<div>At Wisk, we're transforming the future of urban mobility through safe, all-electric, autonomous flight. We are a passionate team working together toward a sustainable future, solving high-impact problems that have never been solved before. By delivering everyday flight for everyone, we're making it possible to spend less time getting there and more time being there. If you want to be part of shaping the future of mobility, then read on!</div><div><br></div><div>We are looking for a Senior Staff Power Electronics Engineer to join our team. The goal of this role at Wisk is to ensure that we design safe and reliable high power electronics for the aircraft. You will be part of the Propulsion team in the Powertrain IPT.</div><br><br><h3>What you will do:</h3><ul><li>As part of the Powertrain IPT organization and deployed in the Motor Controller Hardware Team, you will act as a seasoned engineer and designer focused in the design and development of low/high voltage electronics for a high power inverter.</li><li>You will take part in  designing high reliability power architectures and control electronics in accordance with relevant military standards, DO-254 standards, FMEA analysis, and tight tolerance/temperature restraints. </li><li>You will support motor controller testing, dyno testing, propeller testing, and also aircraft testing as an expert in power electronics.</li><li>You will take ownership of designs and oversee all aspects of lifecycle development including but not limited to: concept, board design, multi-functional team coordination, deployment of design into product lifecycle management (PLM) software, design verification testing, standardized documentation, requirements verification, and troubleshooting of issues during experimentation. </li><li>You will regularly coordinate with teams outside of the Motor Controller Team (mechanical, thermal, flight bus, systems, safety) and design to requirements as needed to meet goals of other IPTs.</li><li>You will help conceptualize designs that optimize the weight and power density of the propulsion unit.</li></ul><h3>What you have done:</h3><ul><li>PhD with 5 years experience, MSEE degree with at least 8 years of experience, or a BSEE/BSME degree with at least 12 years of experience</li><li>Experienced in developing multi-kilowatt power electronics and motor controllers</li><li>Experienced in weight optimizing power electronics</li><li>Experience designing for and troubleshooting EMI/EMC related issues</li><li>Experience in troubleshooting issues during the testing phase of integrated designs</li><li>A good grasp of analog and digital hardware development and validation techniques</li><li>Ability to model, simulate and optimize performance in MATLAB and PLECS</li><li>Great interpersonal skills</li><li>Excellent oral and written communication skills</li></ul><h3>Desired:</h3><ul><li>Familiarity with DO-160/DO-254 certification and aerospace development best practices and standards</li><li>Experience with weight minimization is strongly desired</li><li>Experience with 10kW and above three-phase motor drive hardware design is strongly desired</li><li>Motor Control theory (FOC, DTC, etc.)</li><li>Familiar with electromagnetic motor design</li><li>Familiarity with Altium designer</li><li>Experience developing thermal management approaches for power electronics</li><li>Familiarity with the latest SiC and GaN power electronic devices</li><li>Experience writing and executing test procedures for design validation and qualification</li><li>Familiarity with MIL-STD-461</li></ul><h3>Who you are:</h3><ul><li>You are a highly motivated, self starting individual with a broad set of skills and never afraid of facing complex technical challenges</li><li>You are a solution oriented individual with a strong analytical mindset</li><li>You have strong communication skills and can easily tailor your communications to suit the audience</li><li>You can adapt quickly or propose changes needed to achieve early results in a timely fashion</li><li>You embrace challenges and take commitments and deliver results within reasonable expectations</li><li>You are a positive team player</li></ul><br><div>We are located in Mountain View just a couple of hundred feet from Shoreline Lake and its surrounding walking/jogging trails. We offer a comprehensive benefits package including medical, dental, vision and life insurance, alternative work schedule (9/80), flexible time off, 11 company holidays, a 401(k) plan with 50% company matching vested immediately, commuter assistance, and education assistance. And on top of all that, we also offer a variety of perks such as free catered lunches, flight lessons, wellness allowances, snacks, drinks, fruit, employee referral bonus, charitable giving match, patent bonus program, happy hours and much more.</div><div><br></div><div>Wisk Aero provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Wisk Aero abides by applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.</div><div><br></div><div>Wisk Aero is an E-Verify employer. </div>

"Revolutionizing home cleaning with advanced robotics and AI to simplify household chores and enhance cleanliness."

Senior Staff Power Electronics Engineer

<div><p><span>A career at Lilium is for those who want to do something extraordinary</span><span>.</span><span> </span><span>We t</span><span>ake pride in pushing the </span><span>boundaries of </span><span>engineering, </span><span>technology and customer experience</span><span>. </span><span> </span></p><p><span>A</span><span>s </span><span>part of </span><span>a team, you</span><span> will</span><span> </span><span>tackle challenges</span><span> and</span><span> deliver something that has never been done before. </span><span>By joining Lilium you will have the opportunity to work with</span><span> </span><span>a</span><span> </span><span>world-class entrepreneurial team of more than  950</span><span> </span><span>people </span><span>who are  as passionate about </span><span>changing the world as you are. </span><span> </span></p><p><span>You will always act with safety and integrity in mind and embody our core behaviors of efficient and positive collaboration, ownership of time, continuous improvements and, ultimately delivering results.</span></p><p><span>We thrive on</span><span> </span><span>diversity </span><span>and</span><span> </span><span>creating an inclusive culture</span><span>, with more than 50 nationalities</span><span> currently</span><span> working </span><span>hard</span><span> </span><span>to bring our vision of a sustainable world to li</span><span>f</span><span>e.</span><span> </span></p></div><p><strong>Senior Systems Engineer - EPS</strong></p><p><strong>Your role and your team: </strong> </p><p>We are seeking a talented and passionate Senior Systems Engineer - Electrical Power System to join our dynamic team dedicated to revolutionizing the future of transportation through electric vertical takeoff and landing (eVTOL) technology. From power conversion to batteries, electrical design to aircraft integration, you will play a pivotal role in developing the cutting-edge electrical system that powers our advanced aircraft – with a focus on integrating, verifying and testing.</p><p>The Senior Systems Engineer - Electrical Power System is part of an interdisciplinary integrated project team responsible for all stages of development of our innovative electrical power system – especially addressing integration, verification and certification up to the delivery of the Lilium aircraft.</p><p><strong> Your Day to Day:</strong></p><ul><li>Integrate: Collaborate with cross-functional teams including electrical engineers, test engineers, laboratory owners and chief engineering to seamlessly integrate the energy storage, power conversion and power distribution equipment into our eVTOL powertrain at up to 1000 VDC.</li><li>Verify: Plan and coordinate system integration tests in our laboratories and on our aircraft.</li><li>Certify: Plan testing and prepare evidence to support certification of the system using the regulatory requirements.</li><li>Problem-solve: Investigate test issues and discover root causes in our innovative electrical power system.</li><li>Coordinate: Manage our equipment suppliers to approve, witness, and support external testing.</li><li>Design: Implement design changes to add functionality or resolve problems, and contribute to novel designs for future aircraft generations.</li><li>Document and Report: Create detailed technical requests, procedures, and reports, present findings and recommendations to cross-functional stakeholders and regulatory authorities when required.</li></ul><p><strong>Your Profile:</strong></p><ul><li>Degree in relevant engineering discipline such as Electrical Engineering, Physics or a related field.</li><li>Minimum 5 years of experience, either in civil aviation or on electric vehicles.</li><li>Knowledge of electrical power systems – particularly electric vehicle powertrains, lithium batteries, high voltage switching, power electronics, battery management, charging.</li><li>Experience with verification of aircraft or similar safety critical applications; especially coordinating with regulatory authorities and producing certification plans, compliance documents, verification matrices using requirement management tools (e.g. DOORS or Polarion)</li><li>Experience with systems engineering principles (e.g. ARP 4754/4761 or ISO 26262) and hardware and software development processes (e.g. DO-178 and 254).</li><li>Experience with electromagnetic environmental effects and environmental testing (e.g. DO-160).</li><li>Problem-solving skills and ability to work in a fast-paced environment.</li><li>Excellent English communication skills, both verbal and written.</li></ul><p>#LI-WK1</p><div><p><span>Want to know more? </span><span>Then view our </span><span>'<a href="https://lilium.com/careers">Why join Lilium</a></span><span>' </span><span>page!</span></p><p>Life at Lilium:</p><p>The wellbeing of our employees is a high priority. In our HQ we have many initiatives such as free healthy food and drinks, free in-house gym and health days. In remote offices we offer online opportunities to stay connected and develop yourself as well including our culture club, learning terminal, Employee Assistance Program and many more.</p><p> <em>Lilium is an equal opportunity employer and welcomes applications from all qualified individuals regardless of ethnicity, sex, disability, religion/belief, sexual orientation or age. </em> </p><p> </p><p> </p></div>

Revolutionary on-demand air mobility service using fully-electric vertical takeoff and landing aircraft. Transforming travel for all.

