams.</li><li>Manage directly and/or via contractors the Quality Assurance / Quality Control;</li><li>Provide technical knowledge for all areas of the plant.</li><li>Arrange for operations staff to attend scheduled training sessions</li><li>Follow and adhere to the commissioning schedule;</li><li>Maintain works methodologies, contractor test plans, and equipment check sheets;</li><li>Complete I/O check sheets for digital input/outputs and analog input/outputs.</li><li>Coordinate all resources involved in site activities, both internal or external (outsourcers/sub-contractors), either through the updating and distributing of detailed schedules and/or setting regular site meetings;</li><li>Early identification of project risks for and early adoption of appropriate countermeasures;</li><li>Manage relationships with vendor and sub-contractor for what is concerning technical issues and organization of tasks, including technical correspondence, leaving to the PM the management of contractual-related communication;</li><li>Complete relevant commissioning test sheets.</li><li>Manage and update defects/punch lists.</li><li>Configuring and setup of PLC hardware and HMI Panels.</li><li>Troubleshooting PLC code, confirming signals to and from PLC inputs/outputs, and field instruments.</li><li>Configuring and setup of instrumentation devices in the field.</li><li>Configuring and setup of industrial communication devices and protocol/signal converters.</li><li>Troubleshooting industrial network devices and communication equipment in the field.</li></ul>  Job Requirements: Education: Holds a technical diploma or graduation in  / Mechanical engineering/ Electrical Engineering/ Mechatronics Engineering, Automation &amp; Instrumentation Technologist or Technician  equivalent  Experience: Minimum of 5 years experience as a Commissioning Engineer in the Industrial Plant business.  Competencies:The Commissioning Engineer has the following technical skillsets:<ul><li>Deeply understands and has the ability to manage contracts for supplying complex plants;</li><li>Specialty in control systems, industrial networks, and communication protocols, programming PLCs, development of SCADA systems, and experience with Siemens S7 via TIA Portal and Allen Bradley Controllogix and Compactlogix via Studio 5000.</li><li>Specialty in programming HMI Panels, experience with Siemens Intouch and Allen Bradley PanelView series HMI’s.</li><li>Solid Waste / Wastewater / Biogas / Power Generation specific competencies.</li><li>Some experience in purchasing is required;</li><li>Ability to manage detailed job schedules;</li><li>Knowledgeable in “site” project administration;</li><li>Skilled in understanding technical drawings, documents, and specifications;</li><li>Widely, rather than deeply, knowledgeable in all the disciplines involved with the construction and installation (civil, mechanical, electrical, instrumental, etc.);</li><li>Knowledgeable in construction codes and regulations;</li><li>Knowledgeable in quality control of all supplies;</li><li>Experienced in training resources on safety and technical matters</li><li>Experienced in managing relationships with Customers;</li><li>Experienced in leading and coordinating the assigned resources;</li></ul> Location:This would be a remote role with nearly 60-70% travel included at project sites, and remaining work in a hybrid/remote setup. This could be located in either Carlsbad, Rhode Island, or Charlotte.The contract time frame is between 6 -9 months. </div></div>

