<div><h3>About Plenty</h3><div>Plenty is on a mission to make fresh, pesticide-free fruits and vegetables more accessible to everyone.  Our cutting-edge indoor, vertical farms produce extraordinary yields using a fraction of the land and water outdoor farms need.  Nutrient-rich, mouth-watering and locally grown, our crops help people, communities and our planet to be healthier and more resilient.The people and teams who make up Plenty are at the core of how we do this.  We are a collaborative and innovative bunch.  We are passionate about our contributions to Plenty, the communities around us and our planet, but never take ourselves too seriously.  We’re down to Earth, we grow together, and we always find a way.  Most importantly, we are growing for a better tomorrow, today.</div></div><h3>About the role</h3><div>Plenty is looking for a Senior Staff Mechanical Design Engineer experienced in the design and construction of HVAC and thermal systems in mission critical and/or manufacturing applications to  become part of our Engineering team.  Our mission is to build and operate efficient, reliable and cost effective indoor farms which are essential to Plenty’s growth.In this role, you will own and manage end-to-end design, construction and operation of our farm mechanical and other support systems. You will be responsible for providing strategic leadership for a high impact infrastructure with technical complexity, while also being a technical lead/individual contributor for the Mechanical discipline. You will contribute deep knowledge and subject matter expertise related to HVAC and thermal systems including leading the design, modification, analysis, and supporting operation for our new and existing farms.</div><h3>What you'll do </h3><div><ul><li>Collaborate with internal stakeholders to define project criteria to meet Plenty business and technical needs.  This includes defining scope, specifying technical requirements as part of design criteria/ basis of design, and long lead equipment specification development, etc. for the Consultant/Contractor to develop project specific contract/construction documentation. </li><li>Manage external consultants/contractors to implement project requirements from concepts through contract/construction documents, and construction administration   </li><li>Research new technologies related to HVAC design, equipment selection, and construction methods to drive innovation.  </li><li>Perform independent engineering and cost analysis, including but not limited to calculations of HVAC loads, system energy-use, and process gas demand, etc.  </li><li>Lead conceptual designs with Mechanical Engineering of Record (EOR) to ensure design options have been evaluated/vetted prior to proceeding with the final design option.  </li><li>Conduct reviews of consultants’ engineering calculations, design drawings and specifications to identify design and scope gaps to minimize change orders in the field.</li><li>Review Contract/construction documentation including, but not limited to, building automation/management system design, including sequences of operation, instrumentation selection, process and instrumentation diagrams (P&amp;IDs) and panel drawings</li><li>Coordinate with contractors, equipment manufacturers, and commissioning agents in collaboration with Consultants/EORs to ensure proper equipment selection, quality installation, commissioning and testing to meet design intents.</li><li>Manage mechanical OFCI equipment/systems including leading technical requirement reviews with vendors, conducting specification compliant reviews and bid leveling with assistance from the Plenty Supply Chain team, and conducting factory witness testing.   </li><li>Provide construction administration support to the project team including, but not limited to, responding to RFI’s, reviewing submittals/shop drawings, design change bulletins  and associated design and construction fees/costs, participating in bid interviews and bid leveling efforts  </li><li>Oversee HVAC system start-up and commissioning to ensure quality installation and the systems function as intended in the design.</li><li>Track and manage budgets for HVAC and thermal system scopes</li><li>Provide technical assistance for operations of HVAC systems, including chilled water plants, air handling systems, other refrigeration equipment, building management/automation, and controls systems</li><li>Provide solutions to fast paced projects with competing priorities.  You must be able to prioritize your work to meet project demands without compromising the quality of your deliverables.</li><li>Respond to emergencies on an as needed basis.</li><li>Train and mentor other team members</li><li>Travel up to 25% of the time</li><li>Others duties as assigned - we’re a growing scale-up so you never know what you might get the opportunity to work on as we grow</li></ul></div><h3>What you'll bring to the table</h3><ul><li>Bachelor’s Degree in engineering from ABET-accredited institution</li><li>Minimum 12 years’ related work in architecture, engineering &amp; construction environments.  