Senior Systems Engineer - EPS

<div><p><span>A career at Lilium is for those who want to do something extraordinary</span><span>.</span><span> </span><span>We t</span><span>ake pride in pushing the </span><span>boundaries of </span><span>engineering, </span><span>technology and customer experience</span><span>. </span><span> </span></p><p><span>A</span><span>s </span><span>part of </span><span>a team, you</span><span> will</span><span> </span><span>tackle challenges</span><span> and</span><span> deliver something that has never been done before. </span><span>By joining Lilium you will have the opportunity to work with</span><span> </span><span>a</span><span> </span><span>world-class entrepreneurial team of more than  950</span><span> </span><span>people </span><span>who are  as passionate about </span><span>changing the world as you are. </span><span> </span></p><p><span>You will always act with safety and integrity in mind and embody our core behaviors of efficient and positive collaboration, ownership of time, continuous improvements and, ultimately delivering results.</span></p><p><span>We thrive on</span><span> </span><span>diversity </span><span>and</span><span> </span><span>creating an inclusive culture</span><span>, with more than 50 nationalities</span><span> currently</span><span> working </span><span>hard</span><span> </span><span>to bring our vision of a sustainable world to li</span><span>f</span><span>e.</span><span> </span></p></div><p><strong>Senior Energy Test Engineer</strong></p><p><strong> </strong></p><p><strong>Your role and your team:</strong></p><p>You will report directly to the Team lead Energy Testing and work closely with our Component Testing team.</p><p>The Component Testing team is responsible for various disciplines covering component, system and whole aircraft tests. It is set up in three divisions: Testing, Test Management and Test Operations. Our team runs tests that facilitate certification, development, and research for the technology areas: Propulsion Systems, Batteries, Structures, Environmental Tests and Hardware in the Loop (HIL).</p><p>You will serve as the person of contact for all Battery tests and manage the complete process of testing from requirements breakdown &amp; concept development to test execution &amp; data processing by always keeping the goal of qualification and verification of our aircraft components in mind. You will setup and execute tests of small- and large-scale prototypes and provide valuable input for electrical, thermal, and mechanical battery engineers as well as for production.</p><p><strong>Your Day to Day:</strong></p><ul><li>Working with multi MW battery systems</li><li>Plan Tests and align with the Stakeholders</li><li>Planning and setup of labs and lab equipment</li><li>Close working with other integration engineers, particularly battery development</li><li>Analysis of test data and interpretation of the results</li><li>Planning, setup, and maintenance of test spaces and equipment</li><li>Design and operation of test benches for testing of electrical, electro-chemical, electro-mechanical components, including battery abuse tests</li><li>Coordination, preparation, and execution of tests of battery cells, modules, and packs as well as electric parts and components according to CS-23, DO-160, DO-311 and other standards, in-house and with partners</li><li>Provide critical feedback to relevant stakeholders (proposals for design changes, process adaptations, software bugfixes, etc.)</li><li>Support especially the Test Category Safety/Abuse and Environmental Testing</li><li>Support of production planning and end-of-line test setup</li><li>Work on ad hoc related tasks or projects provided by management</li><li>Working with the BMS System and Test Bench Software</li><li>Creating Post-Mortem Analysis and creating Reports</li></ul><p><strong>Your Profile:</strong></p><ul><li>MSc, PhD or equivalent degree in electrical/power/mechatronics engineering or a related field required</li><li>Strong knowledge of working in electrical labs and good practice of testing</li><li>At least 2 years of hands-on experience in working with battery Systems</li><li>Knowledge of BMS Functions, CAN Systems and general Test Bench Software</li><li>Experience in electrical and battery testing equipment like high power supplies and loads, data acquisition systems, battery test systems</li><li>Experienced in the use of battery module and battery system testing equipment (AVL, Kratzer, Basytec or similar)</li><li>EFK +AuS Status/Experience (Level 3E according to DGUV 209-093) for HV-Systems or similar hands on experience is a plus</li><li>Knowledge of battery systems, particularly Li-ion batteries is required</li><li>Experience in the automotive or aerospace field is a plus</li><li>Strong motivation to help build structures and processes</li><li>High level of self-reliance with the ability to work in a team, as well as autonomous</li><li>Target-oriented, driven work style with analytic problem-solving skills required</li><li>Fluent English language skills are essential, fluent German or any other language would be beneficial.</li></ul><p> </p><p> </p><p>#LI-SL1</p><div><p><span>Want to know more? </span><span>Then view our </span><span>'<a href="https://lilium.com/careers">Why join Lilium</a></span><span>' </span><span>page!</span></p><p>Life at Lilium:</p><p>The wellbeing of our employees is a high priority. In our HQ we have many initiatives such as free healthy food and drinks, free in-house gym and health days. In remote offices we offer online opportunities to stay connected and develop yourself as well including our culture club, learning terminal, Employee Assistance Program and many more.</p><p> <em>Lilium is an equal opportunity employer and welcomes applications from all qualified individuals regardless of ethnicity, sex, disability, religion/belief, sexual orientation or age. </em> </p><p> </p><p> </p></div>

Senior Battery Test Engineer

<div>At Wisk, we're transforming the future of urban mobility through safe, all-electric, autonomous flight. We are a passionate team working together toward a sustainable future, solving high-impact problems that have never been solved before. By delivering everyday flight for everyone, we're making it possible to spend less time getting there and more time being there. If you want to be part of shaping the future of mobility, then read on!</div><div><br></div><div>We are looking for an Electrical Engineer to join our Battery Management System (BMS) team of electrical engineers developing the energy storage and power distribution system for our electric eVTOL aircraft. The goal of a BMS Electrical Engineer at Wisk is to design and develop the electronic assemblies controlling and monitoring both low and high voltage, including the  power distribution and circuit protections. You will be part of Powertrain IPT working with the integrated product team that ensures the entire energy storage and power distribution system works safely and correctly.</div><br><br><h3>Within 3 months:</h3><ul><li>Learn about the BMS and aircraft electronics architecture and existing hardware/firmware</li><li>Design and develop the power control, monitoring and conversion system to produce regulated, isolated high and low voltage from the batteries</li><li>Construct and publish Circuit Block Diagrams to describe the architecture of the Battery Management System (BMS)</li><li>Become a reviewer of electrical design releases, assembly procedures, rework plans, and test results</li></ul><h3>Within 6 months:</h3><ul><li>Work in Altium to revise and improve the electrical circuits and subsystems while producing documentation for fabrication and assembly vendors</li><li>Perform component selection and qualification for the BMS and power distribution system</li><li>Support certification compliance testing, test witnessing, safety analysis, and documentation of electrical hardware</li><li>Lead board level and sub-system level troubleshooting and failure mode analysis</li><li>Contribute to writing requirements of new electrical systems, including design for manufacturing and design for testing.</li></ul><h3>Within 12 months:</h3><ul><li>Evaluate options for improving future battery management systems and power distribution architecture</li><li>Lead the effort to optimize weight savings throughout the ESPS electrical power, protection and distribution system</li><li>Be the focal point for aviation regulators (FAA, EASA, Etc) conversations on technical issue resolution with the High Voltage Battery System</li></ul><h3>What you have done:</h3><ul><li>B.S. in a relevant engineering discipline with at least 10 years of experience with the tasks listed above (M.S or PhD count towards years of experience)</li><li>Experience with development, design, analysis and test of: Analog Sensor Interfaces, Power Supplies, Topology Selection, and Microprocessor Integration for High Voltage Battery and power distribution systems</li><li>Experience in a rigorous development, verification, documentation environment similar to aerospace DO-254 is a plus.</li></ul><h3>Desired:</h3><ul><li>Design knowledge of electrical bonding criteria, thermal cooling requirements for electronic equipment, EMI shielding, and High Intensity Radiated Fields (HIRF) / Indirect Effects of Lightning (IEL) installation criteria is considered a plus</li><li>Understanding of and experience with designing and testing to Environmental Standards RTCA DO-160 (or equivalent MIL-Specs or Automotive standards)</li></ul><h3>Who you are:</h3><ul><li>You are a highly motivated, self starting individual with a broad set of skills and never afraid of facing complex technical challenges</li><li>You are a solution oriented individual with a strong analytical mindset</li><li>You have strong communication skills and can easily tailor your communications to suit the audience</li><li>You can adapt quickly or propose changes needed to achieve early results in a timely fashion</li><li>You embrace challenges and take commitments and deliver results within reasonable expectations</li><li>You are a positive team player</li></ul><br><div>We are located in Mountain View just a couple of hundred feet from Shoreline Lake and its surrounding walking/jogging trails. We offer a comprehensive benefits package including medical, dental, vision and life insurance, alternative work schedule (9/80), flexible time off, 11 company holidays, a 401(k) plan with 50% company matching vested immediately, commuter assistance, and education assistance. And on top of all that, we also offer a variety of perks such as free catered lunches, flight lessons, wellness allowances, snacks, drinks, fruit, employee referral bonus, charitable giving match, patent bonus program, happy hours and much more.</div><div><br></div><div>Wisk Aero provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Wisk Aero abides by applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.</div><div><br></div><div>Wisk Aero is an E-Verify employer. </div>

Senior Staff Electrical Engineer - BMS

<p>Pyka is looking for a Senior/Staff Mechanical Engineer to lead the internal development of custom battery packs for our large electric agricultural and cargo aircraft. In this role you will own the design of several unique pack assemblies from conceptualization to implementation in aircraft that are flying in the field for customers every day. </p><p>This role requires close collaboration with many teams both internal and external to Pyka including: Electrical Engineering, Manufacturing and Flight Operations, and component vendors - so excellent communication and project management skills are essential.</p><p>In this position you will contribute your expertise in battery pack design and play a critical role in developing systems that are incredibly reliable, durable, and easy for operators to use. </p><p>Candidates who thrive in small teams and fast-paced environments will love this role.</p><p><span style="font-weight:400;">Some of the way you will contribute in your first few weeks will include:</span></p><ul><li style="font-weight:400;"><span style="font-weight:400;">Work with technicians to build up several battery packs from start to finish to deeply understand the processes currently being employed</span></li><li style="font-weight:400;"><span style="font-weight:400;">Take over design responsible engineer duties for our next generation agricultural pack design</span></li><li style="font-weight:400;"><span style="font-weight:400;">Design ways to improve the robustness of our in-house battery pack ATP test stand</span></li><li style="font-weight:400;"><span style="font-weight:400;">Begin conceptual design of a rapid cargo battery swapping machine</span></li><li style="font-weight:400;"><span style="font-weight:400;">Address known issues and design solutions for our current generation charging infrastructure<br><br></span></li></ul><p><strong>About Pyka</strong></p><p><span style="font-weight:400;">Pyka’s goal is to provide society with a new form of fast, environmentally friendly, and accessible transportation enabled by autonomous electric aviation.</span></p><p><span style="font-weight:400;">To get there, we’re taking a different approach than most. We're applying our technologies to every industry where electric aircraft can be useful, starting with the highest value and most dangerous jobs. In doing so, we're building useful, game-changing products manufactured at scale, while perfecting the safety, reliability, and capabilities of our autonomy engine and electric propulsion systems. </span></p><p><span style="font-weight:400;">Today, we supply our aircraft to agricultural service providers and farmers as an autonomous tool that makes aerial crop protection safer, more targeted and less harmful to surrounding environments. Our vehicles are highly economical to operate and easy to deploy. What you work on at Pyka makes people’s lives better now and brings the future of electric aviation one-step closer each day.</span></p><p><span style="font-weight:400;">We design, develop and manufacture an ecosystem of technologies including proprietary flight control software, avionics, high power density motors, motor controllers, batteries, and custom carbon-fiber composite airframes.</span></p><p><span style="font-weight:400;">We foster a welcoming community within our company that promotes experimentation, asking questions, making simple solutions to complex problems, and expressing different views and opinions. We are a transparent company both internally and externally and do not believe in operating in “stealth mode.” Lastly, we don’t work 60 hour weeks, and don’t expect you to either. In this role you will have a great deal of responsibility, earn a competitive salary and benefits, and contribute to the development of groundbreaking technology.<br><br></span></p><p><strong>Responsibilities:</strong></p><ul><li style="font-weight:400;"><span style="font-weight:400;">Work closely with internal and external teams to lead the development work of both the agricultural and cargo battery packs<br><br></span></li><li style="font-weight:400;"><span style="font-weight:400;">Design ground based support equipment such as charging, swapping and transportation systems<br><br></span></li><li style="font-weight:400;"><span style="font-weight:400;">Pack level interconnect and mechanical design<br><br></span></li><li style="font-weight:400;"><span style="font-weight:400;">Cell and pack level battery testing<br><br></span></li><li style="font-weight:400;"><span style="font-weight:400;">Selection, testing, and validation of critical electrical components including connectors, cables, housings, fuses, adhesives, and coatings<br><br></span></li><li style="font-weight:400;"><span style="font-weight:400;">Root cause analysis of field or manufacturing issues<br><br></span></li><li style="font-weight:400;"><span style="font-weight:400;">Creation, revision control, and maintenance of detailed documentation sets<br><br></span></li></ul><p><strong>Preferred Qualifications:</strong></p><ul><li>4-7+ years of experience designing large, mass produced, HV battery pack assemblies for the aviation or automotive industry<br><br></li><li>Familiarity with automotive or aviation wiring harness standards, components, and best practices<br><br></li><li>Experience writing test plans, designing test infrastructure, and executing on test cards<br><br></li><li>Experience with any 3D CAD package (Solidworks, NX, Inventor, etc.)<br><br></li><li>An inquisitive attitude with an ability to quickly and deftly research new topics, try new things, and develop mastery of subjects<br><br></li><li>Excellent written and verbal communication skills. The ideal candidate is not afraid to ask for clarification or give feedback<br><br></li><li>Ability and excitement to be in a prototyping shop building things with your hands<br><br></li><li>Extreme attention to detail<br><span style="font-weight:400;"><br></span></li></ul><p><strong>Company Perks</strong></p><ul><li style="font-weight:400;"><span style="font-weight:400;">$130,000–$180,000 per year base salary + equity. Compensation will vary depending on location, job-related knowledge, skills, and experience. Salary ranges are subject to change.<br><br></span></li><li style="font-weight:400;"><span style="font-weight:400;">Employer-sponsored health, dental and vision insurance, FSA with employer matching, and 401(k)</span><span style="font-weight:400;"><br><br></span></li><li style="font-weight:400;"><span style="font-weight:400;">Paid time off, company holidays, and parental leave<br><br></span></li><li style="font-weight:400;"><span style="font-weight:400;">Free catered lunch and plenty of snacks<br><br></span></li></ul><p><strong>Export Control Requirements</strong></p><p>This position requires access to technology, software and other information that is subject to governmental access control restrictions, due to export controls.  Employment in this position is conditioned on the continued availability of government authorization to authorize release of such items, to the extent required, including without limitation an export license, or other documentation required to establish authorization to receive access to such items. </p><p>Company may delay commencement of employment, rescind an offer of employment, terminate employment, and/or may modify job responsibilities, compensation, benefits, and/or access to Company facilities and information systems, as Company deems appropriate, in order to ensure compliance with applicable government access control restrictions.</p><p>--<br><br></p><p>We do not work with external recruiters; if you are an external recruiter, please do not reach out.</p>