Automation Commissioning Engineer II - Contract

<div><div>COMMISSIONING ENGINEER - WASTEWATER/WASTE SPECIALIST Company Description: Anaergia is a global leader in the production of clean energy, fertilizer, and recycled water from virtually any waste stream, offering the widest range of maximizing resource recovery solutions for the municipal, industrial, commercial, and agricultural markets. Anaergia’s integrated solutions create value for its customers in the forms of renewable energy, quality fertilizers and clean water, while dramatically reducing the cost of waste management. Anaergia delivers integrated solutions globally through established offices in North America, Europe, Africa, and Asia and its breakthrough technologies are in use at over a thousand resource recovery facilities worldwide, reducing greenhouse gas emissions while creating new revenue sources for its clients. Job DescriptionThis role reports to the Commissioning Manager.  Commissioning Engineer Goals<ul><li>Ensure planning, coordination and cooperation between sub-contractors and vendors on site.</li><li>Ensure the application of the highest safety standards in the start-up and commissioning phase as well as full compliance with the safety rules.</li><li>Fulfill the agreed reporting with reliable data and within the requested deadline.</li><li>Ensure that all equipment supplied by Anaergia and plant functional tests have been carried out.</li><li>Establish and maintain the Commissioning Program.</li><li>Ensure relevant documentation is in place.</li><li>Ensure correct procedures are followed.</li><li>Ensure a safe system of work is established and maintained</li><li>Coordinate training and ensure that training programs are completed as specified.</li><li>Provide/assist in training activities on the relevant equipment</li><li>Produce Risk Assessments and Method Statements (RAMS) for specific commissioning activities as required.</li><li>Review the RAMS of sub-contractor commissioning or undertaking remedial work on the plant</li><li>Manage the activities of sub-contract commissioning teams.</li><li>Report non-conformance issues to the Commissioning Manager.</li><li>Update drawings and operational documentation to reflect changes made during the commissioning phase.</li><li>Ensure that Site Acceptance Tests (SAT’s) are completed, defects recorded, and arrangements made to rectify any plant faults.</li></ul> Commissioning Engineer Tasks<ul><li>Prior to start of commissioning, obtain all up-to-date As-Built documentation (Drawings, test sheets, contingency plans). Retain a copy of this on-site.</li><li>Carry out the commissioning process and tests in accordance with approved procedures and checklists, identify additional requirements for testing as required, prepare documentation and procedures to allow commissioning activities, and ensure commissioning activities are carried out in a safe manner. Monitor and plan the delivery of supplies and services (expediting &amp; logistics) unless it is not covered by supply chain</li><li>Manage the activities of sub-contract commissioning teams.</li><li>Manage directly and/or via contractors the Quality Assurance / Quality Control;</li><li>Provide technical knowledge for all areas of the plant.</li><li>Arrange for operations staff to attend scheduled training sessions</li><li>Follow and adhere to the commissioning schedule;</li><li>Maintain works methodologies, contractor test plans, and equipment check sheets;</li><li>Complete I/O check sheets for digital input/outputs and analog input/outputs.</li><li>Coordinate all resources involved in site activities, both internal or external (outsourcers/sub-contractors), either through the updating and distributing of detailed schedules and/or setting regular site meetings;</li><li>Early identification of project risks for and early adoption of appropriate countermeasures;</li><li>Manage relationships with vendor and sub-contractor for what is concerning technical issues and organization of tasks, including technical correspondence, leaving to the PM the management of contractual-related communication;</li><li>Complete relevant commissioning test sheets.</li><li>Manage and update defects/punch lists.</li><li>Configuring and setup of PLC hardware and HMI Panels.</li><li>Troubleshooting PLC code, confirming signals to and from PLC inputs/outputs, and field instruments.</li><li>Configuring and setup of instrumentation devices in the field.</li><li>Configuring and setup of industrial communication devices and protocol/signal converters.</li><li>Troubleshooting industrial network devices and communication equipment in the field.</li></ul>  Job Requirements: Education: Holds a technical diploma or graduation in Mechanical Engineering / Electrical Engineering / Mechatronics Engineering, Automation &amp; Instrumentation Technologist or Technician equivalent.  Experience: Minimum of 5 years experience as a Commissioning Engineer in the Industrial Plant business.  Competencies:The Commissioning Engineer has the following technical skillsets:<ul><li>Deeply understands and has the ability to manage contracts for supplying complex plants;</li><li>Specialty in control systems, industrial networks and communication protocols, programming PLCs, development of SCADA systems, and experience with Siemens S7 via TIA Portal and Allen Bradley Controllogix and Compactlogix via Studio 5000.</li><li>Specialty in programming HMI Panels, experience with Siemens Intouch and Allen Bradley PanelView series HMI’s.</li><li>Solid Waste / Wastewater / Biogas / Power Generation specific competencies.</li><li>Some experience in purchasing is required;</li><li>Ability to manage detailed job schedules;</li><li>Knowledgeable in “site” project administration;</li><li>Skilled in understanding technical drawings, documents, and specifications;</li><li>Widely, rather than deeply, knowledgeable in all the disciplines involved with the construction and installation (civil, mechanical, electrical, instrumental, etc.);</li><li>Knowledgeable in construction codes and regulations;</li><li>Knowledgeable in quality control of all supplies;</li><li>Experienced in training resources on safety and technical matters</li><li>Experienced in managing relationships with Customers;</li><li>Experienced in leading and coordinating the assigned resources;</li></ul> Location:This would be a remote role with nearly 60-70% travel included at project sites, and the remaining work in a hybrid/remote setup.This could be located in either Carlsbad, Rhode Island, or Charlotte.</div></div>