A focus on dehumidification systems, data centers, or related processes is desirable. </li><li>Advanced understanding of mechanical engineering concepts, including thermodynamic and fluid dynamic principles. Sophisticated grasp of psychrometric principles and calculations.</li><li>Experience with design and construction processes in the selection of equipment, materials and the preparation and assembly of engineering design packages, calculations, and specifications.</li><li>Knowledge of industry standard practices, building codes, and thorough understanding  of mechanical standards including ASHRAE guidelines.</li><li>Troubleshooting and analytical skills are required  </li><li>PE and MSME are preferred, but not required. </li><li>Effective written and verbal skills to convey/communicate project requirements to internal and external project team members/partners </li></ul><h3>Type of role</h3>Full-Time /Hybrid- in office 3 times a week minimum<h3>What we can offer </h3><ul><li>Compensation: we’ll pay you a competitive salary on a biweekly basis, give you a stake in the company via equity and contribute toward your 401K </li><li>Health &amp; well-being: we’ll invest in your physical and mental well-being with comprehensive medical, dental, &amp; vision benefits, along with support for your mental health through Spring Health and financial wellness through LearnLux. Plus pet insurance for your furry family members!</li><li>Food: in-office snacks and access to our leafy greens &amp; new produce in development -- are you up for a side gig as a taste tester?</li><li>Grow together: learning &amp; development opportunities including lunch &amp; learns, training certifications, and more</li><li>Equipment: we’ll provide you with the equipment you need to be successful, including $75/month toward your home internet and phone bills and $250 every 2 years to upgrade your phone </li><li>Paid time off: we know you’ll do your best if you’re taking time to recharge, so we don’t cap the amount of vacation days you can take off per year + offer 6 days of paid sick leave per year in addition to the paid holidays we observe</li><li>Parental leave: 12 weeks off for eligible new parents - fully paid so you can focus your energy on your newest addition </li></ul>

Revolutionizing farming with local, sustainable indoor farms for a healthier, tastier, and greener future.

Senior Staff Mechanical Design Engineer

<div><div>Company Overview:At Overair, we are dedicated to bringing next generation sustainable air transportation to everyone.  Our answer is Butterfly, an all-electric vertical takeoff and landing (VTOL) aircraft designed to safely and affordably carry passengers over traffic and congestion. Butterfly leverages over two decades of VTOL aircraft development, patented VTOL technology, and flight vehicle experience. Overair believes in the lofty goals of sustainable air mobility and we are committed to solving the hard challenges along the way.  We are building an industry leading team covering an expanse of skills, talents, and expertise in order to build a superior electric VTOL aircraft. If you enjoy solving difficult problems, and seeing your ideas and visions expressed in flight hardware, we want you on our team.Job Overview:Overair is seeking an experienced Aerodynamics Engineer to help guide and execute numerical aerodynamics analysis and design tasks towards the revolutionary Butterfly electric vertical takeoff and landing aircraft. The Aerodynamics CFD Engineer will have exposure to no shortage of novel and interesting aerodynamic phenomena: from traditional wing/body/tail CFD analyses, to challenging and engaging propeller-airframe interaction effects, to detailed analyses of our low-noise propellers. The engineer will work with a wide swath of the Overair engineering team including the performance, loads and criteria, flight controls, test and evaluation, thermodynamics, airframe, industrial design and conceptual design teams to provide important aerodynamics support from early design stages through certification flight testing of Butterfly.Roles and Responsibilities:The Aero CFD Engineer will be part of a team that will have broad responsibility in aerodynamics-related tasks. Each engineer will be expected to be able to execute a majority, but not necessarily all of the following items:<ul><li>Analytical modeling of the aircraft using steady and unsteady flow solutions.</li><li>Analytical modeling of the rotating components of the aircraft in isolation and installed on the vehicle.</li><li>Generate high-quality CFD meshes of complex geometries from CAD surfaces.</li><li>Assist with CFD database generation for external loads, stability and control and aircraft performance.</li><li>Automate and streamline CFD workflows.</li><li>Support design trade studies with CFD data.