Revolutionizing transportation with autonomous electric aviation, Pyka builds game-changing products for a sustainable future.

Senior/Staff Mechanical Design Engineer, Battery Systems 

<p>Pyka is looking for an experienced reliability engineer to oversee the testing and validation of the aircraft’s subsystems.</p><p>You will oversee all aspects of hardware test/validation. On a day-to-day basis this will involve working with the mechanical design engineers to devise test plans and validation campaigns for their hardware. In addition, it will involve executing on those test plans with the help of test engineers, technicians, as well as design engineers.</p><p>Your work will have an enormous impact on the success of Pyka’s transition from prototype builds to serial production. In this role you will work directly with key decision makers at the company who will look to you to set the direction on a hardware test/validation. Your work will be prioritized and budgeted for. This will be a technically demanding position with enormous opportunity for ownership.<br><br></p><p><strong>About Pyka</strong></p><p>Pyka’s goal is to provide society with a new form of safe, clean, and cost-effective transportation enabled by autonomous electric aviation. <br><br>To get there, we’re taking a different approach than most. We're applying our technologies to every industry where autonomous electric aircraft can be useful, starting with the highest value and most dangerous jobs. In doing so, we're building game-changing products manufactured at scale, while perfecting the safety, reliability, and capabilities of our autonomy engine and electric propulsion systems. </p><p>We design, develop and manufacture an ecosystem of technologies including proprietary flight control software, avionics, high power density motors, motor controllers, batteries, and custom carbon-fiber composite airframes.</p><p>Today, we supply autonomous electric aircraft for cargo transport and crop protection to real-world customers across four separate continents and have secured industry-first regulatory approvals from the FAA. </p><p>Our cargo aircraft enables remote connectivity, enhances express delivery networks, and ensures fast and reliable shipping of critical supplies to areas in need. Our crop protection aircraft offers agricultural services providers and farmers an autonomous tool to make aerial application safer, more precise, and less harmful to surrounding environments. Both vehicles are highly economical to operate, easy to deploy, and significantly reduce C02 emissions in their respective industries. </p><p>What you work on at Pyka makes people’s lives better now and brings the future of electric aviation one step closer each day. <br><br></p><p><strong>Responsibilities</strong></p><ul><li>Work closely with the Pyka Mechanical Design team to efficiently validate the operating envelope and reliability/robustness of new designs as well as improve on existing designs based on in-field testing/bug reports.<br><br></li><li>Work with design engineers to devise and execute test plans for new designs. This will involve work in the shop/lab on test stands, as well as on the prototype and production fleets of aircraft.<br><br></li><li>Assess test coverage and create testing strategy<br><br></li><li>Work with all engineering orgs to root cause hardware issues that surface in the field from initial brainstorming to specific test campaigns to reproduce specific issues.<br><br></li><li>Define the standard for hardware validation processes and documentation.<br><br></li><li>Leverage your technical leadership expertise in hardware design and test to establish a team culture that biases toward action and tests ideas.<br><br></li><li>Use data to estimate system lifetime and reliability<br><br></li><li>Support the development of the hardware test team build-out (hiring/training).</li></ul><p>Note: This role will initially be an IC role with the opportunity to manage a team as the company grows.<br><br></p><p><strong>Preferred Qualifications</strong></p><ul><li>Bachelor’s Degree (or equivalent experience) with 6-8+ years of related work experience</li></ul><ul><li>Past experience working on production of a complex safety critical product (aviation, space, automotive, medical, etc.)</li></ul><ul><li>Extremely strong critical thinking skills and attention to subtle details of hardware<br><br></li><li>Extremely strong ability to devise accurate test campaigns and root cause complex and subtle issues<br><br></li><li>A hunger for data, and ability to collect and analyze data in order to accurately validate hypothesis<br><br></li><li>Strong hands-on skills and experience developing simple, robust test stands <br><br></li><li>Strong ability to work in a team environment with the ability to help and mentor team members<br><br></li><li>Experience working in a prototyping environment<br><br></li><li>Instrumentation and data acquisition skills<br><br></li></ul><p><strong>Company Perks</strong></p><ul><li>$130,000–190,000 per year base salary + equity. Compensation will vary depending on location, job-related knowledge, skills, and experience. Salary ranges are subject to change.<br><br></li><li>Employer-sponsored health, dental and vision insurance, FSA with employer matching, and 401(k)<br><br></li><li>Paid time off, company holidays, and parental leave<br><br></li><li>Free catered lunch and plenty of snacks<br><br></li></ul><p><strong>Export Control Requirements</strong></p><p>This position requires access to technology, software and other information that is subject to governmental access control restrictions, due to export controls.  Employment in this position is conditioned on the continued availability of government authorization to authorize release of such items, to the extent required, including without limitation an export license, or other documentation required to establish authorization to receive access to such items. </p><p>Company may delay commencement of employment, rescind an offer of employment, terminate employment, and/or may modify job responsibilities, compensation, benefits, and/or access to Company facilities and information systems, as Company deems appropriate, in order to ensure compliance with applicable government access control restrictions.<br><br>--</p><p>We do not work with external recruiters; if you are an external recruiter, please do not reach out.</p>

Senior/Staff Reliability Engineer

<p>Manufacturing Engineers are critical to the successful launch of new products and on-going design changes at Pyka! In this role, you’ll work on a blend of earlier stage prototypes as well as later-stage production parts and assemblies. You will help with the design, fabrication, and improvement of tools, jigs, and fixtures for both in-house and outsourced production. For outsourced composite assemblies, you will liaise between Pyka and the contract manufacturer to ensure all design changes and fixture updates are communicated clearly and implemented to our quality standards. You will also have the opportunity to help us define assembly cells and build out the airframe area of our new shop.<br><br></p><p><strong>About Pyka</strong></p><p>Pyka’s goal is to provide society with a new form of safe, clean, and cost-effective transportation enabled by autonomous electric aviation. <br><br>To get there, we’re taking a different approach than most. We're applying our technologies to every industry where autonomous electric aircraft can be useful, starting with the highest value and most dangerous jobs. In doing so, we're building game-changing products manufactured at scale, while perfecting the safety, reliability, and capabilities of our autonomy engine and electric propulsion systems. </p><p>We design, develop and manufacture an ecosystem of technologies including proprietary flight control software, avionics, high power density motors, motor controllers, batteries, and custom carbon-fiber composite airframes.</p><p>Today, we supply autonomous electric aircraft for cargo transport and crop protection to real-world customers across four separate continents and have secured industry-first regulatory approvals from the FAA. </p><p>Our cargo aircraft enables remote connectivity, enhances express delivery networks, and ensures fast and reliable shipping of critical supplies to areas in need. Our crop protection aircraft offers agricultural services providers and farmers an autonomous tool to make aerial application safer, more precise, and less harmful to surrounding environments. Both vehicles are highly economical to operate, easy to deploy, and significantly reduce C02 emissions in their respective industries. </p><p>What you work on at Pyka makes people’s lives better now and brings the future of electric aviation one step closer each day. <br><br></p><p><strong>Responsibilities</strong></p><ul><li>Work closely with Composite Prototyping Engineers, Manufacturing Engineers, and the Design Team to deliver composite prototype and production units on-time with the highest level of quality.<br><br></li><li>Translate composite prototype work into highly repeatable production processes.<br><br></li><li>Root-cause complex production issues that relate to process control, tooling, material variation, etc.<br><br></li><li>Support composite contract manufacturers from initial outsourcing through long term production to ensure Pyka’s knowledge transfer and quality standards are met and adhered to.<br><br></li><li>Work with Design Engineers to determine fabrication details, document manufacturing tolerances, and develop quality gates.<br><br></li><li>Create and maintain work instructions for production vehicle assembly.<br><br></li><li>Support composite modifications and retrofit projects in the US and at our international operations sites. <br><br></li><li>Maintain overall shop cleanliness and organization<br><br></li><li>Constantly work toward optimizing the design for production (DFM)<br><br></li><li>Design tooling, fixtures, templates, and work instructions to accurately and repeatedly manufacture parts and assemblies to required specifications.<br><br></li></ul><p><strong>Preferred Qualifications</strong><strong><br></strong></p><ul><li>B.S. Engineering with 6-8 years of related work experience in composite structures<br><br></li><li>Ability to work autonomously and in a team environment<br><br></li><li>Proficient in SolidWorks to realize CAD designs from their 3D format into repeatable, high quality products<br><br></li><li>Critical thinking skills to devise solutions to new problems<br><br></li><li>Deep familiarity with tooling used in the production of composite parts and assemblies<br><br></li><li>Deep familiarity with secondary bonded composite structures and bond preparation<br><br></li><li>Proficient in composite layup techniques (both prepreg and wet layup), drilling, trimming, installation of related hardware, usage of precision instruments, and utilization of hand tools to perform these tasks<br><br></li><li>Ability to find production efficiencies and create processes to meet them<br><br></li><li>Proficient use of Google Docs (Word, Excel, and PowerPoint)<br><br></li></ul><p><strong>Company Perks</strong><strong><br></strong></p><ul><li>$110,000–$175,000 per year base salary + competitive equity. Compensation will vary depending on location, job-related knowledge, skills, and experience. Salary ranges are subject to change.<br><br></li><li>Employer-sponsored health, dental and vision insurance<br><br></li><li>FSA with employer matching<br><br></li><li>401(k)<br><br></li><li>Paid holidays, generous PTO, and additional unpaid time off<br><br></li><li>Voluntary short-term disability, long-term disability, and life insurance<br><br></li><li>Pre-tax commuter benefits<br><br></li><li>Free catered lunch and plenty of snacks<br><br></li></ul><p></p><p><strong>Export Control Requirements</strong></p><p><span style="font-weight:400;">This position requires access to technology, software and other information that is subject to governmental access control restrictions, due to export controls.  Employment in this position is conditioned on the continued availability of government authorization to authorize release of such items, to the extent required, including without limitation an export license, or other documentation required to establish authorization to receive access to such items. </span></p><p><span style="font-weight:400;">Company may delay commencement of employment, rescind an offer of employment, terminate employment, and/or may modify job responsibilities, compensation, benefits, and/or access to Company facilities and information systems, as Company deems appropriate, in order to ensure compliance with applicable government access control restrictions.</span><span style="font-weight:400;"><br><br></span></p><p><span style="font-weight:400;">--</span></p><p><span style="font-weight:400;">We do not work with external recruiters; if you are an external recruiter, please do not reach out.</span></p>

