<div>This is your chance to join the rapidly growing commercial solar energy business.</div><div>FlexRack is an integrated solar company that offers custom-designed, fixed tilt ground mount and single-axis solar tracking systems in the commercial and utility-scale solar mounting industries. FlexRack also offers full services, including engineering, geotechnical, pullout testing, field, and layout design services to address the actual site conditions of a project site. FlexRack has completed over 3.5 GW of solar racking installations in over 40 U.S. states, 9 Canadian provinces and across the globe.</div><div> </div> <h3>ESSENTIAL JOB FUNCTION &amp; RESPONSIBILITIES</h3><ul><li>Set-up, operate and adjust parameters of welded tube mill equipment and tooling to maximize efficiency and quality requirements. </li><li>Make adjustments to driven stand rolls, side pass rolls, and weld rolls in accordance with Mill Tooling Setup Charts to set mill up properly for given sizes. </li><li>Install the proper bearing spacers, work coil and impeder rod required during changeovers. </li><li>Make adjustments to sizing section driven stand rolls and side pass rolls to properly size tubing. </li><li>Perform dimensional and visual inspections of product to ensure quality of product. </li><li>Operate end welding machine and hand-held torch. </li><li>Verify correct raw materials are utilized. </li><li>Use and read precision measuring equipment (e.g., micrometers, Vernier calipers, tape measures). </li><li>Visually inspect tubing for quality defects and reject non-confirming product. </li><li>Complete daily inspection reports. </li><li>Execute and record all production/quality checks. </li><li>Ensure safe operating conditions. </li><li>Perform routine and preventative maintenance as needed on equipment. </li><li>Ensure cleanliness and regular maintenance of equipment. </li><li>Report identified non-conformities to the production supervisor. </li><li>Generate production tags. </li><li>Provide training and support to other mill crew personnel. </li><li>Work overtime as needed to support customer requirements. </li><li>Work well with coworkers and foster a team environment. </li><li>Perform other duties and assignments as assigned by management.         </li></ul><h3>Experience Requirements:</h3><ul><li>5 + years of Experience in Structural Steel Roll Forming Manufacturing. </li><li>2 + years of Experience with identifying and applying LEAN principles.</li></ul><h3>Requirements and Skills</h3><ul><li>Ability to work in a safe manner </li><li>Ability to recognize quality of material </li><li>Demonstrated ability to perform Lock Out/Tag Out </li><li>Demonstrated ability to follow specific instructions and directions </li><li>Demonstrated ability to use and operate hand tools </li><li>Demonstrated ability to stack material properly </li><li>Ability to pay attention to surroundings </li><li>Ability to identify safety issues in the work area and identify equipment malfunctions </li><li>Ability to read a tape measure and read blueprints or plans </li><li>Ability to troubleshoot the machine or equipment in use. </li><li>Ability to understand efficiencies and productivity measures </li><li>Ability to work under immediate supervision </li><li>Ability to work hours mandated by management  </li></ul><h3>PHYSICAL DEMANDS</h3><ul><li>Stationary Position: frequently remains stationary up to 90% of the time and sitting up to 8 hours in a day</li><li>Move/Traverse: infrequently bend, stand, stoop and/or walk</li><li>Carry Weight: infrequently carry weight and/or lift objects (light to heavy) weighing up to 10 pounds</li><li>Hearing and Speech: frequently communicates with the ability to hear and talk on a regular basis with employees, coworkers, and all personnel matters; must be able to exchange accurate information in these situations</li><li>Sight: frequent use of sight to detect images on computer, office documents, and office objects near and far</li><li>Climb: occasionally ascends/descends on stairway to get to office upper and lower floors</li><li>Travel: up to 5% as needed</li></ul><h3>WORK ENVIRONMENT</h3><ul><li>Regular professional, office business setting</li><li>Noise level ranges from low to moderate (if in office setting)</li><li>Noise level ranges from moderate to high (if on construction worksite)</li></ul> <div>FLEXRACK by Qcells is proud to be an at-will Equal Opportunity Employer and prohibits discrimination against race, color, religion, sex, sexual orientation, gender perception or identity, national origin, age, marital status, pregnancy, citizenship, disability, protected veteran status and any other classification protected by applicable federal, state or local law.  This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.  </div><div> </div><div>We are committed to the full inclusion of all qualified individuals.  As part of this commitment, FLEXRACK by Qcells will provide reasonable accommodations to all qualified individuals with disabilities to participate in the job application or interview process, to perform essential job functions, and/or to receive other benefits and privileges of employment.  Please contact us to request accommodations hj.cho@qcells.com.  </div><div> </div><div>Nothing in this statement shall imply implicitly or explicitly a guarantee of employment outside our at-will employment opportunity.</div>

Leading the way with our complete energy solutions for a sustainable future.

Tube Mill Lead Operator

<div>This is your chance to join the rapidly growing commercial solar energy business.</div><div>FlexRack is an integrated solar company that offers custom-designed, fixed tilt ground mount and single-axis solar tracking systems in the commercial and utility-scale solar mounting industries. FlexRack also offers full services, including engineering, geotechnical, pullout testing, field, and layout design services to address the actual site conditions of a project site. FlexRack has completed over 3.5 GW of solar racking installations in over 40 U.S. states, 9 Canadian provinces and across the globe.</div> <h3>ESSENTIAL JOB FUNCTION &amp; RESPONSIBILITIES</h3><ul><li>Makes repairs, modifications, installations, testing, and calibration of assemblies and systems on the manufacturing floor.</li><li>Installs, inspects, troubleshoots, and improves the efficiency of production machines.</li><li>Discusses malfunctions and machine operation variations with operators, supervisors, and other maintenance team members to diagnose problems and repair machines.</li><li>Participates in electrical, mechanical, and instrumentation trouble shooting.</li><li>Dismantles defective machines and equipment, examines defective parts to detect imperfections and install new or repaired parts.</li><li>Trouble shoots and repairs bearings, seals, hydraulics, pneumatics, and clutches.</li><li>Performs preventative maintenance and calibration using applicable SOP and work instructions.</li><li>Works in a safe manner and proactively addresses safety issues.</li><li>Demonstrates ability to operate machines, hand-tools and electrical equipment.</li><li>Possesses an operational knowledge of automated industrial machinery, and hydraulic and pneumatic systems.</li><li>Demonstrates ability to read and interpret mechanical drawings.</li><li>Demonstrates strong problem-solving skills with practical, mechanical, and electrical aptitude.</li><li>Possesses basic troubleshooting experience and proven skills in machine repair, gear boxes, and a variety of pumps</li><li>Demonstrates strong written and oral communication skills.</li><li>Demonstrates the ability to follow directions and work well in a team.</li><li>Welding, machining and fabrication experience a plus.</li></ul><h3>Experience Requirements</h3><ul><li>5+ years of Millwright / Maintenance Tech experience needed.</li><li> Millwright Journeyman’s card (preferred)</li></ul><h3>Requirements and Skills </h3><ul><li>Duties encompass preventative maintenance, installations, troubleshooting, modifications of manufacturing equipment. Completion of preventative maintenance work orders as per the PM schedule, complete and document information on the PM outlining completion or additional work and materials required to complete the PM. Comply with allcompany safety policies and procedures and ensure all equipment is properly guarded and operating in a safe manner. Participate in department team meetings to review and resolve quality, service, operations, facility, human resources and health and safety issues. Maximize equipment uptime, minimize equipment breakdowns. Effective feedback on equipment after or during PM or breakdowns. Proper spare part or replacement material ordering.</li></ul><h3>PHYSICAL DEMANDS</h3><ul><li>Stationary Position: frequently remains stationary up to 90% of the time and sitting up to 8 hours in a day</li><li>Move/Traverse: infrequently bend, stand, stoop and/or walk</li><li>Carry Weight: infrequently carry weight and/or lift objects (light to heavy) weighing up to 10 pounds</li><li>Hearing and Speech: frequently communicates with the ability to hear and talk on a regular basis with employees, coworkers, and all personnel matters; must be able to exchange accurate information in these situations</li><li>Sight: frequent use of sight to detect images on computer, office documents, and office objects near and far</li><li>Climb: occasionally ascends/descends on stairway to get to office upper and lower floors</li><li>Travel: up to 5 % as needed</li></ul><h3>WORK ENVIRONMENT</h3><ul><li>Regular professional, office business setting</li><li>Noise level ranges from low to moderate (if in office setting)</li><li>Noise level ranges from moderate to high (if on construction worksite)</li></ul> <div>FLEXRACK by Qcells is proud to be an at-will Equal Opportunity Employer and prohibits discrimination against race, color, religion, sex, sexual orientation, gender perception or identity, national origin, age, marital status, pregnancy, citizenship, disability, protected veteran status and any other classification protected by applicable federal, state or local law.  This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.  </div><div> </div><div>We are committed to the full inclusion of all qualified individuals.  As part of this commitment, FLEXRACK by Qcells will provide reasonable accommodations to all qualified individuals with disabilities to participate in the job application or interview process, to perform essential job functions, and/or to receive other benefits and privileges of employment.  Please contact us to request accommodations hj.cho@qcells.com.  </div><div> </div><div>Nothing in this statement shall imply implicitly or explicitly a guarantee of employment outside our at-will employment opportunity.</div>