</li><li>Support the thermodynamics team with air inlet and exhaust analysis and design.</li><li>Support ground and flight test activities including analyzing and interpreting experimental and computational data.</li><li>Analysis and design of high-lift systems.</li><li>Detailed analyses of control surface gaps, leakage and large excrescence items.</li><li>Generate data in support of an aero smoothness specification including criteria for surface roughness, pillowing, waviness, steps and gaps.</li><li>Enhance the CFD team's set of tools by evaluating and onboarding new aerodynamics tools, improving the use of current tools, and validating aerodynamics tools.</li></ul>Required Qualifications:<ul><li>Master’s degree from an accredited university in Aeronautical, Aerospace Engineering, or a related discipline with at least 8 to 10 years of professional experience; or PhD and 6 years in the aerospace industry and aerodynamics fields.</li><li>Excellent analysis skills and a track record of demonstrated success analyzing actual products.</li><li>Highly experienced in computational fluid dynamics tools such as STAR-CCM+, Fun3D, Overflow, or similar.</li><li>Experience using industry-standard mesh generation tools on complex geometries.</li><li>Experience with industry-standard CFD post-processing tools.</li><li>Working knowledge of scripting and automation tools such as Linux/Bash, Python, C++, or Matlab.</li><li>Adept at running sweeps of CFD runs for support of aircraft design trade studies or generation of databases for stability and control, external loads or performance evaluations.</li><li>Experience post-processing and extracting relevant data from CFD databases</li></ul>Preferred Qualifications:<ul><li>Extensive CFD experience modeling rotorcraft (3-4 years), or other types of rotor- or propeller-powered VTOL vehicles.</li><li>Experience with Pointwise and with Tecplot.</li><li>Experience with advanced meshing techniques (such as adjoint, overset or adaptive).</li><li>Experience producing large aerodynamic databases that merge CFD and non-CFD data sources.</li><li>Experience correlating model outputs to experimental data produced via wind tunnel and/or flight tests. Prior experience supporting experimental campaigns including wind tunnel and flight testing is also a plus.</li><li>Familiarity with vorticity-based solvers such as CAMRADII, CHARM, or similar</li><li>Prior exposure to aerodynamics support of vehicle conceptual design and a good understanding of the aircraft governing forces, moments and physics of flight.</li><li>Experience with CFD-based aerodynamic shape optimization.</li><li>Proficient in 3D CAD surface definition via 3DExperience generative shape design (preferred), CATIA V5/V6, SolidWorks, or similar.</li></ul>Summary of Benefits:<ul><li>Overair pays 100% of the premiums for Medical, Dental, and Vision for employees and dependents.</li><li>Flexible Spending Account with a company match of up to $1,000.</li><li>401(k) plan with a 6% company match, no vesting period, and immediate eligibility.</li><li>12 weeks of supplemental paid family leave.</li><li>Company-paid Life &amp; AD&amp;D Insurance.</li><li>Voluntary Life, Accident, Hospital Indemnity, and Critical Illness insurance.  </li><li>Employee equity incentive program (stock options).</li><li>No cost Employee Assistance Program and Virtual Counseling.</li><li>Generous paid time off policy, including 4 weeks of vacation, 10 holidays, 6 sick days, and volunteer time.</li></ul>Pay range Overair expects to pay: $140,000-185,000 per year. Your level and the compensation package offered will be determined by location, job-related knowledge, skills, and experience.Remote possibility.Diversity and Inclusion:Overair believes that diversity and inclusion are vital to our success. We believe that by embracing different ideas and approaches, we enhance our ability to deliver the best results for our employees, our environment, and ultimately our business partners and customers. We foster a culture where all colleagues are able to share their passions and ideas in order that we may collectively embrace and overcome the challenges in our industry, and work toward a brighter future.Overair is an Equal Opportunity / Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, age, or any other federally protected class.  </div></div><div><div></div></div>

Staff Engineer, Aerodynamics