Senior/Staff Manufacturing Engineer — Composite Airframe 

<div><p><span>A career at Lilium is for those who want to do something extraordinary</span><span>.</span><span> </span><span>We t</span><span>ake pride in pushing the </span><span>boundaries of </span><span>engineering, </span><span>technology and customer experience</span><span>. </span><span> </span></p><p><span>A</span><span>s </span><span>part of </span><span>a team, you</span><span> will</span><span> </span><span>tackle challenges</span><span> and</span><span> deliver something that has never been done before. </span><span>By joining Lilium you will have the opportunity to work with</span><span> </span><span>a</span><span> </span><span>world-class entrepreneurial team of more than  950</span><span> </span><span>people </span><span>who are  as passionate about </span><span>changing the world as you are. </span><span> </span></p><p><span>You will always act with safety and integrity in mind and embody our core behaviors of efficient and positive collaboration, ownership of time, continuous improvements and, ultimately delivering results.</span></p><p><span>We thrive on</span><span> </span><span>diversity </span><span>and</span><span> </span><span>creating an inclusive culture</span><span>, with more than 50 nationalities</span><span> currently</span><span> working </span><span>hard</span><span> </span><span>to bring our vision of a sustainable world to li</span><span>f</span><span>e.</span><span> </span></p></div><p><strong>Role and Interview process:</strong></p><p>The role is based in Munich, and Lilium supports relocation and visa sponsorship.</p><p>This role is a universal pool for multiple key jobs Lilium has in the Software Intensive Systems department.</p><p>After the first technical interview, we will align with you on the role's seniority and the system that you might be a good fit for. You will be able to choose from the following systems:</p><ul><li>Flight Controls (FCS)</li><li>Actuation and Motor Controls (MCU)</li><li>Software Platforms (BSP)</li></ul><p>Within 1 week from application, we will review your CV with a hiring team. In case of success, you will be invited for an interview or a technical case study.</p><p><strong>About Your Future Team:</strong></p><ul><li>The history of the team goes back to summer 2017 when the first several engineers joined Lilium. These enthusiastic and world-class experts had a strong vision about changing the aerospace and software development process. After 6 years, the majority of the first visionaries still stand with Lilium, demonstrating exceptional performance and progress. As a part of the hiring process, you will meet these people, so feel free to ask them about their personal journey.</li><li>Our Software team has more than 20 nationalities among its 60+ members. The average aerospace experience is 10+ years. Every year, at least 10% of the team members either get a promotion or have the ability to perform horizontal moves to obtain new skills and expertise.</li><li>We praise collaboration. The time in aerospace when there was a strong separation between "System" and "Software" is gone. Systems of modern aircraft have become more complex and advanced. We manage complexity by pushing Model-Based Design to new levels and letting Systems and Software Engineers work on the same models in a collaborative environment.</li></ul><p><strong>Your Tasks and Day-to-Day:</strong></p><ul><li>Develop and implement cutting-edge embedded systems solutions for our eVTOL aircraft, including requirements, architecture, and application-level software using model-based and traditional design practices.</li><li>Collaborate with cross-functional teams to define system and software requirements and ensure software is integrated with hardware components.</li><li>Optimize software performance for speed, memory usage, and power consumption, while adhering to strict safety and cyber-security standards.</li><li>Integrate controls software in hardware/software and system integration laboratories</li><li>Meet with certification authorities, support audits, and airworthiness cyber-security team.</li><li>Coordinate outsourcing packages and participate in supplier management activities.</li><li>Stay up to date with the latest developments in embedded software technology by participating in internal and external training programs.</li><li>Enjoy many after-work activities that Munich has to offer.</li></ul><p><strong>Your Profile:</strong></p><ul><li>7+ years of experience developing safety-critical embedded software in C.</li><li>Bachelor's or Master's degree in Embedded Systems Engineering, Electrical Engineering, Aerospace Engineering, or a related field.</li><li>Proficiency with model-based design using MATLAB Simulink / UML Enterprise Architect in the aerospace domain.</li><li>Knowledge of safety-critical software development practices, such as DO-178C and DO-331 in civil aerospace.<ul><li>Expertise in Systems engineering according to ARP4754A or cyber-security according to DO-326 is a strong plus.</li></ul></li><li>Familiarity with safety-critical microcontroller architectures, communication protocols, modern verification, and continuous integration concepts.</li><li>Understanding of systems/hardware/software co-design principles and experience working closely with safety, security, and quality teams within the aerospace environment.</li><li>Demonstrated experience and success in managing complex technical projects in the above-mentioned areas (FCS, MCU, BSP).</li><li>Excellent English communication skills, both verbal and written.</li></ul><p>This is an incredible opportunity to be at the forefront of a groundbreaking industry and work with a dynamic and innovative team. We offer competitive compensation packages, excellent benefits, and the chance to work with the latest tools and technologies in aerospace system engineering. If you have a passion for aerospace and eVTOL, and want to work on challenging and rewarding projects, apply today!</p><p>#LI-WK1</p><div><p><span>Want to know more? </span><span>Then view our </span><span>'<a href="https://lilium.com/careers">Why join Lilium</a></span><span>' </span><span>page!</span></p><p>Life at Lilium:</p><p>The wellbeing of our employees is a high priority. In our HQ we have many initiatives such as free healthy food and drinks, free in-house gym and health days. In remote offices we offer online opportunities to stay connected and develop yourself as well including our culture club, learning terminal, Employee Assistance Program and many more.</p><p> <em>Lilium is an equal opportunity employer and welcomes applications from all qualified individuals regardless of ethnicity, sex, disability, religion/belief, sexual orientation or age. </em> </p><p> </p><p> </p></div>

Aerospace Software Engineer (Middle/Senior/Principal)

<div>At Wisk, we're transforming the future of urban mobility through safe, all-electric, autonomous flight. We are a passionate team working together toward a sustainable future, solving high-impact problems that have never been solved before. By delivering everyday flight for everyone, we're making it possible to spend less time getting there and more time being there. If you want to be part of shaping the future of mobility, then read on!</div><div><br></div><div>We are looking for a Senior Staff Radar Engineer to join our team. The goal of a Senior Staff Radar Engineer at Wisk is to ensure the development and integration of advanced radar systems from conception to certification.  You will be part of the Conflict Detection and Resolution (CD&amp;R) team, which is part of the Avionics and Onboard Autonomy IPT. The CD&amp;R team is responsible for developing and certifying the conflict detection and resolution functionality, which includes traffic and terrain avoidance.</div><br><br><h3>Why we need you:</h3><ul><li>The successful candidate for this position is a subject matter expert in Radar design, Radio Frequency (RF) design and electronics with deep understanding of radar principles, waveform design, and signal processing algorithms. The ideal candidate would also have hands-on experience developing and building certified radar systems going from requirements to concepts and creating software and hardware prototypes, flight testing, and leading the radar technology development through a certification program. The ideal candidate would demonstrate strong oral and written communication skills and be able to work across team boundaries and at multiple boundaries. </li></ul><h3>Within 3 months you will:</h3><ul><li>Get to know key people on the team</li><li>Take on early development tasks to gain exposure to the project</li><li>Develop an understanding of the conflict detection and radar requirements</li><li>Build models and simulations to refine radar performance requirements</li></ul><h3>Within 6 months you will:</h3><ul><li>Conduct simulations and modeling to analyze radar system performance and optimize design parameters.</li><li>Create a conceptual design proposal outlining architecture and functionality of the radar system.</li></ul><h3>Within 12 months you will:</h3><ul><li>Continue to develop design and analysis tools</li><li>Develop prototype hardware and software for the integrated radar system</li><li>Demonstrate flight capability of the integrated radar system</li></ul><h3>What you have done:</h3><ul><li>At least 12 years in industry or academia developing RF systems such as radar, transceivers, antennas or other radar subsystems.</li><li>Bachelor’s degree in electrical engineering, physics, applied physics or related field. M.S. or Ph.D. preferred.</li><li>Demonstrated ability to analyze radar system requirements to perform trade studies on performance, size, power, and cost to develop RF solutions with an emphasis on designs for low SWaP requirements. </li><li>Ability to use RF simulation tools, design and build prototypes, and iterate over the physical design to achieve the desired system requirements.</li><li>Broad software and laboratory skills for RF data acquisition, analysis, modeling and simulation. This includes instruments such as Vector Network Analyzers, Oscilloscopes, Spectrum Analyzers, Signal Generators, etc. and software tools such as MATLAB, Simulink, Python, LTspice, Keysight ADS, etc. </li><li>Deep understanding and experience with Digital Signal Processing (DSP) algorithms. </li><li>Demonstrated experience building plans and executing on prototype radar test programs to verify applicable system requirements. </li><li>Analyze simulation, ground, and flight test data to determine if the proposed design meets functional and performance requirements.</li><li>Mentor and provide guidance to other RF, DSP, mechanical and system engineers. </li></ul><h3>Desired:</h3><ul><li>Experience hiring, building and leading a multidisciplinary team while working for a radar development program. </li><li>Past experience with autonomous vehicles and/or airborne RF applications is a plus.</li><li>Demonstrated subject matter expertise in both systems integration and system engineering activities. </li><li>Demonstrated experience of taking radar development through FAA and/or EASA certification.</li><li>Knowledge DO-160, DO-178C, and applicable FCC compliance regulations. </li></ul><h3>Who you are:</h3><ul><li>You are a highly motivated, self starting individual with a broad set of skills and never afraid of facing complex technical challenges</li><li>You are a solution oriented individual with a strong analytical mindset</li><li>You have strong communication skills and can easily tailor your communications to suit the audience</li><li>You can adapt quickly or propose changes needed to achieve early results in a timely fashion</li><li>You embrace challenges and take commitments and deliver results within reasonable expectations</li><li>You are a positive team player</li></ul><br><div>We are located in Mountain View just a couple of hundred feet from Shoreline Lake and its surrounding walking/jogging trails. We offer a comprehensive benefits package including medical, dental, vision and life insurance, alternative work schedule (9/80), flexible time off, 11 company holidays, a 401(k) plan with 50% company matching vested immediately, commuter assistance, and education assistance. And on top of all that, we also offer a variety of perks such as free catered lunches, flight lessons, wellness allowances, snacks, drinks, fruit, employee referral bonus, charitable giving match, patent bonus program, happy hours and much more.</div><div><br></div><div>Wisk Aero provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Wisk Aero abides by applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.</div><div><br></div><div>Wisk Aero is an E-Verify employer. </div>