Tube Mill Maintenance Technician (Millwright)

At Trane Technologies TM and through our businesses including Trane ® and Thermo King ® , we create innovative climate solutions for buildings, homes, and transportation that challenge what’s possible for a sustainable world. We're a team that dares to look at the world's challenges and see impactful possibilities. We believe in a better future when we uplift others and enable our people to thrive at work and at home. We boldly go.Are you a skilled HVAC Service Technician that wants a rewarding career from a worldwide HVAC leader? Experience industry leading pay and top-notch benefits with a cutting-edge HVAC manufacturer that provides stability and career growth!Trane is seeking a Commercial HVAC Service Technician in the Valley View, OH area.In this role, you will leverage your HVAC skills to troubleshoot, diagnose and service a variety of commercial and industrial HVAC equipment.If you have 3+ years of experience working with commercial HVAC equipment , Trane wants to hear from you!Why Trane Technologies Is The Best Company for HVAC Field Technicians:· Competitive Pay: Highly competitive and comprehensive total compensation program. Overtime opportunities are available.· Full Benefits : Including medical, dental, vision, 401k with up to 6% matching, core company contribution, 9 paid holidays, 15 days of vacation time, life insurance, and more!· Valuable Training: featuring Manufacturer (OEM) Level Training; formal internal training programs for those looking to add to their industry knowledge, as well as continued learning for those want to sharpen their HVAC skills· Career Advancement: opportunities for career development and promotions as well as a tuition reimbursement program· Perks: Newer model company vehicle, high speed laptop, smartphone, specialized tools, uniforms, PPE and safety boot allowance· Independent Work Days: At Trane, we trust you to get the job done right. Most days, you’ll be dispatched from your house and can enjoy working independently in the field!· Factory support – Because you are working with Trane, you will enjoy having access to the factory and getting the job done right the first time! Plus, you have access to Tech Hub, a nationwide support platform to connect you with others to get you the support you need.Work arrangement: Remote within geography. You will be dispatched from your house to different locations in and around the Valley View, OH area to perform your work.What you’ll be doing:As a Commercial Service Technician, you will be dispatched from your house to different locations in and around the Valley View, OH area to perform scheduled (and unscheduled) preventative maintenance, inspections, site surveys, and service requests for a variety of commercial and industrial equipment.You’ll enjoy a variety in your daily duties which could include:· Start-up and commissioning of our Trane controls and HVAC equipment· Troubleshooting, diagnosing and repairing commercial HVAC equipment such as split systems, package units, and chillers and/or ancillary supporting components such as pumps, cooling towers, etc.· Troubleshooting and repairing building control systems; optimizing controls and equipment for better usage by owner· Performing replacements and modifications of HVAC equipment or systems as needed or requestedWhat you'll bring to the table:<ul><li>A High School Diploma, GED or equivalent experience</li><li>3+ years of experience servicing, troubleshooting and maintaining commercial HVAC equipment</li><li>Operating knowledge of Microsoft office and comfortable with hand-held devices (i.e. Smartphone, iPad)</li><li>A valid driver’s license, with no major or frequent traffic violations</li><li>EPA Certification Preferred</li><li>Ability to work on-call rotation and/or overtime to support the business, including occasional overnight stays</li></ul>Compensation: $21.78 - $40.05 per hourAdditional Compensation: Sign-on bonus availableDisclaimer: This "range" could be a result of seniority, merit, geographic location where the work is performed, education, experience, travel requirements for the job, or because of a system the employer uses to measure earnings by quantity or quality of production (so, for example, positions that may not have traditional salary ranges).Additional Requirements and Environmental Exposure :· Must be able to safely and legally operate a vehicle using a seat belt· Must be able to wear helmets, safety goggles, fall protection harness and safety boots to safely perform job duties· Must be able to twist the trunk of your body 90 degrees in each direction· Must be able to squat and touch the floor with both hands· Must be able to reach your hands over your head· Must be able to stand on concrete surfaces for extended periods, routinely up to 4 hours· This position is highly physical and requires regular use of hands, fingers, walking, stooping, kneeling and climbing ladders. It requires employees to regularly lift and or move up to 10 lbs., frequently lift and/or move up to 40 lbs. and occasionally lift and/or move more than 40 lbs.· Must be able to safely use a ladder with a 350 lb. total weight limit, while carrying equipment of 50 lbs. or less· Must be able to maneuver confined access areas, as small as 30” vertical x 45” horizontal· Must be able to comfortably and routinely access rooftops with extension and/or fixed ladders at heights of 15’ to 20’, and occasionally, up to 50 feet · This role may be exposed to variable weather conditions, moving mechanical parts, heights, risk of electrical shock, noisy operating equipment and other variable environmental conditions based on locationWe offer competitive compensation and comprehensive benefits and programs. We are an equal opportunity employer; all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, pregnancy, age, marital status, disability, status as a protected veteran, or any legally protected status.