<div><h3>About Plenty</h3><div>Plenty is on a mission to make fresh, pesticide-free fruits and vegetables more accessible to everyone.  Our cutting-edge indoor, vertical farms produce extraordinary yields using a fraction of the land and water outdoor farms need.  Nutrient-rich, mouth-watering and locally grown, our crops help people, communities and our planet to be healthier and more resilient.The people and teams who make up Plenty are at the core of how we do this.  We are a collaborative and innovative bunch.  We are passionate about our contributions to Plenty, the communities around us and our planet, but never take ourselves too seriously.  We’re down to Earth, we grow together, and we always find a way.  Most importantly, we’re here to improve the lives of plants, people and our planet.</div></div><h3>About the role</h3><div>Plenty is looking for a Staff Software Engineer to join our Technology team in designing and building powerful systems for cooperative human-robot precision farming.  Plenty grows nutritious and delicious plants sustainably at scale.  To do this, we must create an operating system for high-precision, high-automation farming.   You will be responsible for building advanced Farm Operating System (FarmOS) execution systems for Plenty's production and Research &amp; Development (R&amp;D) lines. You will be joining a collaborative team of engineers with a strong software development background. We are process-light and rely on strong architecture and automation to maximize the impact of our small team.As a Staff Software Engineer you will undertake hands-on design and development. You will be responsible for requirements analysis, design, implementation, and testing as part of a cross-functional team serving all roles connected to all aspects of farm operation. You will work with Plant Scientists, Growers, Controls Engineers, Mechanical Engineers, and Operators as part of the design process, making sure that we build the right thing in the right way for maximum impact.</div><h3>What you'll do</h3><div><ul><li>Develop a deep understanding of our Farm Operations and all supporting systems, services, and data flows</li><li>Take farm orchestration and automation features from concept to finished product in production and daily use</li><li>Design and build scalable, highly-available service-oriented architectures</li><li>Collaborate with other members of the Engineering team through all phases of our agile software development lifecycle to deliver a holistic solution</li><li>Lead and participate in software design review sessions with team members and customers</li><li>Develop robust test harnesses for everything you build</li><li>Identify and improve inefficiencies in collaboration workflows, development and product processes to help the team mature while mentoring fellow Software Engineers</li><li>Design and implement RESTful microservices based on user research</li><li style="font-weight:400;">Other duties as assigned</li></ul></div><h3>What you'll bring to the table</h3><ul><li>Education or experience equivalent to B.S. (or higher) in Computer Science or other Engineering discipline and 7+ years of progressive experience in Software Engineering</li><li>You approach your work with curiosity, creativity, initiative, and diligence</li><li>An exceptional communicator -- you thrive at translating product and business goals into robust technical solutions, and can explain those solutions to teammates in differing domains</li><li>Experience establishing patterns, conventions, and standards and driving adoption across a team</li><li>Ability to identify areas of improvement and ways to standardize and clean up a stack -- you’re super organized and have a meticulous attention to detail</li><li>You know the ins and outs of developing server applications using Python and Java </li><li>Experience managing configuration in standard cloud providers such as AWS</li><li>Experience with Git, CI/CD workflows and tools, and a diverse set of databases such as PostgreSQL and Snowflake</li></ul><h3>Type of role</h3>Full-Time; Remote<h3>What we can offer </h3><ul><li>Compensation: we’ll pay you a competitive salary on a biweekly basis, give you a stake in the company via equity and contribute toward your 401K </li><li>Health &amp; well-being: we’ll invest in your physical and mental well-being with comprehensive medical, dental, &amp; vision benefits, along with support for your mental health through Spring Health and financial wellness through LearnLux. Plus pet insurance for your furry family members!</li><li>Food: in-office snacks and access to our leafy greens &amp; new produce in development -- are you up for a side gig as a taste tester?</li><li>Grow together: learning &amp; development opportunities including unlimited access to lunch &amp; learns, training certifications, and more</li><li>Equipment: we’ll provide you with the equipment you need to be successful, including $75/month toward your home internet and phone bills and $250 every 2 years to upgrade your phone </li><li>Paid time off: we know you’ll do your best if you’re taking time to recharge, so we don’t cap the amount of vacation days you can take off per year + offer 6 days of paid sick leave per year in addition to the paid holidays we observe</li><li>Parental leave: 12 weeks off for all new parents - fully paid so you can focus your energy on your newest addition </li></ul>If you reside in California, Colorado, New York, or Washington please send an email to talentacquisition@plenty.ag to receive compensation information for this role.