Senior Staff Radar Engineer

<div>At Wisk, we're transforming the future of urban mobility through safe, all-electric, autonomous flight. We are a passionate team working together toward a sustainable future, solving high-impact problems that have never been solved before. By delivering everyday flight for everyone, we're making it possible to spend less time getting there and more time being there. If you want to be part of shaping the future of mobility, then read on!</div><div><br></div><div>We are looking for a Flight Test Instrumentation Engineer with experience instrumenting complex aircraft and aerospace systems to join us in testing and certifying a new class of all-electric personal aircraft.     </div><br><br><h3>Why we need you:</h3><ul><li>As a member of the Flight Test and Operations team, you will be working closely with Certification, Systems Engineering, and cognizant engineers from Avionics, Electric Propulsion, Structural, Aerodynamics, and Controls teams to validate and verify a revolutionary new aircraft design. </li><li>Your role will involve interpreting certification requirements, identifying applicable industry guidance, and applying your knowledge of Wisk’s flight test instrumentation to show compliance to the certification authority. Leveraging your experience, you will develop installations, methods, and systems to demonstrate our Generation 6 aircraft meets the certification requirements. </li><li>You will support test program scheduling, participate in test execution, and ensure flight test data is accurate and complete.  You will mentor other flight test personnel on current industry practices for flight test instrumentation and support writing updates to company Standard Operating Procedures.</li></ul><h3>What you will do:</h3><ul><li>Design and integrate a data collection system onto a novel fixed wing aircraft with multiple bespoke vertical and tilting forward thrust propellers and a bespoke electrical power system</li><li>Integration of sensors to include include strain gauges, accelerometers, temperature sensors, bus data taps, position measurement, cameras, microphones, and more</li><li>Instrument systems that include avionics, rotating frame, fixed frame, telemetry, pitot-statics</li><li>Continued support of a Flight Test Ground Control Station to support aircraft telemetry streams</li><li>Work with system and design engineering to achieve test data requirements on flight test assets</li><li>Identify appropriate third party components and materials to define the system and lead the decision process for final component selection</li><li>Obtain quotes and and facilitate the ordering of system components </li><li>Define manufacturing and instrumentation processes / technologies</li><li>Support design engineers developing electrical wiring schematics, mounting provisions, and other new components</li><li>Provide engineering support to Flight Test  Instrumentation Technicians during fabrication, integration, modification, setup, and checkout</li><li>Obtaining flight clearances from the customer for installed configurations, defining methods for internal flight clearances</li><li>Troubleshooting and resolving instrumentation system, transducer, and test-related problems</li><li>Analyze, review, and validate test data to ensure flight test instrumentation hardware and software readiness</li><li>Interface with project / program team members and management</li><li>Work under general direction and train other Flight Test teammates to assist in these roles</li></ul><h3>What you have done:</h3><ul><li>Bachelor, Master, or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, or physics.</li><li>This position has responsibility to build and monitor color coded safety analysis displays to support real time test missions. Candidates are required to be able to accurately differentiate between Red/Orange/Yellow/Green/Blue etc colors for safety of flight and safety of test displays during real time flight test missions</li><li>3 or more years of related work experience or an equivalent combination of education and experience</li><li>Proficiency in data analysis with MATLAB, Python, or other scripting tools</li><li>Familiarity with the aircraft development process and planning documents of ARP4754A/ ED-79A</li><li>Demonstrated ability to lead teams and manage tasks to successful completion in challenging cross functional environments</li><li>Experience managing deficiencies, limitations and restrictions in a flight test environment</li></ul><h3>Desired: </h3><ul><li>Bachelor’s degree or higher in Electrical, Mechanical, or Aerospace Engineering </li><li>Certification flight test experience</li><li>3+ years of experience designing special test equipment for flight programs and supporting proposals </li><li>Proficiency with NX, JIRA and TeamCenter</li><li>3+ years of experience with precision test and measurement devices </li><li>3+ years of experience with flight test, flight operations, or system test</li></ul><h3>Who you are:</h3><ul><li>You are a highly motivated, self starting individual with a broad set of skills and never afraid of facing complex technical challenges</li><li>You are a solution oriented individual with a strong analytical mindset</li><li>You have strong communication skills and can easily tailor your communications to suit the audience</li><li>You can adapt quickly or propose changes needed to achieve early results in a timely fashion</li><li>You embrace challenges and take commitments and deliver results within reasonable expectations</li><li>You are a positive team player</li></ul><br><div>We are located in Mountain View just a couple of hundred feet from Shoreline Lake and its surrounding walking/jogging trails. We offer a comprehensive benefits package including medical, dental, vision and life insurance, alternative work schedule (9/80), flexible time off, 11 company holidays, a 401(k) plan with 50% company matching vested immediately, commuter assistance, and education assistance. And on top of all that, we also offer a variety of perks such as free catered lunches, flight lessons, wellness allowances, snacks, drinks, fruit, employee referral bonus, charitable giving match, patent bonus program, happy hours and much more.</div><div><br></div><div>Wisk Aero provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Wisk Aero abides by applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.</div><div><br></div><div>Wisk Aero is an E-Verify employer. </div>