HVAC Technician - Valley View, OH

At Trane Technologies TM and through our businesses including Trane ® and Thermo King ® , we create innovative climate solutions for buildings, homes, and transportation that challenge what’s possible for a sustainable world. We're a team that dares to look at the world's challenges and see impactful possibilities. We believe in a better future when we uplift others and enable our people to thrive at work and at home. We boldly go.Why Trane Technologies Is The Best Company for Controls Technicians:<ul><li>Trane is recognized worldwide as the brand standard for HVAC and Building Controls Systems</li><li>Trane is committed to your safety and has a world class safety program with continuous training for their associates</li><li>Highly competitive and comprehensive total compensation program including total cash compensation, benefits, holiday and vacation</li><li>Dedicated to a military friendly environment (Veterans are highly encouraged to apply)</li><li>Unlimited opportunities for career development and promotions</li><li>Determined focus to be the employer of choice in our industry (we want to be the company where everyone wants to work)</li><li>World Class continuing education, featuring Manufacturer (OEM) Level Training</li><li>Company-wide commitment to promoting a strong work/life balance</li><li>Organizational encouragement of community involvement and sustainability (green initiatives)</li><li>Late model, clean, and dependable company vehicle, high speed laptop, uniforms, and smart phone</li></ul>Job Summary:<ul><li>Responsible for commissioning, programming, setting up graphics, communications link, end to end testing, troubleshooting and servicing on assigned projects.</li><li>Responsible for documenting point to point verification, sequence of operations validation and job close out requirements.</li><li>Represents the company by serving as the direct customer contact and is responsible for servicing products and equipment on assigned projects, ensuring customer satisfaction by identifying, diagnosing and repairing equipment and systems at customer’s location.</li><li>Coordinates with team leader and customer to precisely understand requirements for all on-site installation and repairs by forecasting issues, gathering materials and synchronizing on-site work.</li><li>Keeps current on Trane products concerning installation, operation, maintenance, service, and repair of direct digital control systems.</li><li>Continually enforces safety to the highest standards and maintains security and accountability of company issued and procured assets by recording use, wear and conditions.</li><li>Displays team effort and dedication to customer by maintaining flexibility to work overtime and weeks as the business requires, including occasional overnight stays.</li></ul>Qualifications:<ul><li>A High School Diploma or equivalent required, and typically at least 3-5 years of experience in HVAC/Controls. Technical School or formal training is preferred.</li><li>Operating knowledge of Microsoft office software and working proficiency with hand held computer (i.e. Smartphone, iPad).</li><li>Must possess a valid driver’s license for a minimum of 12 months, with no major or frequent traffic violations including, but not limited to:</li><li>DUI, Hit &amp; Run, License Suspension, Reckless / Careless Driving or multiple smaller infractions or preventable collisions in the previous 3 years.</li><li>Previous experience with DDC controls system preferred.</li></ul>Additional Requirements and Environmental Exposure:<ul><li>Must be able to safely and legally operate a vehicle using a seat belt</li><li>Must be able to wear helmets, safety goggles, fall protection harness and safety boots to safely perform job duties</li><li>Must be able to twist the trunk of your body 90 degrees in each direction</li><li>Must be able to squat and touch the floor with both hands</li><li>Must be able to reach your hands over your head</li><li>Must be able to stand on concrete surfaces for extended periods, routinely up to 4 hours</li><li>This position is highly physical and requires regular use of hands, fingers, walking, stooping, kneeling and climbing ladders. It requires employees to regularly lift and or move up to 10 lbs. and frequently lift and/or move up to 40 lbs. (may occasionally lift and/or move more than 40 lbs. with special approval.)</li><li>Must be able to safely use a ladder with a 375 lb. total weight limit, while wearing equipment weighing up to 50 lbs.</li><li>Must be able to maneuver access areas, as small as 30” vertical x 45” horizontal</li><li>Must be able to comfortably and routinely access rooftops with extension and/or fixed ladders at heights of 15’ to 20’, and occasionally, up to 50 feet + This role may be exposed to variable weather conditions, moving mechanical parts, heights, risk of electrical shock, noisy operating equipment and other variable environmental conditions based on location</li></ul>Compensation: $22.36 – $41.11 per hourDisclaimer: This "range" could be a result of seniority, merit, geographic location where the work is performed, education, experience, travel requirements for the job, or because of a system the employer uses to measure earnings by quantity or quality of production (so, for example, positions that may not have traditional salary ranges).We offer competitive compensation and comprehensive benefits and programs. We are an equal opportunity employer; all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, pregnancy, age, marital status, disability, status as a protected veteran, or any legally protected status.

Controls Technician - Valley View, OH

At Trane Technologies TM and through our businesses including Trane ® and Thermo King ® , we create innovative climate solutions for buildings, homes, and transportation that challenge what’s possible for a sustainable world. We're a team that dares to look at the world's challenges and see impactful possibilities. We believe in a better future when we uplift others and enable our people to thrive at work and at home. We boldly go.Are you dreaming about a career that offers excellent pay, great benefits, job security and variety in your daily work? Look no further than a career with Trane Technologies, a worldwide leader in HVAC and Building Automation.Trane Technologies is currently seeking a Commercial HVAC Apprentice .As a HVAC Technician Apprentice, you will be primarily responsible for assisting seasoned Service Technicians in the installation and repair of environmental control systems, utilizing knowledge of refrigeration theory, control systems, pipe fitting, and structural layouts. Trane Technologies affords you the opportunity to work directly for a leading manufacturer giving you access to technical support, training on newest technology and comprehensive career paths with opportunity for growth.Work arrangement: Remote within geography. You will be dispatched from your house to different locations in and around the Valley View, OH area to perform your work.Why Trane is the best company for Apprentices:<ul><li>Competitive Pay: Highly competitive and comprehensive total compensation program. Overtime opportunities are available</li><li>Full Benefits : Medical, dental, vision, 401k with up to 6% matching, core company contribution of 2%, 9 paid holidays, 3 floating holidays, 15 days of vacation time, and more!</li></ul>· Career Advancement: opportunities for career development and promotions as well as a tuition coverage for industry certifications and education· Mentors – You’ll shadow or be paired with committed mentors who will provide you with the support you need to learn and grow your HVAC knowledge and abilities· Perks: Newer company vehicle, gas card, high speed laptop, smartphone, tools provided, uniforms, PPE and safety boot allowanceWhat you’ll be doing:· Ensure customer satisfaction by servicing products, equipment, and systems at customer’s locations to include: identifying, examining, diagnosing, and planning for equipment repair.· Work with supervising field technician, project manager and customers to precisely understand requirements for all on-site installations such as: forecasting issues, gathering materials and synchronizing on-site work.· Use cutting edge software and technology, a variety of hand-tools, and blueprints / engineering specifications to diagnose and repair units.· Continually enforce safety to the highest standards and maintains security and accountability of company issued and procured assets.You will have the opportunity for consideration for our unique, highly sought after Trane Commercial HVAC Technician Apprenticeship Program (TAP). This is a robust, four-year apprenticeship program (https://careers.tranetechnologies.com/global/en/commercial-hvac-technician-apprenticeship-program) Nationally Registered through the US department of Labor for aspiring technicians in the United States that includes paid instruction time and on-the-job training.When a part of the program, program participants are paired with dedicated mentors who help participants learn everything they need to know about the HVAC industry. As participants advance through the program, they will receive regular pay increases, and upon successful completion, they’ll be awarded with a nationally recognized industry credential and be promoted to a HVAC Service Technician.What you bring to the table:<ul><li>No Industry Experience Required.</li></ul>o Technical school certificates and/or formal HVAC training/experience is not required but will be considered when determining proficiency level for the program and starting compensation<ul><li>Must be at least 18 years of age when you start on day 1</li><li>A High School Diploma or equivalent</li><li>Must possess a valid driver’s license for a minimum of 12 months, with no major or frequent traffic violations in the last 3 years</li><li>A strong desire to learn a trade and directly impact the world around you</li></ul>Compensation: Enter hourly rate here $$$$Additional Compensation: Sign-on bonus availableAdditional Requirements and Environmental Exposure:· Must be able to safely and legally operate a vehicle using a seat belt· Must be able to wear helmets, safety goggles, fall protection harness and safety boots to safely perform job duties· Must be able to twist the trunk of your body 90 degrees in each direction· Must be able to squat and touch the floor with both hands· Must be able to reach your hands over your head· Must be able to stand on concrete surfaces for extended periods, routinely up to 4 hours· This position is highly physical and requires regular use of hands, fingers, walking, stooping, kneeling and climbing ladders. It requires employees to regularly lift and or move up to 10 lbs., frequently lift and/or move up to 40 lbs. and occasionally lift and/or move more than 40 lbs.· Must be able to safely use a ladder with a 350 lb. total weight limit, while carrying equipment of 50 lbs. or less· Must be able to maneuver confined access areas, as small as 30” vertical x 45” horizontal· Must be able to comfortably and routinely access rooftops with extension and/or fixed ladders at heights of 15’ to 20’, and occasionally, up to 50 feet · This role may be exposed to variable weather conditions, moving mechanical parts, heights, risk of electrical shock, noisy operating equipment and other variable environmental conditions based on location.Compensation: $18.32 - $34.38 per hourAdditional Compensation: Sign-on bonus availableDisclaimer: This "range" could be a result of seniority, merit, geographic location where the work is performed, education, experience, travel requirements for the job, or because of a system the employer uses to measure earnings by quantity or quality of production (so, for example, positions that may not have traditional salary ranges).We offer competitive compensation and comprehensive benefits and programs. We are an equal opportunity employer; all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, pregnancy, age, marital status, disability, status as a protected veteran, or any legally protected status.