Automation Commissioning Engineer II

<div><div>Anaergia Graduate Program - Graduate Process Engineer (Carlsbad Office) About Us:Anaergia (TSX: ANRG) is a global leader in offering sustainable solutions for the production of clean energy and the conversion of waste streams to resources. Through a proven portfolio of proprietary technological solutions, Anaergia maximizes the generation of renewable energy, diversion of waste from landfill and reduction of greenhouse gases for customers across the municipal, industrial, commercial, and agricultural sectors. Headquartered in Burlington, ON, and through its multiple subsidiaries across North America, Europe, Africa, and Asia, Anaergia is trusted at more than 1,600 installations globally. Job Goal:The Process Engineer (PE) represents the technical aspects of all of Anaergia’s Project. The PE responsible for providing technical deliverables in support for Business Development of all Anaergia Projects form the origination phase through contract negotiation and hand over to Anaergia Project Execution Team through commission and operation of Anaergia’s Facilities. The PE must take an integrated view of the project and ensure Anaergia’s best practices and standards are implemented in all project deliverables to ensure a consistent and coordinated technical approach for all projects. The PE is also responsible for meeting deadlines and quality requirements effectively with resources allocated in an efficient manner. The PE will directly report to the Director of Process Engineering with main interfaces to other departments including Business Development, Project Engineering, and Plant Operations. Responsibilities:<ul><li>Basic &amp; detail Design Engineering activities for the assigned project(s) in Anaerobic Digestion Plants, Municipal Solid Waste, Biogas Treatment &amp; Biogas Upgrading, etc., in accordance with the Company established procedures.</li><li>Develop and review conceptual designs.</li><li>Develop and review Process Flow Diagrams (PFD) and Piping and Instrumentation Diagrams (P&amp;IDs).</li><li>Process engineering calculations including heat and material balances.</li><li>Basis of design process scope documents.</li><li>Participate in project review meetings with all stakeholders.</li><li>Review and advise on equipment layouts.</li><li>Perform Process equipment sizing calculations, develop specifications and data sheets using Anaergia standard details and templates for major project equipment.</li><li>Develop Equipment, instrument, valve, line and specialty items lists.</li><li>Interface with other internal engineering disciplines to ensure a coordinated design and complete engineering deliverables.</li><li>Accountable for the successful completion of assigned engineering tasks and preparation of engineering deliverables.</li><li>Interface with plant operations to perform biological commissioning, resolve technical issues, and monitor process information to assist with plant optimization.</li><li>Perform lab tests and manage pilot projects</li></ul> Job Requirements:Education<ul><li>Bachelor’s Degree in an appliable Engineering discipline required. Master’s Degree or other advanced degree is desired. </li></ul> Experience<ul><li>0 to 2 years of engineering experience.</li></ul> Competencies<ul><li>Read architectural, mechanical and electrical plans and have a solid understanding of basic electrical and mechanical control systems.</li><li>Knowledge of Visio, Word, SharePoint and PowerPoint.</li><li>Expert Knowledge of MS Excel.</li><li>Ability to use CAD software</li><li>Outstanding interpersonal oral and written communication skills required.</li><li>Outstanding presentation skills.</li><li>Demonstrated ability to manage multiple projects and prioritize activities.</li><li>High energy, self-motivated, goal focused individual.</li><li>Previous experience in process engineering in a related field is preferred.</li></ul></div></div>

Graduate Process Engineer (Carlsbad Office)

<div><div>INDUSTRIAL PROJECT MANAGER (WASTE/WASTEWATER) *This role will be either based in Carlsbad, California OR Charlotte, North Carolina, USA and we are open to accepting applications from either of these regions. It will be a hybrid remote/office role with schedule flexibility* About Us:Anaergia (TSX: ANRG) is a global leader in offering sustainable solutions for the production of clean energy and the conversion of waste streams to resources. Through a proven portfolio of proprietary technological solutions, Anaergia maximizes the generation of renewable energy, diversion of waste from landfill and reduction of greenhouse gases for customers across the municipal, industrial, commercial and agricultural sectors. Headquartered in Burlington, ON, and through its multiple subsidiaries across North America, Europe, Africa, and Asia, Anaergia is trusted at more than 1,600 installations globally. Job Responsibilities:<ul><li>This role reports to the Director of Project Execution</li><li>Project Manager Goals - <ul><li>Meet/improve the as sold project budget</li><li>Meet/improve the as sold project schedule</li><li>Achieve/exceed the Customer expectations/satisfaction</li><li>Develop and submit the agreed documents and reporting within the agreed time</li><li>Manage job’s risks by a proper identification and mitigation plan</li><li>Manage opportunities to grow project’s revenues and GPs</li></ul></li></ul> <ul><li>Project Manager Tasks - <ul><li>read and understand the contractual terms to consistently deliver the supply in compliance with all the contractual obligations;</li><li>early identification of project risks for and early adoption of appropriate countermeasures;</li><li>manage the relationship with customer under any aspect, including in-out official correspondence, calling/attending meetings, minor contractual changes</li><li>Manage sub-contractors, suppliers and purchasing processes;</li><li>Lead the resources appointed to the job, ensuring timely and consistent deliveries;</li><li>organization of project team including leadership, setting of priorities and dates, conflict management, team motivation</li><li>Ensure coordination and communication within the project team;</li><li>Comply to the “reporting plan” sending requested reports in the requested date with reliable data;</li><li>Create and update the Job Schedule on a regular</li><li>Support sales department with contract negotiation, contract closure and time schedules</li><li>Understand all applicable local regulations and communicate to project team</li><li>Ensure project team adheres to QA/QC plan</li><li>The Project Manager is authorized to:<ul><li>Sign job’s correspondence to Customers and Vendors;</li></ul></li></ul></li></ul> <ul><li>Sign POs within DOA’s limits;</li><li>Authorize per project related function’s budget for labor, T&amp;L within the limits set by</li></ul><ul><li>responsible for the rigorous application of the company rules regarding the project development, the accuracy of reported data and the respect of the contractual/agreed deadlines.</li></ul> Job Requirements:Education<ul><li>Holds a technical diploma or graduation in: Civil Engineering / Mechanical engineering/ Electrical Engineering/ Chemical Engineering or equivalent</li></ul> Experience<ul><li>Mature experience as Project Manager in the Industrial Plant business.</li></ul> Competencies:The PM has the following technical skillsets:<ul><li>Deeply understands and is able to manage contracts for supplying complex plants;</li><li>Understands risk assessment and mitigation</li><li>Is experienced in managing relationship with the Customers;</li><li>Is experienced in leading and coordinating the assigned resources;</li><li>Is knowledgeable in project administration;</li><li>Ability to create and manage detailed job schedules;</li><li>Is experienced in the procurement process;</li><li>Cross Functional competence</li><li>Solid Waste / Wastewater / Biogas / Power Generation specific competences.</li><li>Fluent in English</li></ul> For additional information on Anaergia, please visit <a href="http://www.anaergia.com/">www.anaergia.com</a>As an Equal Opportunity Employer, Anaergia provides equal employment opportunity (EEO) to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, or any other characteristic protected by federal, state or local law. In addition, Anaergia will provide reasonable accommodations for qualified individuals with disabilities.</div></div>