Senior Instrumentation Engineer

<div>POSTULER À CET EMPLOI Chez Wisk, nous transformons l'avenir de la mobilité urbaine en proposant des vols sécuritaires, entièrement électriques et autonomes. Nous sommes une équipe passionnée qui travaille ensemble pour un avenir durable, en résolvant des problèmes à fort impact qui n'ont jamais été résolus auparavant. En proposant des vols quotidiens à portée de tous, nous faisons en sorte qu'il soit possible de passer moins de temps dans les transports et plus de temps à profiter. Si vous voulez faire partie du futur de la mobilité, poursuivez la lecture!</div><div><br></div><div>At Wisk, we're transforming the future of urban mobility through safe, all-electric, autonomous flight. We are a passionate team working together toward a sustainable future, solving high-impact problems that have never been solved before. By delivering everyday flight for everyone, we're making it possible to spend less time getting there and more time being there. If you want to be part of shaping the future of mobility, then read on!</div><div><br></div><div>Nous recherchons un professionnel senior qualifié en ingénierie électrique qui jouera un rôle clé dans la conception, le développement et l’intégration de systèmes électroniques et électriques pour les systèmes de cabine et de passagers de Wisk. Le candidat retenu collaborera avec des équipes interfonctionnelles pour s’assurer que nos systèmes de cabine répondent aux normes les plus élevées en matière de sécurité, de fiabilité et de fonctionnalité.</div><div><br></div><div><b>Ce pourquoi nous avons besoin de vous</b></div><div><br></div><div>En tant que professionnel senior en ingénierie électrique, vous jouerez un rôle crucial dans le succès du développement de la cabine de l’aéronef Wisk. Spécialisé dans la conception, le développement, l’intégration et l’entretien de systèmes électriques de cabines d’avion, vous assurerez le fonctionnement harmonieux des systèmes de communication, d’éclairage, de connectivité et de contrôle environnemental. Votre responsabilité est de garantir la sécurité de la cabine et sa conformité réglementaire tout en assurant la meilleure expérience aux passagers. Dans le paysage évolutif de l’aviation, vous serez indispensable pour façonner l’avenir des intérieurs d’aéronefs, améliorer l’expérience des passagers et respecter les normes les plus élevées en matière de fiabilité et d’innovation.</div><div><br></div><div>We are looking for a skilled Senior Electrical Engineer to play a key role in the design, development, and integration of electronic and electrical systems for Wisk’s cabin and passenger systems. The successful candidate will collaborate with cross-functional teams to ensure that our cabin systems meet the highest standards of safety, reliability, and functionality.</div><div><br></div><div><b>Why we need you </b></div><div><br></div><div>As a Senior Electrical Engineer, you will play a crucial role in the success of development of Wisk Aircraft’s Cabin. Specializing in designing, developing, integrating, and maintaining aircraft cabin electrical systems, you ensure the seamless operation of communications, lighting, connectivity and environmental control systems. Your responsibility is to guarantee cabin safety and regulatory compliance, while ensuring the best passenger experience. In the evolving landscape of aviation, you will be indispensable in shaping the future of aircraft interiors, enhancing passenger experience, and upholding the highest standards of reliability and innovation.</div><br><br><h3>Ce que vous ferez (What you will do):</h3><ul><li>Développer et concevoir des systèmes électriques et des composants pour les cabines de transport aérien, y compris les systèmes de distribution d’énergie, d’éclairage, audio, vidéo, de communication  et d’autres équipements de cabine.</li><li>Collaborer avec les ingénieurs système, les équipes interfonctionnelles et les fournisseurs pour définir  les exigences relatives aux systèmes électroniques et électriques et aux composants.</li><li>Analyser et traduire les exigences en une architecture de système complète, des interfaces et du matériel en collaboration avec des équipes interdisciplinaires et des fournisseurs, afin d’assurer la compatibilité avec les systèmes avioniques et autres systèmes d’aéronefs.</li><li>Définir des ensembles de communication de données conformes aux protocoles de communication aérospatiale (RS-232/422/485, ARINC429, IEEE 802.3, ARINC664, ARINC825)</li><li>Créer et tenir à jour une documentation complète, y compris des schémas, des diagrammes, des spécifications techniques, des rapports de qualification, des plans d’essai et des résultats pour appuyer la fabrication et l’installation de systèmes électriques de cabine.</li><li>Rester informé des normes et des règlements de l’industrie liés aux systèmes électriques des cabines passagers en veillant à la conformité avec les autorités de certification  pertinentes.</li><li>Dépanner et résoudre les problèmes électriques pendant les phases de développement, d’essai et d’exploitation des systèmes de cabine. </li><li>Élaborer et documenter les spécifications d’interface (signaux, données et puissance) pour les systèmes électroniques et électriques.</li><li>Examiner et approuver la documentation technique, comme les plans d’essai, les essais de qualification et les résultats, la documentation de conception et les plans de mise en œuvre.</li><li>Diriger et exécuter des essais pour valider les composants matériels et logiciels en veillant à ce qu’ils répondent aux exigences environnementales, opérationnelles et fonctionnelles.</li><li>Participer aux essais au sol et en vol sur l’aéronef commercial de Wisk, au besoin.</li><li>Surveiller le rendement des fournisseurs pour assurer l’intégration du système et la conformité aux exigences opérationnelles et fonctionnelles.</li><li>Soutenir les problèmes matériels tout au long du cycle de vie du produit en offrant des solutions novatrices aux problèmes.</li><li>Rester à jour avec les dernières avancées technologiques et faire des recherches sur les technologies novatrices qui peuvent être appliquées pour répondre aux besoins commerciaux de Wisk.</li><div><br></div><li>Develop and design electrical systems and components for air transportation cabins, including power distribution, lighting, audio, video and communication  systems, and other cabin amenities.</li><li>Collaborate with Systems Engineers, cross functional teams and suppliers to define  electronic and electrical system/component requirements.</li><li>Analyze and translate requirements into comprehensive system architecture, interfaces and hardware in collaboration with interdisciplinary teams and suppliers, ensuring compatibility with avionics and other aircraft systems.</li><li>Define data communication packages adhering to aerospace communication protocols (RS-232/422/485, ARINC429, IEEE 802.3, ARINC664, ARINC825)</li><li>Create and maintain comprehensive documentation, including schematics, diagrams, technical specifications, qualification reports, test plans and results to support the manufacturing and installation of cabin electrical systems.</li><li>Stay informed about industry standards and regulations related to passenger cabin electrical systems, ensuring compliance with relevant certification  authorities.</li><li>Troubleshoot and resolve electrical issues during the development, testing, and operational phases of cabin systems. </li><li>Develop and document interface specifications (signals, data and power) for electronic and electrical systems.</li><li>Review and approve engineering documentation such as test plans, qualification tests and results, design documentation and implementation plans.</li><li>Lead and execute tests to validate hardware and software components, ensuring they meet environmental, operational and functional requirements.</li><li>Participate in ground and flight tests on Wisk's Commercial aircraft when required.</li><li>Monitors supplier performance to ensure system integration and compliance with operational and functional requirements.</li><li>Support hardware issues over the entire product lifecycle, offering innovative solutions to problems.</li><li>Stay updated with the latest technological advancements and research innovative technologies that can be applied to address Wisk's business needs.</li></ul><h3>Votre parcours (What you have done):</h3><ul><li>Baccalauréat en génie électrique ou dans un domaine connexe.</li><li>Plus de 5 ans d’expérience dans le développement et la conception de systèmes électroniques et électriques (E/E).</li><li>Connaissance des normes E/E.</li><li>Expérience avérée des essais et de la validation de systèmes, y compris les essais d’intégration en laboratoire et la participation à des essais au sol et en vol.</li><li>Solides compétences en dépannage et en résolution de problèmes dans le matériel et les logiciels.</li><li>Excellentes compétences en communication et en collaboration pour travailler avec les clients, les fournisseurs et les équipes interfonctionnelles.</li><li>Engagement à se tenir au courant des technologies émergentes et de leurs applications potentielles.</li><div><br></div><li>Bachelor's degree in Electrical Engineering or a related field.</li><li>5+ years of experience in developing and designing electronic and electrical systems (E/E).</li><li>Knowledge of E/E Standards.</li><li>Proven experience in system testing and validation, including laboratory integration testing and participation in ground and flight tests.</li><li>Strong troubleshooting and problem-solving skills in hardware and software.</li><li>Excellent communication and collaboration skills for working with customers, suppliers, and cross-functional teams.</li><li>Commitment to staying current with emerging technologies and their potential applications.</li></ul><h3>Désiré (Desired):</h3><ul><li>Maîtrise ou doctorat en génie électrique (ou dans un domaine connexe)</li><li>Familiarité et compréhension des pratiques recommandées pour l’aérospatiale ARP 4754 et ARP 4761, et vous avez de l’expérience dans l’analyse de la sécurité telle que FHA, SSA, CCA, PRA.</li><li>Connaissance des normes de certification des logiciels et du matériel (DO-178C, DO-254, DO-160)</li><li>Vous disposez de connaissances en matière de conception de bus et de réseaux de communication (RS-232/422/485, ARINC429, IEEE 802.3, ARINC664, ARINC825), d’une bonne connaissance des protocoles connexes, de la couche physique à la couche application (suite de protocoles Internet, algorithmes d’intégrité et d’authentification), et de la capacité d’analyser et de développer de nouveaux protocoles de la couche hôte.</li><li>Connaissance des normes de l’industrie et des règlements FAA liés aux systèmes aérospatiaux et automobiles</li><div><br></div><li>MS or PhD in Electrical (or related field) engineering degree</li><li>Familiarity and understanding of Aerospace Recommended Practices ARP 4754 and ARP 4761, and have experience with safety analysis such as FHA, SSA, CCA, PRA.</li><li>Familiarity with software and hardware certification standards (DO-178C, DO-254, DO-160)</li><li>You have design knowledge of communication buses and networks (RS-232/422/485, ARINC429, IEEE 802.3, ARINC664, ARINC825), familiarity with related protocols from physical to application layer (Internet protocol suite, integrity and authentication algorithms), and capability to analyze and develop new host-layer protocols.</li><li>Knowledge of industry standards and FAA regulations related to aerospace and automotive systems.</li></ul><h3>Votre profil (Who you are):</h3><ul><li>Vous êtes un individu hautement motivé doté d’esprit d’initiative et disposant d’une vaste gamme de compétences et vous ne craignez jamais d’être confronté à des défis techniques complexes</li><li>Vous êtes une personne orientée vers la solution et dotée d’un fort esprit analytique.</li><li>Vous disposez de solides aptitudes à la communication et pouvez facilement adapter vos communications au public visé</li><li>Vous vous adaptez rapidement ou proposez les changements nécessaires pour obtenir des résultats rapides dans des délais opportuns</li><li>Vous relevez des défis, prenez des engagements et livrez des résultats correspondant à des attentes raisonnables</li><li>Vous avez un esprit d’équipe positif</li><div><br></div><li>You are a highly motivated, self starting individual with a broad set of skills and never afraid of facing complex technical challenges</li><li>You are a solution oriented individual with a strong analytical mindset</li><li>You have strong communication skills and can easily tailor your communications to suit the audience</li><li>You can adapt quickly or propose changes needed to achieve early results in a timely fashion</li><li>You embrace challenges and take commitments and deliver results within reasonable expectations</li><li>You are a positive team player</li></ul><br><div><span style="font-size:11pt;">Nous proposons un ensemble complet d'avantages sociaux incluant une couverture médicale, dentaire, de la vue et une assurance vie (l'entreprise assume la totalité de la prime du salarié), une structure d'horaire de travail à disposition (9/80), ainsi que 20 jours de congé payés et 10 jours fériés. Nous mettons aussi en place un régime de retraite épargne avec une contribution équivalente de 100% de l'entreprise, pouvant atteindre jusqu'à 8%, ainsi qu'une aide financière pour les études. Et en plus de tout cela, nous offrons également une variété d'avantages tels que des cours de vol, des allocations de bien-être, des collations, des boissons, des fruits, des bonus de référence d'employés, un programme de dons de bienfaisance assortis, un programme de bonus de brevet, et bien plus encore.</span></div><div><br></div><div><span style="font-size:11pt;">We offer a comprehensive benefits package including medical, dental, vision and life insurance (company pays 100% of employee premium), alternative work schedule (9/80), 20 days of PTO, 10 company holidays, a retirement savings plan with 100% company matching up to 8% and education assistance. And on top of all that, we also offer a variety of perks such as flight lessons, wellness allowances, snacks, drinks, fruit, employee referral bonus, charitable giving match, patent bonus program, and much more.</span></div><div><br></div><div><span style="font-size:11pt;">Wisk Aero offre des égalités d'emplois (EEO) à tous les employés et candidats à l'emploi, sans distinction de race, de couleur, de religion, de sexe, d'origine ethnique ou nationale, d'âge, de handicap, d'identité ou d'expression de genre, de grossesse, d'orientation sexuelle, d'état civil, de convictions politiques, de langue, de condition sociale ou d'autres caractéristiques protégées. En plus des obligations imposées par les lois fédérales, Wisk Aero se conforme aux lois provinciales et locales applicables en matière de non-discrimination en matière d'emploi dans tous les endroits où l'entreprise compte des installations. Cette politique s'applique à toutes les modalités et conditions d'emploi, incluant le recrutement, l'embauche, le placement, la promotion, la cessation d'emploi, la mise à pied, la réintégration, la mutation, les congés, la rémunération et la formation.</span></div><div><br></div><div><span style="font-size:11pt;">Wisk Aero provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, colour, religion, sex, ethnic or national origin, age, disability/handicap, gender identity or expression, pregnancy, sexual orientation, civil status, political convictions, language, social condition, or any other protected characteristics. In addition to federal law requirements, Wisk Aero abides by applicable provincial and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.</span></div><div><br></div><div><span style="font-size:11pt;">Veuillez soumettre tous les CV en anglais</span></div><div><br></div><div><span style="font-size:11pt;">Please submit all resumes in English</span></div>

Senior Electrical Engineer / Professionnel senior en ingénierie électrique

<div>At Wisk, we're transforming the future of urban mobility through safe, all-electric, autonomous flight. We are a passionate team working together toward a sustainable future, solving high-impact problems that have never been solved before. By delivering everyday flight for everyone, we're making it possible to spend less time getting there and more time being there. If you want to be part of shaping the future of mobility, then read on!</div><br><br><h3>Why we need you:</h3><ul><li>With that vision in mind, we are looking for a Liaison Engineer to join our Engineering team. The goal at Wisk is to build the first fully autonomous all-electric aircraft that performs and operates safely in an urban air-mobility environment. In support of this goal, you will apply knowledge of solid design principles to assess and resolve product/process issues through the product lifecycle. Analyze, conduct root cause analysis and develop dispositions for design non-conformances.</li><li>You will apply engineering principles to research technical, operational and quality issues and design interim and final engineering solutions. You will identify documents, analyze reported problems and communicate deviations that could impact design intent and safety; recommend and manage resolution. Develop and implement product/process improvements.</li><li>The successful candidate is an engineering generalist.  You will draw from a broad experience with all systems of the aircraft including, but not limited to Structures, Propulsion, Avionics, Electrical Power systems, Flight Controls, Passenger systems…etc.   In this role, the candidate must be proactive, forward thinking and self-motivated with the ability to inspire and lead by influence a team of like-minded engineers. This person must be a team player and willing to find actionable paths forward between differing viewpoints and priorities. </li></ul><h3>What you will do:</h3><ul><li>Resolve complex engineering problems related to the build of the aircraft.</li><li>Review defects and establish root cause</li><li>Review Engineering documentation (drawings, test procedures, and discrepancy tags) to enable technicians to understand the documents and continue working.</li><li>Review, develop, and implement revised/new processes </li><li>Provide an acceptable disposition of non-conformance of commercial mechanical systems encountered during Manufacturing/Assembly process and production, including reporting of failures, malfunctions, and defects.</li><li>Document how to resolve the discrepancy using engineering principles.</li><li>Assist in determining if defects are Engineering related or workmanship issues. Documents defect findings.</li><li>Ensures that the proposed disposition is equivalent to the Blueprint design or will not affect systems functionality.</li><li>Provide feedback, guidance and support to Hardware Engineering in regards to repeat engineering issues or component failures.</li><li>Incorporate design changes using Siemens NX.</li></ul><h3>What you have done:</h3><ul><li>A Bachelor degree in Science, Technology, Engineering or Math (STEM Degree) and a minimum of 10 years of relevant professional or Military experience or a MS degree in Science, Technology, Engineering or Math (STEM Degree) and 8 years of relevant Professional / Military experience.</li><li>Knowledge of the MRB process / experience with the MRB process</li><li>Experience with Siemens NX, Catia, or other CAD programs,  </li><li>Experience working with PLM and MES systems.</li><li>Proficient with a wide variety of electronic and mechanical technologies, including assembly and joining processes</li><li>Proficient and safe use of hand and shop tools</li><li>Proficient with drafting standards/GD&amp;T</li><li>You have personally created engineering drawings, schematics or other design documentation.</li><li>You have engaged with the FAA or an associated delegate in a Liaison, MRB or Sustainment capacity</li></ul><h3>Desired:</h3><ul><li>Advanced degree in Mechanical Engineering, Electrical Engineering  or Aerospace Engineering</li><li>Six Sigma or LEAN manufacturing experience/certification</li><li>Experience working with TeamCenter and OpCenter</li></ul><h3>Who you are:</h3><ul><li>You are a highly motivated, self starting individual with a broad set of skills and never afraid of facing complex technical challenges</li><li>You are a solution oriented individual with a strong analytical mindset</li><li>You have strong communication skills and can easily tailor your communications to suit the audience</li><li>You can adapt quickly or propose changes needed to achieve early results in a timely fashion</li><li>You embrace challenges and take commitments and deliver results within reasonable expectations</li><li>You are a positive team player</li></ul><br><div>We are located in Mountain View just a couple of hundred feet from Shoreline Lake and its surrounding walking/jogging trails. We offer a comprehensive benefits package including medical, dental, vision and life insurance, alternative work schedule (9/80), flexible time off, 11 company holidays, a 401(k) plan with 50% company matching vested immediately, commuter assistance, and education assistance. And on top of all that, we also offer a variety of perks such as free catered lunches, flight lessons, wellness allowances, snacks, drinks, fruit, employee referral bonus, charitable giving match, patent bonus program, happy hours and much more.</div><div><br></div><div>Wisk Aero provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Wisk Aero abides by applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.</div><div><br></div><div>Wisk Aero is an E-Verify employer. </div>