Apprentice Technician - Valley View, OH

At Trane TechnologiesTM (https://www.tranetechnologies.com) and through our businesses including Trane® (https://www.trane.com) and Thermo King® (https://www.Thermoking.com) , we create innovative climate solutions for buildings, homes, and transportation that challenge what’s possible for a sustainable world. We're a team that dares to look at the world's challenges and see impactful possibilities. We believe in a better future when we uplift others and enable our people to thrive at work and at home. We boldly go.Job Summary:• Responsible for commissioning, programming, setting up graphics, communications link, end to end testing, troubleshooting and servicing on assigned projects.• Responsible for documenting point to point verification, sequence of operations validation and job close out requirements.• Represents the company by serving as the direct customer contact and is responsible for servicing products and equipment on assigned projects, ensuring customer satisfaction by identifying, diagnosing and repairing equipment and systems at customer’s location.• Coordinates with team leader and customer to precisely understand requirements for all on-site installation and repairs by extensively examining building layouts, forecasting issues, gathering materials and synchronizing on-site work.• Keeps current on Trane products concerning installation, operation, maintenance, service, and repair of direct digital control systems.• Continually enforces safety to the highest standards and maintains security and accountability of company issued and procured assets by recording use, wear and conditions.• Displays team effort and dedication to customer by maintaining flexibility to work overtime and weekends as the business requires, including occasional overnight stays.Qualifications:• A High School Diploma or equivalent, or certificate of completion from an accredited technical school is required. Typically requires at least 7 years of experience in HVAC/Controls. Technical School or formal training is preferred.• Operating knowledge of Microsoft office software and working proficiency with hand held computer (i.e. Smartphone, iPad).• Must possess a valid driver’s license for a minimum of 12 months, with no major or frequent traffic violations including, but not limited to:• DUI, Hit &amp; Run, License Suspension, Reckless / Careless Driving or multiple smaller infractions or preventable collisions in the previous 3 years.• Previous experience with DDC controls system preferred.Additional Requirements and Environmental Exposure• Must be able to safely and legally operate a vehicle using a seat belt• Must be able to wear helmets, safety goggles, fall protection harness and safety boots to safely perform job duties• Must be able to twist the trunk of your body 90 degrees in each direction• Must be able to squat and touch the floor with both hands• Must be able to reach your hands over your head• Must be able to stand on concrete surfaces for extended periods, routinely up to 4 hours• This position is highly physical and requires regular use of hands, fingers, walking, stooping, kneeling and climbing ladders. It requires employees to regularly lift and or move up to 10 lbs. and frequently lift and/or move up to 40 lbs. (may occasionally lift and/or move more than 40 lbs with special approval.)• Must be able to safely use a ladder with a 375 lb. total weight limit, while wearing equipment weighing up to 50 lbs.• Must be able to maneuver access areas, as small as 30” vertical x 45” horizontal• Must be able to comfortably and routinely access rooftops with extension and/or fixed ladders at heights of 15’ to 20’, and occasionally, up to 50 feet • This role may be exposed to variable weather conditions, moving mechanical parts, heights, risk of electrical shock, noisy operating equipment and other variable environmental conditions based on locationCompensation: $21.78 - $40.05 per hourAdditional Compensation: Sign-on bonus availableDisclaimer: This "range" could be a result of seniority, merit, geographic location where the work is performed, education, experience, travel requirements for the job, or because of a system the employer uses to measure earnings by quantity or quality of production (so, for example, positions that may not have traditional salary ranges).We offer competitive compensation and comprehensive benefits and programs. We are an equal opportunity employer; all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, pregnancy, age, marital status, disability, status as a protected veteran, or any legally protected status.