Industrial Project Manager (Waste/Wastewater)

<div><div>SENIOR PROJECT ENGINEER/PROJECT ENGINEER III (WASTE/INDUSTRIAL WASTEWATER SPECIALIZED) Anaergia DescriptionAnaergia is a global leader in the production of clean energy, fertilizer, and recycled water from virtually any waste stream, offering the widest range of maximizing resource recovery solutions for the municipal, industrial, commercial, and agricultural markets. Anaergia’s integrated solutions create value for its customers in the forms of renewable energy, quality fertilizers, and clean water, while dramatically reducing the cost of waste management. Anaergia delivers integrated solutions globally through established offices in North America, Europe, Africa, and Asia and its breakthrough technologies are in use at over a thousand resource recovery facilities worldwide, reducing greenhouse gas emissions while creating new revenue sources for its clients. Position MissionConsistently coordinate the assigned engineering activities to complete the project’s design in compliance with the project schedule and with the budget; observing the correctness and the completeness of the provided information. GoalsThe PE’s goals can be summarized as follow:<ul><li>Understand the scope of the work, the contract requirements, and the limit of supply;</li><li>Coordinate all the Engineering activities to complete the design of the project;</li><li>Meet / improve the project schedule;</li><li>Meet / improve the project budget intended for all engineering activities;</li><li>Meet / improve the quality standards;</li><li>Identify and submit possible “cost-effective” improvements in the design;</li><li>Quickness and flexibility in responses to urgent questions from PMs and from the sales department;</li><li>Engineering team leader at the project level for both internal and/or external resources.</li><li>Become a technical “expert” in one or more areas of Anaergia’s technical offering.</li></ul> Job DescriptionSenior Project Engineer or Project Engineer III will be the technical lead for a project and may be used to review other project documents performed by Project Engineer I and II. Additionally, a PE III may also have other managerial responsibilities within the company. <ul><li>Plan the engineering activities for all assigned projects and monitor the activities' progress in compliance with the schedule defined on the general document list;</li><li>Agree with the PM to define the budget assigned for the Project Engineering activities throughout the entire life of the project;</li><li>Regularly update the PM on the status of the design, and the remaining budget to identify possible risks in advance and plan solutions accordingly;</li><li>Provide to PMs the technical specifications and tender documents for the acquisition of the materials expected for each project in accordance with the terms of supply and properly calculated according to the design data.</li><li>Provide technical support to clients as needed under the guidance of the PM;</li><li>Provide technical review of equipment proposals, submittals and all third-party design consultants; </li><li>Check the licensing documents and incorporate permit conditions;</li><li>Coordinates regular design review meetings with the project team;</li><li>Create a risk assessment for each project to identify risks and their mitigation. Make sure to comply with the local standards required for each specific project;</li><li>Organize regular meetings (weekly) to share and update the progress of the engineering activities for all jobs; and point out any problems that emerged during the engineering development;</li><li>Support of the site manager and subcontractors/vendors regarding specific technical questions on the project design;</li><li>Organize regular meetings (bi-weekly) with the appropriate person responsible for each topic in order to submit improvements of technical aspects and building solutions. Involve the Project Engineering Leader (PEL) when necessary;</li><li>Update the Project Engineering Leader (PEL) about the status of the project, the status of the budget, and for any identified issue, which requires actions from upper-level management;</li><li>Arrange the general document list agreeing with the PM and in compliance with the contract and the external/internal resources availability;</li></ul> Senior PE or PE III is authorized to:<ul><li>Have T&amp;L costs in compliance with the function’s budget set by the PM.</li><li>Safety and Quality-Related Responsibilities</li></ul> Job RequirementsEducation<ul><li>Holds a technical diploma or graduation in: Civil Engineering / Mechanical engineering/ Chemical Engineering or equivalent</li></ul> Work Experience<ul><li>At least 10 years of progressively complex Project Engineering in the Industrial Plant business.</li></ul> Technical CompetencesUnderstanding of contract specification and identification of supply limits for the design activity of complex mechanical plants;<ul><li>Basis of Mechanical/Hydraulic design, Electrical Design, and Control systems;</li><li>Knowledge about national and international regulations for the design of waste treatment, renewable energies and biogas plants;</li><li>Experience managing relationships with all parties involved in the project design;</li><li>Fluent in English.</li></ul> Cross-Functional Competences<ul><li>Basic knowledge of “project management” and how the adopted solutions affect the project budget and schedule;</li><li>Good understanding of sales strategies, how they influence the engineering process and how the engineering process may affect sales;</li><li>Familiarity with purchasing, identifying and promoting purchasing strategies for products, contracting, and services, mainly based on:<ul><li>High volume/value (synergies/ standardized products)</li><li>Critical items (e.g. limited number of suppliers, Long Lead Items, etc..).<ul><li>Biogas specific competencies;</li><li>Waste Treatment specific competencies;</li><li>Waste Water Treatment Plant specific competences</li></ul></li></ul></li></ul> For additional information on Anaergia, please visit <a href="http://www.anaergia.com/">www.anaergia.com</a> As an Equal Opportunity Employer, Anaergia provides equal employment opportunity (EEO) to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, or any other characteristic protected by federal, state or local law. In addition, Anaergia will provide reasonable accommodations for qualified individuals with disabilities.</div></div>