Senior Staff Liaison Engineer

<p>Pyka is seeking a talented Senior Electrical Assembly Technician to join our team as we revolutionize autonomous electric aircrafts. Your expertise will play a critical role in assembling the intricate electrical subsystems in our aircraft. You’ll face exciting challenges as you help build first iteration hardware and have the immense satisfaction of seeing your work take flight. In this dynamic role, you’ll work closely with engineers to refine and productionize assemblies ensuring precision and reliability.</p><p><strong><br>About Pyka</strong></p><p>Pyka’s goal is to provide society with a new form of safe, clean, and cost-effective transportation enabled by autonomous electric aviation. <br><br>To get there, we’re taking a different approach than most. We're applying our technologies to every industry where autonomous electric aircraft can be useful, starting with the highest value and most dangerous jobs. In doing so, we're building game-changing products manufactured at scale, while perfecting the safety, reliability, and capabilities of our autonomy engine and electric propulsion systems. </p><p>We design, develop and manufacture an ecosystem of technologies including proprietary flight control software, avionics, high power density motors, motor controllers, batteries, and custom carbon-fiber composite airframes.</p><p>Today, we supply autonomous electric aircraft for cargo transport and crop protection to real-world customers across four separate continents and have secured industry-first regulatory approvals from the FAA. </p><p>Our cargo aircraft enables remote connectivity, enhances express delivery networks, and ensures fast and reliable shipping of critical supplies to areas in need. Our crop protection aircraft offers agricultural services providers and farmers an autonomous tool to make aerial application safer, more precise, and less harmful to surrounding environments. Both vehicles are highly economical to operate, easy to deploy, and significantly reduce C02 emissions in their respective industries. </p><p>What you work on at Pyka makes people’s lives better now and brings the future of electric aviation one step closer each day. <br><br></p><p><strong>Responsibilities</strong></p><ul><li>Perform and establish incoming quality checks on production material<br><br></li><li>Work with design engineers on first articles and help move subassembly to production<br><br></li><li>Assemble electrical/mechanical subsystems following work instructions<br><br></li><li>Perform quality checks on assemblies as they go through the production process<br><br></li><li>Subassembly inventory tracking and procurement<br><br></li><li>Build wire harnesses and test setups based on understandings of Pyka’s systems<br><br></li><li>Write and update work instructions in our MES<br><br></li><li>Help to solve bugs and quality issues during assembly<br><br></li><li>Maintain the production space and keep equipment operational and orderly<br><br></li><li>Be comfortable and safe working with batteries, high voltage, and spinning motors<br><br></li></ul><p><strong>Preferred Qualifications</strong></p><ul><li>4-10+ years of experience with electrical/mechanical assemblies and building wiring harnesses based on schematics and work instructions<br><br></li><li>Experience with MES, PLM, and ERP<br><br></li><li>Experience writing and modifying work instructions<br><br></li><li>High voltage safety knowledge and comfortable working on 120 VDC, 20 ~ 30 kW systems.<br><br></li><li>Ability to follow instructions, both written and verbal, to carefully assemble electronic subsystems containing a variety of electrical and mechanical components<br><br></li><li>Experience inspecting and ensuring quality of electrical subsystems<br><br></li><li>Excellent written and verbal communication skills. The ideal candidate is not afraid to ask for clarification or give feedback<br><br></li><li>Detail oriented documentation skills (writing procedures/ documenting test results)<br><span style="font-weight:400;"><br></span></li></ul><p><strong>Company Perks</strong></p><ul><li style="font-weight:400;"><span style="font-weight:400;">$75,000–$105,000 per year base salary + equity. Compensation will vary depending on location, job-related knowledge, skills, and experience. Salary ranges are subject to change.</span><span style="font-weight:400;"><br><br></span></li><li>Employer-sponsored health, dental and vision insurance<br><br></li><li>FSA with employer matching<br><br></li><li>401(k)<br><br></li><li>Paid holidays, generous PTO, and additional unpaid time off<br><br></li><li>Voluntary short-term disability, long-term disability, and life insurance<br><br></li><li>Pre-tax commuter benefits<br><br></li><li>Free catered lunch and plenty of snacks<br><span style="font-weight:400;"><br></span></li></ul><p><strong>Export Control Requirements</strong></p><p><span style="font-weight:400;">This position requires access to technology, software and other information that is subject to governmental access control restrictions, due to export controls.  Employment in this position is conditioned on the continued availability of government authorization to authorize release of such items, to the extent required, including without limitation an export license, or other documentation required to establish authorization to receive access to such items. </span></p><p><span style="font-weight:400;">Company may delay commencement of employment, rescind an offer of employment, terminate employment, and/or may modify job responsibilities, compensation, benefits, and/or access to Company facilities and information systems, as Company deems appropriate, in order to ensure compliance with applicable government access control restrictions.</span><span style="font-weight:400;"><br><br></span></p><p><span style="font-weight:400;">--</span></p><p><span style="font-weight:400;">We do not work with external recruiters; if you are an external recruiter, please do not reach out.</span></p>

Senior Electrical Assembly Technician

<div><p><span>A career at Lilium is for those who want to do something extraordinary</span><span>.</span><span> </span><span>We t</span><span>ake pride in pushing the </span><span>boundaries of </span><span>engineering, </span><span>technology and customer experience</span><span>. </span><span> </span></p><p><span>A</span><span>s </span><span>part of </span><span>a team, you</span><span> will</span><span> </span><span>tackle challenges</span><span> and</span><span> deliver something that has never been done before. </span><span>By joining Lilium you will have the opportunity to work with</span><span> </span><span>a</span><span> </span><span>world-class entrepreneurial team of more than  950</span><span> </span><span>people </span><span>who are  as passionate about </span><span>changing the world as you are. </span><span> </span></p><p><span>You will always act with safety and integrity in mind and embody our core behaviors of efficient and positive collaboration, ownership of time, continuous improvements and, ultimately delivering results.</span></p><p><span>We thrive on</span><span> </span><span>diversity </span><span>and</span><span> </span><span>creating an inclusive culture</span><span>, with more than 50 nationalities</span><span> currently</span><span> working </span><span>hard</span><span> </span><span>to bring our vision of a sustainable world to li</span><span>f</span><span>e.</span><span> </span></p></div><p><strong><span>Your role and your team:</span></strong><span> </span></p><p><span>As a senior engineering lead, you'll have the opportunity to work on cutting-edge eVTOL aerospace project, ensuring the quality, safety and security of our software systems through rigorous model-based design and verification. You'll work with a team of highly skilled engineers to create and maintain robust software for the airborne battery management systems and to execute those plans using state-of-the-art tools and techniques.</span><span> </span></p><p><span>We're looking for someone with a strong leadership skills, extensive experience in software development, verification and certification, with a focus on model-based design and battery management systems. You should have a deep understanding of system and software lifecycle and be able to apply that knowledge to complex aerospace projects. You'll also need to be an excellent communicator, able to work effectively with cross-functional teams and stakeholders.</span><span> </span></p><p><span>The position requires someone with a strong software certification and project management background. In this role you will coordinate system certification, development and verification activities as well as collaboration with external suppliers and regulatory authorities.</span><span> </span></p><p><strong><span>Your Day to Day:</span></strong><span> </span></p><p><span>Lead software projects activities including, but not limited to:</span><span> </span></p><ul><li><span>Guide development strategy for airborne safety-critical embedded software in accordance with the applicable aerospace regulations</span><span> </span></li><li><span>Provide leadership and guidance to a team of software and system engineers, helping them design, develop, and deliver high-quality software solutions.</span><span> </span></li><li><span>Generate plans, standards, guidelines, methods related to software products</span><span> </span></li><li><span>Own software airborne software lifecycle data and act as Designated Certification Specialists in the area of Energy/Power Systems of the eVTOL aircraft.</span><span> </span></li><li><span>Participate in cross-functional activities with other relevant stakeholders (systems, safety, security, airworthiness, design assurance, etc.) </span><span> </span></li><li><span>Prepare and coordinate work with external suppliers as well as teams inside Lilium.</span><span> </span></li></ul><p><strong><span>Your Profile:</span></strong><span> </span></p><ul><li><span>B.Sc/M.Sc/M.Eng in Computer Engineering, Software Engineering or Electronic Engineering.</span><span> </span></li><li><span>Experience and success in managing complex aerospace software projects till successful certification and Entry into Service.</span></li><li><span><span>Demonstrated experience </span>in building and leading small-/mid-size high-performance teams.</span></li><li><span>Expert knowledge of DO-178C, DO-331 is mandatory, ARP4754A is a plus.</span><span> </span></li><li><span>Hands-on experience in MATLAB/Simulink and C is mandatory, UML for software architectures is a strong plus.</span><span> </span></li><li><span>Experience with cutting-edge Electrical Power Systems (ATA24), Integrated Modular Avionics (ATA42) or Battery Technologies is a plus.</span><span> </span></li><li><span>Interests in Cyber Security, Quality Assurance, Continuous Integration and process automation</span><span> </span></li><li><span>Target-oriented, driven work-style with analytic problem-solving skills required.</span><span> </span></li><li><span>Fluent English language skills are essential.</span><span> </span></li></ul><p><span>This is an incredible opportunity to be at the forefront of a groundbreaking industry and work with a dynamic and innovative team. We offer a competitive salary, comprehensive benefits package, and the opportunity to work on some of the most exciting aerospace projects of our time.</span><span> </span></p><p><span>If you have a passion for aerospace and eVTOL, and want to work on challenging and rewarding projects, please apply today!</span><span> </span></p><div><p><span>Want to know more? </span><span>Then view our </span><span>'<a href="https://lilium.com/careers">Why join Lilium</a></span><span>' </span><span>page!</span></p><p>Life at Lilium:</p><p>The wellbeing of our employees is a high priority. In our HQ we have many initiatives such as free healthy food and drinks, free in-house gym and health days. In remote offices we offer online opportunities to stay connected and develop yourself as well including our culture club, learning terminal, Employee Assistance Program and many more.</p><p> <em>Lilium is an equal opportunity employer and welcomes applications from all qualified individuals regardless of ethnicity, sex, disability, religion/belief, sexual orientation or age. </em> </p><p> </p><p> </p></div>