Controls Technician - Holland, OH

At Trane Technologies TM and through our businesses including Trane ® and Thermo King ® , we create innovative climate solutions for buildings, homes, and transportation that challenge what’s possible for a sustainable world. We're a team that dares to look at the world's challenges and see impactful possibilities. We believe in a better future when we uplift others and enable our people to thrive at work and at home. We boldly go.Why Trane Technologies Is The Best Company for HVAC Field Technician Apprentices:<ul><li>Trane is recognized worldwide as the brand standard for HVAC and Building Controls Systems</li><li>Highly competitive and comprehensive total compensation program including total cash compensation, benefits, holiday and vacation</li><li>Dedicated to a military friendly environment (Veterans are highly encouraged to apply)</li><li>Unlimited opportunities for career development and promotions</li><li>Determined focus to be the employer of choice in our industry (we want to be the company where everyone wants to work)</li><li>World Class continuing education, featuring Manufacturer (OEM) Level Training</li><li>Company-wide commitment to promoting a strong work/life balance</li><li>Organizational encouragement of community involvement and sustainability (green initiatives)</li></ul>Job Summary:As a HVAC Field Technician Apprentice, you will be primarily responsible for assisting HVAC Field Technicians in the installation and repair of environmental control systems, utilizing knowledge of refrigeration theory, control systems, pipe fitting, and structural layouts. Trane Technologies affords you the opportunity to work directly for a leading manufacture giving you access to technical support, training on newest technology and comprehensive career paths with opportunity for growth. In this position you will establish &amp; maintain a positive relationship with customers, vendors and co-workers through effective oral and written communication skills via phone, computer, and face to face. You will perform scheduled and unscheduled preventative maintenance, inspections, site surveys, and service requests including replacement, and modifications of equipment or systems as needed or requested by customers. Responsible for assisting and learning end to end testing, starting up, commissioning, and servicing on assigned projects.<ul><li>Represents the company by learning to serve as the direct customer contact and is responsible for servicing products and equipment on assigned projects, ensuring customer satisfaction by identifying, examining, diagnosing and repairing equipment and systems at customer’s location.</li><li>Coordinates with supervising field technician/project manager and customer to precisely understand requirements for all on-site installation and repairs by forecasting issues, gathering materials and synchronizing on-site work.</li><li>Uses cutting edge software and technology, along with a variety of hand-tools, following blueprints or engineering specifications, to diagnose and repair units.</li><li>Continually enforces safety to the highest standards and maintains security and accountability of company issued and procured assets by recording use, wear and conditions.</li><li>Displays team effort and dedication to customer by maintaining flexibility to work overtime and weekends as the business requires, including occasional overnight stays.</li><li>Late model, clean, and dependable company vehicle, high speed laptop, and smart phone</li></ul>Qualifications:<ul><li>A High School Diploma or equivalent, or certificate of completion from an accredited technical school is required. Prefer 2 plus years of experience in HVAC. Technical School or formal training is preferred.</li><li>Operating knowledge of Microsoft office software and working proficiency with hand held computer (i.e. Smartphone, iPad).</li><li>Must possess a valid driver’s license for a minimum of 12 months, with no major or frequent traffic violations including, but not limited to:</li><li>DUI, Hit &amp; Run, License Suspension, Reckless / Careless Driving or multiple smaller infractions or preventable collisions in the previous 3 years.</li><li>EPA Certification Preferred (e.g. HVAC Journeyman, Boiler Operator, Gas Installer etc.).</li></ul>Additional Requirements and Environmental Exposure<ul><li>Must be able to safely and legally operate a vehicle using a seat belt</li><li>Must be able to wear helmets, safety goggles, fall protection harness and safety boots to safely perform job duties</li><li>Must be able to twist the trunk of your body 90 degrees in each direction</li><li>Must be able to squat and touch the floor with both hands</li><li>Must be able to reach your hands over your head</li><li>Must be able to stand on concrete surfaces for extended periods, routinely up to 4 hours</li><li>This position is highly physical and requires regular use of hands, fingers, walking, stooping, kneeling and climbing ladders. It requires employees to regularly lift and or move up to 10 lbs. and frequently lift and/or move up to 40 lbs. (may occasionally lift and/or move more than 40 lbs. with special approval.)</li><li>Must be able to safely use a ladder with a 375 lb. total weight limit, while wearing equipment weighing up to 50 lbs.</li><li>Must be able to maneuver access areas, as small as 30” vertical x 45” horizontal</li><li>Must be able to comfortably and routinely access rooftops with extension and/or fixed ladders at heights of 15’ to 20’, and occasionally, up to 50 feet + This role may be exposed to variable weather conditions, moving mechanical parts, heights, risk of electrical shock, noisy operating equipment and other variable environmental conditions based on location</li></ul>We offer competitive compensation and comprehensive benefits and programs. We are an equal opportunity employer; all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, pregnancy, age, marital status, disability, status as a protected veteran, or any legally protected status.

Apprentice Technician

At Trane TechnologiesTM (https://www.tranetechnologies.com) and through our businesses including Trane® (https://www.trane.com) and Thermo King® (https://www.Thermoking.com) , we create innovative climate solutions for buildings, homes, and transportation that challenge what’s possible for a sustainable world. We're a team that dares to look at the world's challenges and see impactful possibilities. We believe in a better future when we uplift others and enable our people to thrive at work and at home. We boldly go.Why Trane Technologies Is The Best Company for Sr. HVAC Field Technicians• Trane is recognized worldwide as the brand standard for HVAC and Building Controls Systems• Highly competitive and comprehensive total compensation program including total cash compensation, benefits, holiday and vacation• Dedicated to a military friendly environment (Veterans are highly encouraged to apply)• Unlimited opportunities for career development and promotions• Determined focus to be the employer of choice in our industry (we want to be the company where everyone wants to work)• World Class continuing education, featuring Manufacturer (OEM) Level Training• Company-wide commitment to promoting a strong work/life balance• Organizational encouragement of community involvement and sustainability (green initiatives)• Late model, clean, and dependable company vehicle, high speed laptop, uniforms, and smart phoneJob Summary:This role is the primary service and maintenance contact for Trane Technologies customers in a defined market with a diverse commercial base including Healthcare, Process Manufacturing Facilities, Education Institutions, and Office Complexes. You will be commissioning, troubleshooting, repairing, and starting up HVAC systems in a commercial environment. In order to perform your task you will utilize your knowledge of air conditioning theory, pipe fitting, and mechanical layouts. This position affords you the opportunity to work with internal and external partners ranging from new facility set ups to existing facility retro fits. Trane affords you the opportunity to work directly for a leading manufacture giving you access to technical support, training on newest technology and comprehensive career paths with opportunity for growth.• Responsible for end to end testing, downloading programming, starting up, commissioning, and servicing on assigned projects.• Represents the company by serving as the direct customer contact and is responsible for servicing products and equipment on assigned projects, ensuring customer satisfaction by identifying, examining, diagnosing and repairing equipment and systems at customer’s location.• Coordinates with team leader/project manager and customer to precisely understand requirements for all on-site installation and repairs by forecasting issues, gathering materials and synchronizing on-site work.• Uses cutting edge software and technology, along with a variety of hand-tools, following blueprints or engineering specifications, to diagnose and repair units.• Continually enforces safety to the highest standards and maintains security and accountability of company issued and procured assets by recording use, wear and conditions.• Mentor team members. Display team effort and dedication to customer by maintaining flexibility to work overtime and weeks as the business requires, including occasional overnight stays.Qualifications:• A High School Diploma or equivalent, or certificate of completion from an accredited technical school is required. Typically requires at least 10 plus years of experience in HVAC. Technical School or formal training is preferred.• Operating knowledge of Microsoft office software and working proficiency with hand held computer (i.e. Smartphone, iPad).• Must possess a valid driver’s license for a minimum of 12 months, with no major or frequent traffic violations including, but not limited to:<ul><li>DUI, Hit &amp; Run, License Suspension, Reckless / Careless Driving or multiple smaller infractions or preventable collisions in the previous 3 years.</li></ul>• EPA Certification Preferred (e.g. HVAC Journeyman, Boiler Operator, Gas Installer etc.).Additional Requirements and Environmental Exposure• Must be able to safely and legally operate a vehicle using a seat belt• Must be able to wear helmets, safety goggles, fall protection harness and safety boots to safely perform job duties• Must be able to twist the trunk of your body 90 degrees in each direction• Must be able to squat and touch the floor with both hands• Must be able to reach your hands over your head• Must be able to stand on concrete surfaces for extended periods, routinely up to 4 hours• This position is highly physical and requires regular use of hands, fingers, walking, stooping, kneeling and climbing ladders. It requires employees to regularly lift and or move up to 10 lbs. and frequently lift and/or move up to 40 lbs. (may occasionally lift and/or move more than 40 lbs. with special approval.)• Must be able to safely use a ladder with a 375 lb. total weight limit, while wearing equipment weighing up to 50 lbs.• Must be able to maneuver access areas, as small as 30” vertical x 45” horizontal• Must be able to comfortably and routinely access rooftops with extension and/or fixed ladders at heights of 15’ to 20’, and occasionally, up to 50 feet • This role may be exposed to variable weather conditions, moving mechanical parts, heights, risk of electrical shock, noisy operating equipment and other variable environmental conditions based on locationWe offer competitive compensation and comprehensive benefits and programs. We are an equal opportunity employer; all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, pregnancy, age, marital status, disability, status as a protected veteran, or any legally protected status.