Senior Project Engineer/Project Engineer III (Industrial Wastewater/Waste specialised)

<div><div>About Us:Anaergia (TSX: ANRG) is a global leader in offering sustainable solutions for the production of clean energy and the conversion of waste streams to resources. Through a proven portfolio of proprietary technological solutions, Anaergia maximizes the generation of renewable energy, diversion of waste from landfill,s and reduction of greenhouse gases for customers across the municipal, industrial, commercial, and agricultural sectors. Headquartered in Burlington, ON, and through its multiple subsidiaries across North America, Europe, Africa, and Asia, Anaergia is trusted at more than 1,600 installations globally. Job Overview:Lead and manage all the aspects of project engineering and design team activities in North America to complete the project’s designs in compliance with the project schedules and with the budgets, while controlling overall risk levels.Outcomes/GoalsThe Project Engineering Manager’s goals can be summarized as follow:<ul><li> Ensure professional standards are maintained for all designs and check work;</li><li> Lead project engineering team at project level for both internal and/or external resources.</li><li> Understand the scope of the work, the contract requirements, and the limit of supply;</li><li> Coordinate all the Project Engineering activities to complete the design of the project;</li><li> Meet/improve the project schedule; Meet / improve the project budget intended for all project engineering activities; Meet/improve the quality standards;</li><li> Identify and submit possible “cost-effective” improvements in the design;</li><li> Become a technical “expert” in one or more areas of Anaergia’s technical offering.</li><li> Provide support to Business Development and Proposals teams</li></ul> Job Responsibilities:Project Engineering Manager tasks: A Project Engineering Manager is expected to perform the tasks below with minimal guidance required and function as a technical lead on projects under limited supervision from the Director of Engineering.<ul><li> Manage, plan, schedule, and review work, as appropriate to deliver engineering function-specific outputs and defined milestones to business stakeholders.</li><li> Plan the project engineering activities for all assigned projects and monitor the activities' progress in compliance with the schedule defined on the general document list;</li><li> Arrange the general document list agreeing with the Director of PE and in compliance with the contract and the external/internal resources availability;</li><li> Manage multiple concurrent multi-disciplinary projects with regular review, prioritizing and reporting to all stakeholders, resulting in on-time and on-budget completion.</li><li> Agree with the Director of PE to define the budget assigned for the Project Engineering activities through the entire life of the project;</li><li> Participation in the setting of department budget and managing to budget with monthly/quarterly &amp; annual reviews</li><li> Regularly update the Director of PE on the status of the design, and the remaining budget to identify possible risk in advance and plan solutions accordingly;</li><li> Provide to PMs the technical specifications and tender documents for the acquisition of the materials expected for each project in accordance with the terms of supply and properly calculated according to the design data.</li><li> Provide technical support to clients as needed under the guidance of the Director of PE;</li><li> Provide technical review of all third-party design consultants;</li><li> Provide technical review of equipment proposals and submittals;</li><li> Check all the licensing documents and incorporate permit conditions;</li><li> Coordinates regular design review meetings with project team;</li><li> Ensure that quality and reliability are at the forefront of everything the team delivers.</li><li> Create a risk assessment for each project to identify risks and their mitigation. Make sure to comply with the local standards required for each specific project;</li><li> Organize regular meetings (weekly) to share and update the progress for the engineering activities for all jobs; and point out any problems emerge during the engineering development;</li><li> Organize regular meetings (bi-weekly) with the appropriate person responsible for each topic in order to submit improvements of technical aspects and building solutions. Involve the Project Engineering Leader (PEL) when necessary;</li></ul>Project Engineering Manager is authorized to:<ul><li> Have T&amp;L costs in compliance with the function’s budget set by the Director of Engineering.</li></ul> Safety and Quality related responsibilities<ul><li> The Project Engineering Manager is responsible for the rigorous application of the company rules and standards about the engineering activities, for the accuracy of the information provided, and for the compliance with the contract requirements and specifications of each project.</li><li> Compliance to safety is a priority one for Anaergia.</li><li> During the entire design activity, the Project Engineering Manager shall assess all aspects related to health risks and safety through all phases of the project (design, construction, operation, maintenance, and dismantling) and take actions to eliminate, mitigate, and advise all involved figures about the remaining risk.</li></ul> Job Requirements:Education<ul><li> Holds a technical diploma or graduation in: Civil Engineering / Mechanical engineering/ Chemical Engineering or equivalent</li></ul>Experience<ul><li> Matured experience of 15+ years in Project Engineering, Design Engineering, and/or project management in the Industrial Plant business. Prefer experience in anaerobic digestion, biogas, WWTP, and/or solid waste.</li><li> Expert understanding of all MS Office tools and ability to adapt to new digital tools</li><li> Experienced in the Design of plants and process engineering</li></ul>Technical CompetenciesThe Project Engineering Manager has the following technical skillsets:<ul><li> Understanding of contract specification and identification of supply limits for the design activity of complex mechanical plants;</li><li> Basis of Mechanical/Hydraulic design, Electrical Design and Control systems;</li><li> Knowledge about national and international regulations for the design of waste treatment, renewable energies, and biogas plants;</li><li> Experience managing relationships with all parties involved in the project design;</li><li> Fluent in English.</li></ul>Cross-Functional CompetenciesTo execute the job with the “right sense of priority”, the Project Engineering Manager shall understand how their activity affects other functions as well as other functions can influence either positively or negatively, the achievement of the Project execution goals. Competencies include:<ul><li>Basic knowledge of “project management” and how the adopted solutions affect the project budget and schedule;</li><li>Good understanding of sales strategies, how they influence the engineering process, and how the engineering process may affect sales;</li><li>Familiarity with purchasing, identify, and promote purchasing strategies for products, contracting, and services, mainly based on:<ul><li>High volume/value (synergies/ standardized products)</li><li>Critical items (e.g. limited number of suppliers, Long Lead Items, etc..).</li></ul></li></ul><ul><li> Biogas specific competencies;</li><li> Waste Treatment specific competences;</li><li> Waste Water Treatment Plant specific competences</li></ul>Hierarchy<ul><li> The Project Engineering Manager reports to the Director of Engineering.</li></ul>In other words, on specific projects, the Project Engineering Manager responds to the Director for:<ul><li> Delivering consistently assigned tasks (in quality &amp; quantity)</li><li> Meeting budget</li><li> Meeting time frame</li></ul>For additional information on Anaergia, please visit <a href="http://www.anaergia.com">www.anaergia.com</a>As an Equal Opportunity Employer, Anaergia provides equal employment opportunity (EEO) to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, or any other characteristic protected by federal, state or local law. In addition, Anaergia will provide reasonable accommodations for qualified individuals with disabilities. </div></div>