Senior Engineering Lead - Aerospace Software (BMS)

<div>At Wisk, we're transforming the future of urban mobility through safe, all-electric, autonomous flight. We are a passionate team working together toward a sustainable future, solving high-impact problems that have never been solved before. By delivering everyday flight for everyone, we're making it possible to spend less time getting there and more time being there. If you want to be part of shaping the future of mobility, then read on!</div><div><br></div><div><span style="font-size:13.3333px;"> </span></div><div><br></div><div><span style="font-size:11pt;">The successful candidate is currently enrolled in a BS or MS of Electrical Engineering or an equivalent field with ability to conduct high power (high voltage and high current) testing and knowledge of digital and analog circuits. In this role, the candidate must be self-motivated to embrace challenges and adapt quickly or propose changes needed to achieve early results in a timely fashion.</span></div><br><br><h3>What you will do:</h3><ul><li>Lab testing of high powered (high voltage and high current) electronics and system integration</li><li>Writing/modifying codes for system level testing</li><li>DO-160 derisk testing</li><li>Collaborating with engineers from diverse fields</li><div><br></div></ul><h3>Required Skills/Experience:</h3><ul><li>A self-motivated, fast learner with a broad set of skills and never afraid of facing complex technical challenges</li><li>A solution oriented individual with a strong analytical mindset</li><li>A positive team player</li><li>A strong communication and documentation skills</li><li>Knowledge of digital and analog circuits</li><li>Knowledge of overcurrent protection test</li><li>Knowledge of inrush current measurement</li><li>Ability to write codes using python, Matlab and C/C++</li><li>Ability to use oscilloscope, electronic load, multi-meter, ammeter, power supply, etc.</li><li>Familiarity with high power (high voltage and high current) testing</li></ul><br><div><br></div><div><br></div><div>Hourly rate will be $20 USD an hour.</div><div><br></div><div><span style="font-size:13.3333px;">This internship role will be based at Wisk's headquarters in Mountain View, California and relocation or housing will not be provided.</span></div><div><br></div><div><b>Eligibility Requirements For US</b></div><div>Must be able to work on-site in Mountain View, CA</div><div>Must be legally authorized to work in the US</div><div>Must live in the US at both the time of application AND at the time the internship begins</div><div>Must be either a rising sophomore, junior, or senior in college</div><div>Must have a minimum grade point average (GPA) of 3.0, transcripts are required</div><div>Must be an enrolled student at both the time of application AND at the time the internship begins</div><div>Must be able to work 40 hours a week for 10 weeks (full-time for 3 months)</div><div><br></div><div>Wisk Aero is an E-Verify employer.</div>

Electrical Engineering Intern

<div>At Wisk, we're transforming the future of urban mobility through safe, all-electric, autonomous flight. We are a passionate team working together toward a sustainable future, solving high-impact problems that have never been solved before. By delivering everyday flight for everyone, we're making it possible to spend less time getting there and more time being there. If you want to be part of shaping the future of mobility, then read on!</div><div><br></div><div><span style="font-size:13.3333px;"> </span></div><div><br></div><div>We are looking for a Chemical Engineering Intern to join our team. The goal of a Chemical Engineering Intern at Wisk is to work with other cell development engineers and test technicians to perform tests and analysis to verify that the battery cells of the aircraft powertrain operate to meet the technical specifications in a safe manner. You will be part of the Energy Storage and Power Systems (ESPS) team that develops the battery pack and power distribution systems that power all systems on our all-electric aircraft.</div><br><br><h3>What you will do:</h3><ul><li>As part of the ESPS organization, and deployed in the Cell development group, you will act as a Cell Engineering Intern for a novel type of aircraft development targeting the autonomous UAM market</li><li>Work in a multidisciplinary group to drive design of battery cells of high voltage Battery Packs</li><li>Perform cell electrochemical performance, environmental and safety abusal testing under the supervision of senior cell development engineers</li><li>Perform tear-down of the cells, prepare samples, and carry out reference electrode testing</li><li>Develop test protocols and perform testing to obtain calibrations for fast charging algorithms </li><li>Perform analysis and modeling using software tools (GT-Autolion, Pybamm, Comsol, Juliasim etc..) to benchmark battery cells and packs</li><li>Support cycling tests for battery pack and module under the supervision of system testing team</li><li>Post process and report analysis results to support design decisions </li><li>Help design, build and perform experiments of real aircraft systems to calibrate and validate simulations </li><li>Support prototype builds and technology maturation testing to ensure battery packs meet functional requirements.</li><li>You will be responsible for providing analytical support for preliminary &amp; detailed design, through development, validation, certification and manufacturing &amp; operational service</li></ul><h3>Required Skills/Experience:</h3><ul><li>Currently enrolled in a Chemical, Mechanical, Aerospace, or Aeronautical Engineering (or equivalent) MS or PhD program</li><li>You have experience in operating test-stands (Arbin, Maccor or Neware) for batteries or fuel cells</li><li>You have hands-on experience in building coin cells, reference electrode cells through tear-downs of battery cells </li><li>You have hands-on experience building prototypes, setting up and running tests. Preference will be given for experience with EVs, batteries, thermal and fluid systems, power electronics or other high-voltage applications.</li><li>You have applied knowledge of multiphysics engineering analysis and simulation tools for developing system models in 1D (Matlab/Simulink, GT-suite, Amesim, COMSOL, Pybamm etc..)</li><li>You have strong documentation skills and can write detailed test and analysis technical reports.</li><li>Embrace learning, be curious, organized &amp; methodical and pay attention to detail</li><li>Experience working within large assembly environments strongly preferred</li><li>You have a safety-oriented mindset and have worked around hazardous equipment requiring advanced safety training. Experience and training with high-voltage (HV) a strong advantage.</li></ul><br><div><br></div><div><br></div><div>Hourly rate will be $20 USD an hour.</div><div><br></div><div><span style="font-size:13.3333px;">This internship role will be based at Wisk's headquarters in Mountain View, California and relocation or housing will not be provided.</span></div><div><br></div><div><b>Eligibility Requirements For US</b></div><div>Must be able to work on-site in Mountain View, CA</div><div>Must be legally authorized to work in the US</div><div>Must live in the US at both the time of application AND at the time the internship begins</div><div>Must be either a rising sophomore, junior, or senior in college</div><div>Must have a minimum grade point average (GPA) of 3.0, transcripts are required</div><div>Must be an enrolled student at both the time of application AND at the time the internship begins</div><div>Must be able to work 40 hours a week for 10 weeks (full-time for 3 months)</div><div><br></div><div>Wisk Aero is an E-Verify employer.</div>

Battery Cell Engineering Intern

<div>At Wisk, we're transforming the future of urban mobility through safe, all-electric, autonomous flight. We are a passionate team working together toward a sustainable future, solving high-impact problems that have never been solved before. By delivering everyday flight for everyone, we're making it possible to spend less time getting there and more time being there. If you want to be part of shaping the future of mobility, then read on!</div><div><br></div><div>We are looking for an Electrical Engineer to join our Battery Management System (BMS) team of electrical engineers developing the energy storage and power distribution system for our electric eVTOL aircraft. The goal of a BMS Electrical Engineer at Wisk is to design and develop the electronic assemblies controlling and monitoring both low and high voltage, including the  power distribution and circuit protections. You will be part of Powertrain IPT working with the integrated product team that ensures the entire energy storage and power distribution system works safely and correctly.</div><br><br><h3>Within 3 months:</h3><ul><li>Learn about the BMS and aircraft electronics architecture and existing hardware/firmware</li><li>Design and develop the power control, monitoring and conversion system to produce regulated, isolated high and low voltage from the batteries</li><li>Construct and publish Circuit Block Diagrams to describe the architecture of the Battery Management System (BMS)</li><li>Become a reviewer of electrical design releases, assembly procedures, rework plans, and test results</li></ul><h3>Within 6 months:</h3><ul><li>Work in Altium to revise and improve the electrical circuits and subsystems while producing documentation for fabrication and assembly vendors</li><li>Perform component selection and qualification for the BMS and power distribution system</li><li>Support certification compliance testing, test witnessing, safety analysis, and documentation of electrical hardware</li><li>Lead board level and sub-system level troubleshooting and failure mode analysis</li><li>Contribute to writing requirements of new electrical systems, including design for manufacturing and design for testing.</li></ul><h3>Within 12 months:</h3><ul><li>Evaluate options for improving future battery management systems and power distribution architecture</li><li>Lead the effort to optimize weight savings throughout the ESPS electrical power, protection and distribution system</li><li>Be the focal point for aviation regulators (FAA, EASA, Etc) conversations on technical issue resolution with the High Voltage Battery System</li></ul><h3>What you have done:</h3><ul><li>B.S. in a relevant engineering discipline with at least 6 years of experience with the tasks listed above (M.S or PhD count towards years of experience)</li><li>Experience with development, design, analysis and test of: Analog Sensor Interfaces, Power Supplies, Topology Selection, and Microprocessor Integration for High Voltage Battery and power distribution systems</li><li>Experience in a rigorous development, verification, documentation environment similar to aerospace DO-254 is a plus.</li></ul><h3>Desired:</h3><ul><li>Design knowledge of electrical bonding criteria, thermal cooling requirements for electronic equipment, EMI shielding, and High Intensity Radiated Fields (HIRF) / Indirect Effects of Lightning (IEL) installation criteria is considered a plus</li><li>Understanding of and experience with designing and testing to Environmental Standards RTCA DO-160 (or equivalent MIL-Specs or Automotive standards)</li></ul><h3>Who you are:</h3><ul><li>You are a highly motivated, self starting individual with a broad set of skills and never afraid of facing complex technical challenges</li><li>You are a solution oriented individual with a strong analytical mindset</li><li>You have strong communication skills and can easily tailor your communications to suit the audience</li><li>You can adapt quickly or propose changes needed to achieve early results in a timely fashion</li><li>You embrace challenges and take commitments and deliver results within reasonable expectations</li><li>You are a positive team player</li></ul><br><div>We are located in Mountain View just a couple of hundred feet from Shoreline Lake and its surrounding walking/jogging trails. We offer a comprehensive benefits package including medical, dental, vision and life insurance, alternative work schedule (9/80), flexible time off, 11 company holidays, a 401(k) plan with 50% company matching vested immediately, commuter assistance, and education assistance. And on top of all that, we also offer a variety of perks such as free catered lunches, flight lessons, wellness allowances, snacks, drinks, fruit, employee referral bonus, charitable giving match, patent bonus program, happy hours and much more.</div><div><br></div><div>Wisk Aero provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Wisk Aero abides by applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.</div><div><br></div><div>Wisk Aero is an E-Verify employer. </div>

Explore jobs

Get Hired

Discover climate organizations

Join our Fellowship

Post a job

Speak at our Fellowship

Become a Climatebase member

PLATFORMS

MEMBERS

WHO WE ARE