Sr. HVAC Technician

About RivianRivian is on a mission to keep the world adventurous forever. This goes for the emissions-free Electric Adventure Vehicles we build, and the curious, courageous souls we seek to attract.As a company, we constantly challenge what's possible, never simply accepting what has always been done. We reframe old problems, seek new solutions and operate comfortably in areas that are unknown. Our backgrounds are diverse, but our team shares a love of the outdoors and a desire to protect it for future generations.Role SummaryThe Field Service Technician will be responsible for overdelivering on the internal and external customer experience at our service locations. The ideal candidate will possess the technical acumen and the ability to provide a strong level of customer service. If you're able to think quickly on your feet, have a go-getter attitude, possess great communication skills, and have a passion for adventure, then we want you on the team. You will be working with our internal partners every day to assist with service needs and coordinate with our Service, Vehicle and Delivery Operations, and Field Service Engineer teams. This role will require a dynamic and resourceful leader with excellent oral and written communications skills, who will foster cross functional interaction and champion a culture of continuous improvement to support Service teams and customers within a Service center. To be successful in this role, you must have a customer-first approach, thrive in ambiguous and unexpected environments, tackling all challenges with a creative and flexible mindset. Experience in automotive, process standardization, continuous improvement, and managing escalations is a plus.ResponsibilitiesInitially help support pre-production vehicle builds, including assisting cross functional teamsTravel to locations to support as required until the local Service Center opens, including but not limited to, production plantOperate remotely until the local service center opens, if applicableFollow Rivian repair procedures with efficiency without compromising quality and safetyPerform complex diagnosis, repairs, installations, and inspections on vehiclesPerform vehicle repairs in a setting outside of a service centerConduct road tests on vehicles to ensure quality of the repairPerform necessary parts operations such as parts ordering, receiving, shipping and inventoryStay up to date with technical skills and required trainingSupport campaigns and containment initiativesMaintain and process accurate expense reporting as neededMaintain high quality work and efficiency while working with little supervisionWork with a collaborative attitude and team spirit in an ever-changing, dynamic environmentProvide service support to the field to support the Service organizationAbility to perform duties and communicate with a high level of professionalism, in a customer-facing environmentAdditional plant support, including travel, may be required depending on business needQualificationsHS Diploma or GED preferredGraduated from an accredited automotive repair school preferredExperience with leadership, mentorship, and influencing a team preferred5 or more years of automotive experience preferred3 or more years' experience working on vehicle high voltage systems and HV diagnostic work preferredProficient in navigating a laptop or computer in a windows or Mac environmentExperience using test tools (PICO-Scope, PCAN, Kavaser Memorator, breakout box etc.)Extensive experience in bumper-to-bumper diagnosis and repairAbility to drive non-commercial truck and trailer preferredAbility to travel up to 75% of the time, or as neededMust possess a valid driver's license, and maintain a clean driving recordNo driving related suspensions or revocation of Driver License (with

A pioneering automotive tech company driving the shift towards sustainable mobility with innovative products and services.

Field Service Technician IV - Remote Ohio

We Are: Accenture’s SAP Integrated Platform Team (IPT), a team of individuals that bring a blend of SAP, advisory, and industry expertise to help our industry-leading clients transform their business and accelerate value through SAP-led business transformations. Our team helps our clients define the path for their business transformations and guide them through their journeys, with a focus on delivering value, enabling innovation, and addressing their business challenges. We bring a strong point-of-view on industry, technology and functional topics to senior executives at industry-leading companies. We focus on defining our clients’ transformation roadmaps, identifying value opportunities, shaping our clients processes and solutions, and leading large complex business transformation programs enabled by SAP technologies. Internally, our team is the muscle for new SAP thinking and capability development. We lead the most strategic sales pursuits and develop new capabilities that make our practice a place for big opportunities and continuous learning and development. Our hands-on experience is complemented by our strong emphasis on training on S/4HANA, all cloud products from SAP, and new technologies and innovation.Our team is part of Accenture’s global SAP community. We are leaders in the marketplace, with more than 70,000 SAP practitioners globally and over 70 SAP awards—more than any other partner. Visit us here to find out more about Accenture's SAP practice. (https://www.accenture.com/us-en/service-technology-sap-overview) You Are: A proven client adviser, excited of solving our clients’ toughest business challenges with SAP technologies. You lead your clients with a strong point of view that you have constructed with your experience helping fortune 500 clients address the challenges of sustainably modernizing and digitizing their enterprises. You possess broad transformation and industry experience, and deep SAP functional skills. You can lead projects and teams and have strong communication, people and executive presence skills that help you build credibility with senior client executives. The Work:<ul><li>Focus on selling and delivering SAP Sustainability Cloud solutions (e.g. SAP Sustainability Footprint Management, SAP Responsible Design and Production, SAP Sustainability Control Tower).</li><li>Leverage your Sustainability knowledge and SAP functional and technical expertise to enable clients’ capabilities to drive business outcomes.</li><li>Identify any integrations across other applications for to enable Sustainability and work with relevant groups to coordinate including SAP for new applications</li><li>Support our One Accenture strategy by collaborating across Strategy &amp; Consulting, Technology, Interactive (Song), and Operations to drive value for our clients.</li><li>Lead delivery of Sustainability roadmaps and business case development, as well as help to drive out-of-the-box standard processers where applicable and innovate where there are differentiated capabilities required</li><li>Build strong, trusting relationships with your clients’ senior leaders to help Accenture become the go-to partner in bringing their long-term vision to life</li><li>Grow Accenture’s SAP Sustainability practice by leading business development, proposal submission, and sales efforts</li><li>Travel may be required for this role. The amount of travel will vary from 0 to 100% depending on business and client requirementsHere’s What You Need:</li><li>Minimum 5 years of experience in SAP ERP and SAP S/4 HANA or SAP ECC roadmap initiatives that help clients pivot to the new and enable new capabilities, preferably in the Supply Chain domain.</li><li>Experience leading and providing Transformation/Consulting/Advisory Services (e.g., Business Case, Roadmap, Process Improvement, etc.)</li><li>Understanding of end-to-end business process transformation (e.g., DTS, STP, RTR, OTC, PTP, etc.) Management consulting skills such as business process mapping, KPI and PPI benchmarking, value realization, change management, etc.</li><li>Experience managing teams, including offshore teams</li><li>Bachelor's degree or equivalent (minimum 12 years' work experience). If Associate’s Degree, must have equivalent minimum 6-year work experience.Bonus Points If:</li><li>You have Broad transformation and functional experience, along with expertise in an overall Solution Architect or Delivery role. Example skills:</li><li>Experience in transforming client’s Sustainability requirements and use cases and translating that to value by creating solutions with SAP applications</li><li>Experience in SAP Cloud for Sustainable Enterprises solutions</li><li>Experience in SAP EHS, SAP PP, SAP PM/ IAM/EAM, SAP Ariba/ Procurement, SAP TM, SAP LBN</li><li>Deep industry knowledge in Sustainability domains such as Climate, Circular Economy, Social, ESG reporting</li><li>Experience in other/ non-SAP ESG reporting platforms</li><li>Have authored industry thought leadership and/or led co-development activities with SAP</li><li>Able to articulate S/4 HANA business suite capabilities over ECCCompensation at Accenture varies depending on a wide array of factors, which may include but are not limited to the specific office location, role, skill set, and level of experience. As required by local law, Accenture provides a reasonable range of compensation for roles that may be hired in California, Colorado, New York or Washington as set forth below. We accept applications on an on-going basis and there is no fixed deadline to apply. Information on benefits is here. (https://www.accenture.com/us-en/careers/local/total-rewards) California: $93,400 to $258,500 Colorado: $93,400 to $223,300 New York: $86,500 to 258,500 Washington: $99,500 to $237,800 #LI-NA #LI-MP </li></ul>What We BelieveWe have an unwavering commitment to diversity with the aim that every one of our people has a full sense of belonging within our organization. As a business imperative, every person at Accenture has the responsibility to create and sustain an inclusive environment.Inclusion and diversity are fundamental to our culture and core values. Our rich diversity makes us more innovative and more creative, which helps us better serve our clients and our communities. Read more here (https://www.accenture.com/us-en/about/inclusion-diversity/us-workforce) Equal Employment Opportunity StatementAccenture is an Equal Opportunity Employer. We believe that no one should be discriminated against because of their differences, such as age, disability, ethnicity, gender, gender identity and expression, religion or sexual orientation.All employment decisions shall be made without regard to age, race, creed, color, religion, sex, national origin, ancestry, disability status, veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status or any other basis as protected by federal, state, or local law.Accenture is committed to providing veteran employment opportunities to our service men and women.For details, view a copy of the Accenture Equal Employment Opportunity and Affirmative Action Policy Statement (https://www.accenture.com/content/dam/accenture/final/accenture-com/document/Annual-Policy-Statement-Regarding-EEO-2023-Applicant.pdf#zoom=50) .Requesting An AccommodationAccenture is committed to providing equal employment opportunities for persons with disabilities or religious observances, including reasonable accommodation when needed. If you are hired by Accenture and require accommodation to perform the essential functions of your role, you will be asked to participate in our reasonable accommodation process. Accommodations made to facilitate the recruiting process are not a guarantee of future or continued accommodations once hired.If you would like to be considered for employment opportunities with Accenture and have accommodation needs for a disability or religious observance, please call us toll free at 1 (877) 889-9009, send us an email (https://www.accenture.com/us-en/about/contact-us) or speak with your recruiter.Other Employment StatementsApplicants for employment in the US must have work authorization that does not now or in the future require sponsorship of a visa for employment authorization in the United States.Candidates who are currently employed by a client of Accenture or an affiliated Accenture business may not be eligible for consideration.Job candidates will not be obligated to disclose sealed or expunged records of conviction or arrest as part of the hiring process.The Company will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. Additionally, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the Company's legal duty to furnish information.