NEW - Project Engineering Manager

<h2>Scope of Position</h2>EDF Renewables North America is a market-leading independent power producer and service provider with over 35 years of experience. We deliver grid-scale power: wind (onshore and offshore), solar photovoltaic, and storage projects; distribution-scale power: solar and storage; asset optimization: technical, operational, and commercial expertise to maximize the performance of generating projects, and onsite solutions, through the Company’s PowerFlex affiliate, offering a full suite of onsite energy solutions for commercial and industrial customers: solar, storage, EV charging, energy management systems, and microgrids. From the company's state-of-the-art control center, Operators monitor conditions within the renewable energy plants managed in the OCC. Key function is to mitigate equipment downtime and production losses through responsive, timely actions to maximize plant performance. Control Center Operators remotely monitor and control turbine, inverter, and BOP plant equipment from the control room using Supervisory Control and Data Acquisition (SCADA) computer systems to maintain safe, efficient, and continuous plant operation.<h2>Responsibilities</h2><ul> <li> <ul> <li>Complete applicable safety program training requirements per the IIPP annually. Read, understand, and apply information such as safety rules, operating and maintenance instructions, and procedure manuals</li> <li>Maintain safe, reliable, and efficient operation including maximizing generation and operate facility within all applicable permits</li> <li>Respond to changing conditions with regard to maximizing plant safety and efficiency</li> <li>Visually monitor and read parameters, data points, and sensor outputs at specified intervals to verify operating conditions and to detect faults and malfunctions</li> <li>Monitor data such as weather conditions including wind speed, direction, turbulence, irradiance, storms, or equipment temperatures, voltage, current, power, and VAR’s</li> <li>Adjust manual controls or verify automatic controls to bring equipment into recommended or prescribed operating ranges, based on utility/ISO/customer requirements. Accurately change control equipment setpoints</li> <li>Record operation actions taken during shift in operator's logbook or other automated logging mechanisms</li> <li>Anticipate typical problems, identify potential or recurring problems, discover opportunities for improvements, and take appropriate action</li> <li>Able to become proficient in operating computers, the OCC’s Integrated SCADA system, and all other plant SCADA systems used in monitoring and controlling plant operations</li> <li>Use weather information from weather services and interconnected companies to respond to load demand changes as directed through curtailment orders and outage directives</li> <li>Ensure compliance to all regulatory and contractual requirements through adherence to all operational procedures, processes, and policies</li> <li>Coordinate with regional personnel and system operators from other companies on matters pertaining to customer problems or demands. Utilize accurate and efficient three-way communication skills on inbound and outbound telephone conversations</li> <li>Advanced staff works with maintenance to troubleshoot problems and ascertains probable cause</li> <li>All other duties as assigned</li> </ul> Working conditions:Control Center Operators spend 100% of their time in the OCC facility, excluding safety and scheduled training exercises. Shift assignments in the 24/7/365 work setting include extended workdays and the ability to work other shifts as required, to include overtime, rotating shifts, holidays and weekends as necessary.</li></ul><h2>Qualifications</h2><ul> <li>Able to maintain confidentiality, be detail oriented and disciplined, and adept at multi-tasking.</li> <li>Able to demonstrate good work habits including, but not limited to, excellent attendance patterns and being to work on time.</li> <li>Conduct and present himself/herself in a professional manner.</li> <li>Excellent interpersonal communication skills, both verbal and written, with demonstrated ability to follow instructions diligently.</li> <li>Demonstrated good analytical skills to process information in a timely and accurate manner. Math skills sufficient to accurately complete required job functions.</li> <li>Demonstrated computer skills required with ability to learn and use MS Office suite programs, unique plant SCADA systems, and network/communication systems to identify plant interconnectivity issues.</li> <li>Understanding of the operation and control of power plants highly desired. Knowledge of NERC operating policies a plus. Ability to train for and become NERC certified is a desired advancement path for operators.</li> <li>A minimum of 2-5+ years of applicable work using computers or similar industrial equipment, experience in power plant operations considered a plus. Military or maritime background is an asset.</li> <li>A minimum of 2-4 years of education with a degree from an accredited engineering or technical school preferred.</li> <li>Must be able to work other shifts as required, including overtime, rotating shifts, holidays and weekends as necessary. Experience in 24/7 work settings preferred.</li></ul>This role’s range is between $27.00 - $44.00 Hourly. In addition, EDF Renewables offers best-in-class employment incentives, including.<ul> <li>Competitive Bonus incentives: This position is eligible for our annual bonus program</li> <li>Comprehensive Health Benefits: EDF Renewables USA pays 100% of premiums for employee health benefits &amp; provides low-cost coverage for eligible dependents</li> <li>Rewarding 401k Package: EDF Renewables provides a generous contribution with immediate vesting</li></ul>We are also proud to offer:<ul> <li>Favorable time off programs, including paid parental leave</li> <li>Rewarding Learning &amp; Development Opportunities</li> <li>Personalized Financial 1:1 Coaching Workshops</li> <li>Supportive Mentorship &amp; Buddy Programs</li></ul>Be a part of an innovative and collaborative team environment that fosters our goal of Delivering renewable solutions to lead the transition to a sustainable energy future.