SAP Sustainability Manager

About RivianRivian is on a mission to keep the world adventurous forever. This goes for the emissions-free Electric Adventure Vehicles we build, and the curious, courageous souls we seek to attract.As a company, we constantly challenge what's possible, never simply accepting what has always been done. We reframe old problems, seek new solutions and operate comfortably in areas that are unknown. Our backgrounds are diverse, but our team shares a love of the outdoors and a desire to protect it for future generations.Role SummaryThe Field Service Technician will be responsible for overdelivering on the internal and external customer experience at our service locations. The ideal candidate will possess the technical acumen and the ability to provide a strong level of customer service. If you're able to think quickly on your feet, have a go-getter attitude, possess great communication skills, and have a passion for adventure, then we want you on the team. You will be working with our internal partners every day to assist with service needs and coordinate with our Service, Vehicle and Delivery Operations, and Field Service Engineer teams. This role will require a dynamic and resourceful leader with excellent oral and written communications skills, who will foster cross functional interaction and champion a culture of continuous improvement to support Service teams and customers within a Service center. To be successful in this role, you must have a customer-first approach, thrive in ambiguous and unexpected environments, tackling all challenges with a creative and flexible mindset. Experience in automotive, process standardization, continuous improvement, and managing escalations is a plus.ResponsibilitiesInitially help support pre-production vehicle builds, including assisting cross functional teamsTravel to locations to support as required until the local Service Center opens, including but not limited to, production plantOperate remotely until the local service center opens, if applicableFollow Rivian repair procedures with efficiency without compromising quality and safetyPerform or assist with assigned diagnosis, repairs, installations, and inspections on vehiclesAssist or support vehicle repairs in a setting outside of a service centerConduct road tests on vehicles to ensure quality of the repairPerform necessary parts operations such as parts ordering, receiving, shipping and inventoryStay up to date with technical skills and required trainingSupport campaigns and containment initiativesMaintain and process accurate expense reporting as neededMaintain high quality work and efficiency while working with little supervisionWork with a collaborative attitude and team spirit in an ever-changing, dynamic environmentProvide service support to the field to support the Service organizationAbility to perform duties and communicate with a high level of professionalism, in a customer facing environmentAdditional plant support, including travel, may be required depending on business needsAbility to properly document repairs completed and in processThis role may transition from remote to on-site and require in-person work, on-site at the service center should one be opened within 90 miles or 2 hours of the employee's assigned remote work location.QualificationsHS Diploma or GED preferredGraduated from an accredited automotive repair school preferred5 or more years' experience in a traditional automotive repair shop preferredProficient in using hand tools and power toolsProficient in navigating a laptop or computer in a windows or Mac environmentKnow basics of diagnosis and workflowsAble to read electrical schematicsLimited Diagnostic exposureUnderstands how high voltage and low voltage electricity works (basic electricity theory)Able to perform tire

Field Service Technician III - Night Shift

At Trane Technologies TM and through our businesses including Trane ® and Thermo King ® , we create innovative climate solutions for buildings, homes, and transportation that challenge what’s possible for a sustainable world. We're a team that dares to look at the world's challenges and see impactful possibilities. We believe in a better future when we uplift others and enable our people to thrive at work and at home. We boldly go.Why Trane Is the Best Company for HVAC Field Technicians:<ul><li>Trane is recognized worldwide as the brand standard for HVAC and Building Controls Systems</li><li>Highly competitive and comprehensive total compensation program including total cash compensation, benefits, holiday and vacation</li><li>Dedicated to a military friendly environment (Veterans are highly encouraged to apply)</li><li>Unlimited opportunities for career development and promotions</li><li>Determined focus to be the employer of choice in our industry (we want to be the company where everyone wants to work)</li><li>World Class continuing education, featuring Manufacturer (OEM) Level Training</li><li>Company-wide commitment to promoting a strong work/life balance</li><li>Organizational encouragement of community involvement and sustainability (green initiatives)</li><li>Late model, clean, and dependable company vehicle, high speed laptop, uniforms, and smart phone</li></ul>Job Summary：This role is the primary service and maintenance contact for Trane Technologies customers in a defined market with a diverse commercial base including Healthcare, Process Manufacturing Facilities, Education Institutions, and Office Complexes. You will be commissioning, troubleshooting, repairing, and starting up HVAC systems in a commercial environment. In order to perform your task you will utilize your knowledge of air conditioning theory, pipe fitting, and mechanical layouts. This position affords you the opportunity to work with internal and external partners ranging from new facility set ups to existing facility retro fits. Trane affords you the opportunity to work directly for a leading manufacture giving you access to technical support, training on newest technology and comprehensive career paths with opportunity for growth<ul><li>Coordinates with team leader/project manager and customer to precisely understand requirements for all on-site installation and repairs by forecasting issues, gathering materials and synchronizing on-site work.</li><li>Represents the company by serving as the direct customer contact and is responsible for products and equipment on assigned projects, ensuring customer satisfaction by identifying, diagnosing and repairing equipment and systems at customer’s location.</li><li>Uses cutting edge software and technology, along with a variety of hand-tools, following blueprints or engineering specifications, to diagnose and repair units.</li><li>Displays team effort and dedication to customer by maintaining flexibility to work overtime and weekends as the business requires, including occasional overnight stays.</li><li>Continually enforces safety to the highest standards and maintains security and accountability of company issued and procured assets by recording use, wear and conditions.</li></ul>Qualifications:<ul><li>A High School Diploma or equivalent required, and typically 5 plus years of experience in HVAC. Technical School or formal training is preferred.</li><li>Operating knowledge of Microsoft office software and working proficiency with hand held computer (i.e. Smartphone, iPad).</li><li>Must possess a valid driver’s license for a minimum of 12 months, with no major or frequent traffic violations including, but not limited to:</li><li>DUI, Hit &amp; Run, License Suspension, Reckless / Careless Driving or multiple smaller infractions or preventable collisions in the previous 3 years.</li><li>EPA Certification</li></ul>Additional Requirements and Environmental Exposures:<ul><li>Must be able to safely and legally operate a vehicle using a seat belt</li><li>Must be able to wear helmets, safety goggles, fall protection harness and safety boots to safely perform job duties</li><li>Must be able to twist the trunk of your body 90 degrees in each direction</li><li>Must be able to squat and touch the floor with both hands</li><li>Must be able to reach your hands over your head</li><li>Must be able to stand on concrete surfaces for extended periods, routinely up to 4 hours</li><li>This position is highly physical and requires regular use of hands, fingers, walking, stooping, kneeling and climbing ladders. It requires employees to regularly lift and or move up to 10 lbs., frequently lift and/or move up to 40 lbs. and occasionally lift and/or move more than 40 lbs.</li><li>Must be able to safely use a ladder with a 350 lb. total weight limit, while carrying equipment of 50 lbs. or less</li><li>Must be able to maneuver confined access areas, as small as 30” vertical x 45” horizontal</li><li>Must be able to comfortably and routinely access rooftops with extension and/or fixed ladders at heights of 15’ to 20’, and occasionally, up to 50 feet + This role may be exposed to variable weather conditions, moving mechanical parts, heights, risk of electrical shock, noisy operating equipment and other variable environmental conditions based on location</li></ul>We offer competitive compensation and comprehensive benefits and programs. We are an equal opportunity employer; all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, pregnancy, age, marital status, disability, status as a protected veteran, or any legally protected status.

HVAC Service Technician

THIS ROLE WILL BE BASED OUT OF SAN ANGELO, TXAt Trane Technologies TM and through our businesses including Trane ® and Thermo King ® , we create innovative climate solutions for buildings, homes, and transportation that challenge what’s possible for a sustainable world. We're a team that dares to look at the world's challenges and see impactful possibilities. We believe in a better future when we uplift others and enable our people to thrive at work and at home. We boldly go.Why Trane Technologies Is The Best Company for HVAC Field Technicians:<ul><li>Trane is recognized worldwide as the brand standard for HVAC and Building Controls Systems</li><li>Highly competitive and comprehensive total compensation program including total cash compensation, benefits, holiday and vacation</li><li>Dedicated to a military friendly environment (Veterans are highly encouraged to apply)</li><li>Unlimited opportunities for career development and promotions</li><li>Determined focus to be the employer of choice in our industry (we want to be the company where everyone wants to work)</li><li>World Class continuing education, featuring Manufacturer (OEM) Level Training</li><li>Company-wide commitment to promoting a strong work/life balance</li><li>Organizational encouragement of community involvement and sustainability (green initiatives)</li><li>Late model, clean, and dependable company vehicle, high speed laptop, uniforms, and smart phone</li></ul>Job Summary：This role is the primary service and maintenance contact for Trane Technologies customers in a defined market with a diverse commercial base including Healthcare, Process Manufacturing Facilities, Education Institutions, and Office Complexes. You will be commissioning, troubleshooting, repairing, and starting up HVAC systems in a commercial environment. In order to perform your task you will utilize your knowledge of air conditioning theory, pipe fitting, and mechanical layouts. This position affords you the opportunity to work with internal and external partners ranging from new facility set ups to existing facility retro fits. Trane affords you the opportunity to work directly for a leading manufacture giving you access to technical support, training on newest technology and comprehensive career paths with opportunity for growth<ul><li>Coordinates with team leader/project manager and customer to precisely understand requirements for all on-site installation and repairs by forecasting issues, gathering materials and synchronizing on-site work.</li><li>Represents the company by serving as the direct customer contact and is responsible for products and equipment on assigned projects, ensuring customer satisfaction by identifying, diagnosing and repairing equipment and systems at customer’s location.</li><li>Uses cutting edge software and technology, along with a variety of hand-tools, following blueprints or engineering specifications, to diagnose and repair units.</li><li>Displays team effort and dedication to customer by maintaining flexibility to work overtime and weekends as the business requires, including occasional overnight stays.</li><li>Continually enforces safety to the highest standards and maintains security and accountability of company issued and procured assets by recording use, wear and conditions</li></ul>Qualifications:<ul><li>A High School Diploma or equivalent required, and typically 5 plus years of experience in HVAC. Technical School or formal training is preferred.</li><li>Operating knowledge of Microsoft office software and working proficiency with hand held computer (i.e. Smartphone, iPad).</li><li>Must possess a valid driver’s license for a minimum of 12 months, with no major or frequent traffic violations including, but not limited to:</li><li>DUI, Hit &amp; Run, License Suspension, Reckless / Careless Driving or multiple smaller infractions or preventable collisions in the previous 3 years.</li><li>EPA Certification</li></ul>Additional Requirements and Environmental Exposure :<ul><li>Must be able to safely and legally operate a vehicle using a seat belt</li><li>Must be able to wear helmets, safety goggles, fall protection harness and safety boots to safely perform job duties</li><li>Must be able to twist the trunk of your body 90 degrees in each direction</li><li>Must be able to squat and touch the floor with both hands</li><li>Must be able to reach your hands over your head</li><li>Must be able to stand on concrete surfaces for extended periods, routinely up to 4 hours</li><li>This position is highly physical and requires regular use of hands, fingers, walking, stooping, kneeling and climbing ladders. It requires employees to regularly lift and or move up to 10 lbs., frequently lift and/or move up to 40 lbs. and occasionally lift and/or move more than 40 lbs.</li><li>Must be able to safely use a ladder with a 350 lb. total weight limit, while carrying equipment of 50 lbs. or less</li><li>Must be able to maneuver confined access areas, as small as 30” vertical x 45” horizontal</li><li>Must be able to comfortably and routinely access rooftops with extension and/or fixed ladders at heights of 15’ to 20’, and occasionally, up to 50 feet + This role may be exposed to variable weather conditions, moving mechanical parts, heights, risk of electrical shock, noisy operating equipment and other variable environmental conditions based on location</li></ul>We offer competitive compensation and comprehensive benefits and programs. We are an equal opportunity employer; all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, pregnancy, age, marital status, disability, status as a protected veteran, or any legally protected status.

Explore jobs

Get Hired

Discover climate organizations

Join our Fellowship

Post a job

Speak at our Fellowship

Become a Climatebase member

PLATFORMS

MEMBERS

WHO WE ARE