Delivering competitive low-carbon energy solutions that combine economic growth with climate protection on a global scale.

Control Center Operator I [On-site]

<h2>What The Role Is</h2>The Control Systems Commissioning Engineer is a highly valued member of Clearway’s SCADA &amp; Control Engineering team.  This individual will leverage their technical expertise to lead commissioning efforts for Clearway’s utility scale solar and wind power generation plants.  While the primary focus of this role is commissioning, this individual is expected to provide supplemental support for other aspects within the team, including operational troubleshooting, controls performance optimization, and compliance testing.  This position requires the ability to work a flex schedule to support emergencies or commissioning tests.  This position includes up to 25% travel to US based office and plant locations.<h2>What You'll Be Doing</h2><ul><li>Lead the design, performance, and execution of plant controls, post FAT and through the commissioning phases of new assets and acquisitions.</li><li>Provide guidance for EPC SCADA Integrator by pulling requirements, responding to RFIs and collaborating on control algorithm development.</li><li>Coordinate and perform site acceptance testing, including ISO required testing, in accordance with regulatory body standards and customer requirements, documenting results.</li><li>Review EPC design elements related to SCADA &amp; Controls equipment and software algorithms, addressing any shortcomings prior to O&amp;M turnover.</li><li>Conduct training on new plant controls system specifics, HMI interfaces, system architecture and expected trouble points as part of turn over to the O&amp;M team.</li><li>Baseline and improve performance of renewable plant control algorithms through the use of data analytics and simulation modeling tools.</li><li>Perform NERC and/or ISO compliance testing in accordance with regulatory body standards on operational sites on an as needed basis.</li><li>Pursue continuous improvement by keeping abreast of industry standards and implementing innovative new designs to enhance plant reliability and performance.</li><li>Support Clearway’s cybersecurity strategy, ensuring defense in depth mechanisms are implemented on SCADA &amp; Controls equipment as specified.</li></ul><h2>What You'll Bring</h2><ul><li>Bachelor’s degree in Electrical Engineering or related degree from an ABET accredited program required.</li><li>Minimum 4 years experience within an Engineering discipline</li><li>Minimum 1 year experience within Control Systems Engineering</li><li>Competent knowledge of power plant control systems architecture and software</li><li>Working knowledge and prior programming of SEL RTAC or comparable plant control devices such as PLCs</li><li>Ability to interpret NERC, ERCOT, WECC, CAISO &amp; ISONE regulations</li><li>Knowledge of industry standards and trends</li><li>Familiarity with Software change management best practices</li><li>Strong Verbal and written communication skills</li><li>Highly data driven and analytical</li><li>Competent knowledge in Engineering Principles and Processes</li><li>High proficiency in MS Excel, MS Word &amp; Outlook</li><li>Project management skills</li><li>Customer focus driven</li></ul><h2>What Would Be Nice</h2><ul><li>Direct experience with Grid Tied Power Generation controls not required but highly valued</li><li>Renewable Energy plant controls experience not required but highly valued</li><li>Working knowledge of control system requirements for electrical generation management</li><li>Experience programming in IEC 61131-3 Logic Engine, specifically Structured Text</li><li>Experience with OPC, Modbus, SEL, EtherNet/IP and DNP3 protocols</li><li>Understanding of network security protocols and cyber security standards</li><li>Experience with integration of Energy Storage Systems with Renewable Plants</li><li>Experience with programming substation relays (GE, SEL, etc.)</li><li>Knowledge of IT networks and telecommunications infrastructure</li><li>Ability to Teach, Train &amp; Mentor</li></ul>Clearway will not sponsor nonimmigrant visas for this position (H-1B, TN, E-3, etc.). <div><div><div>The pay rate for the successful candidate will depend on geographic location, skills, relevant and demonstrated experience, education, training and certifications, and other factors permitted by law. This role is eligible to earn an annual cash bonus, subject to personal and company performance goals.</div><div>Salary Range Across all U.S. Locations</div><div>$115,000—$140,000 USD</div></div></div><div>Clearway Energy Group is leading the transition to a world powered by clean energy. Along with our public affiliate Clearway Energy, Inc., we own and operate 10 gigawatts of renewable and conventional energy assets across the country. As we develop a nationwide pipeline of new renewable energy projects for the future, Clearway’s 8 gigawatts of operating wind, solar, and energy storage assets offset the equivalent of more than 9 million metric tons of carbon emissions for our customers today. Clearway Energy Group is headquartered in San Francisco with offices in Carlsbad, CA.; Scottsdale, AZ.; Houston, TX; Denver, CO; and Princeton, NJ. For more information, visit clearwayenergygroup.com.Our Commitment to Diversity, Equity, &amp; Inclusion At Clearway, we create a community that isn’t about being the same – it’s about building a team of unique individuals, with different backgrounds &amp; skill sets, coming together to build something big &amp; make a difference in the world. Clearway’s team is dedicated to a clean energy future across a wide spectrum of roles &amp; responsibilities. Embodying our company values and operating principles, unique individuals come together over a common mission. We embrace opportunities to do challenging work that can change the world. We aspire to bring out the best in everyone. We share setbacks, celebrate successes, &amp; act with integrity &amp; accountability to get the job done. Working at Clearway, Hybrid Together Here at Clearway, we’re committed to balancing flexibility while fostering strong relationships with our teammates. We do this by prioritizing new hires based near one of our offices in San Francisco, Carlsbad, Scottsdale, Houston, Denver, &amp; Princeton. Our office-based employees typically work together from fabulous spaces on Tuesdays &amp; Thursdays to collaborate &amp; learn, build community, get to know one another, &amp; enjoy company-provided meals &amp; events. Clearway Energy is an equal opportunity employer that values a broad diversity of talent, knowledge, experience &amp; expertise. We intentionally foster a culture of inclusion that empowers our employees to deliver superior performance to the communities we serve. We encourage minorities, women, individuals with disabilities &amp; protected veterans to join the team. Clearway is a proud promoter of employment opportunities to our Military &amp; Veterans. What We Provide Clearway offers all eligible employees working 20+ hours per week a comprehensive menu of benefits: generous PTO, medical, dental &amp; vision care, HSAs with company contributions, health FSAs, dependent daycare FSAs, commuter benefits, relocation, &amp; a 401(k) plan with employer match, a variety of life &amp; accident insurances, fertility programs, adoption assistance, generous parental leave, tuition reimbursement, &amp; benefits for employees in same-sex marriages, civil unions &amp; domestic partnerships. For more on Clearway benefits, visit our <a href="https://benefitsatclearway.com/">Benefits Website</a>.Notice to Applicants Clearway Energy is strongly committed to a philosophy of equal opportunity and fully complies with <a href="https://www.dol.gov/sites/dolgov/files/ofccp/regs/compliance/posters/pdf/eeopost.pdf">equal employment laws</a>, ordinances and regulations for all applicants and employees. We will make reasonable accommodations to enable individuals with disabilities to apply and compete for employment opportunities for which they are qualified. If you need a reasonable accommodation because of a disability for any part of the employment process, please send an e-mail to <a href="mailto:recruiting@clearwayenergy.com">recruiting@clearwayenergy.com</a> and let us know the nature of your request and your contact information.<a href="https://www.clearwayenergygroup.com/california-consumer-protection-act-applicant-notice/">Notice to California Applicants</a> Clearway Energy is strongly committed to a philosophy of equal opportunity and fully complies with <a href="https://www.dol.gov/sites/dolgov/files/ofccp/regs/compliance/posters/pdf/eeopost.pdf">equal employment laws</a>, ordinances and regulations for all applicants and employees.</div>

Explore jobs

Get Hired

Discover climate organizations

Join our Fellowship

Post a job

Speak at our Fellowship

Become a Climatebase member

PLATFORMS

MEMBERS

WHO WE ARE