Staff Software Engineer (Farm Integration)

Are you ready to build America’s clean energy future with the team that will deliver? Form Energy is an American energy technology and manufacturing company. We are pioneering a new class of iron-air batteries to enable our electric grid to run on renewable, reliable, and affordable energy, every day of the year. Form Energy has been recognized by TIME as “One of the Best Inventions of 2023” for its battery technology and by MIT Technology Review as a “Top Climate Tech Company to Watch”. We are making rapid progress on our mission of delivering energy storage for a better world, and are growing just as rapidly to meet demand. Our team has more than doubled in size in the past year, and continues to expand every day. We have signed contracts with leading electric utilities across the United States. Pilot production of our iron-air batteries has already begun, and later this year, production will take off to high volumes at our new factory in West Virginia. Working for Form Energy is more than just a job, it’s a chance to be part of something extraordinary. And right now might be the most exciting moment in the company’s history to join. We are assembling a team of some of the most talented and motivated individuals across the country. Driven by our core values of humanity, excellence, and creativity, our team is determined to deliver on our mission and transform the energy landscape for the better.Feeling energized to make a meaningful impact on the world? Then keep reading - you’ve come to the right place. <h2>Role Description</h2>Form Energy is hiring a staff electromechanical engineer to join our Test Infrastructure Team in our Somerville, MA facility. This role will contribute to defining the system-level architecture, detailed controls, and electrical design of Form Energy's test infrastructure.Reporting to the Manager of Test Infrastructure, this role will be integral to proving our sub-scale and full-scale cells and battery module performance. You will contribute to developing and deploying novel, state-of-the-art test equipment, contributing towards the hardware and software development of our test capabilities, and providing technical mentorship to a growing team. We are a hands-on team who all love diving into challenging problems like test troubleshooting and solving these problems for future tests. This is an exciting opportunity to be part of scaling our multi-day energy storage system and contributing to a sustainable future! Relocation assistance is available.What you'll do:<ul style=""><li>Own the electrical and electromechanical design of Form’s test stands, including power distribution design, harnessing, safety and interlocks, and data collection</li><li>Design and develop electromechanical and electrical systems in support of test stand safety, improvements, and simplification</li><li>Provide technical leadership and mentorship within a multidisciplinary engineering team, fostering the growth and problem-solving skills across team members</li><li>Work with internal and external teams to bring your designs to fruition</li><li>Engage with stakeholders to align on test stand requirements</li><li>Troubleshoot and root-cause test setups for battery modules and cells</li></ul><h3>What you'll bring:</h3><ul style=""><li>A degree in Electrical/Mechatronics Engineering or a related field; bachelor's with 7+ years, or master's with 3+ years of relevant experience developing medium to high volume electrical/automation equipment</li><li>Proven experience with electrical and mechanical design and proficiency in CAD (SolidWorks, NX, etc.)</li><li>Experience with scripted programming languages like Python for instrument control and/or data analysis</li><li>Experience working with data acquisition systems (Keysight, National Instruments, etc.)</li><li>Familiarity with PLCs/HMIs</li><li>Knowledge of designing electrical test setups to both minimize resources for setup and maximize the length of the test without interruption </li><li>Leadership, the ability to mentor, and well-developed communication, collaboration, and engagement skills working with a variety of teams and stakeholders</li><li>Ability to thrive in a fast-paced, startup environment</li></ul>#LI-DNIHumanity is a cornerstone of Form Energy’s culture, and we make sure our compensation and benefits reflect that. Form Energy offers competitive salaries, stock options, and a holistic benefits package to ensure all employees have what they need to thrive while working here. When it comes to you and your family’s health, we cover 100% of medical, dental, and vision premiums for full-time employees - and 80% of healthcare premiums for dependents. This starts from day one. We also offer at least 12 weeks of paid leave for new parents (up to 20 weeks for birthing parents), and generous vacation policies to give employees time to recharge when needed. To build a clean and equitable energy future, we need everyone at the table. We strive to form a team as diverse as the communities we will serve with our technology, and are committed to maintaining an inclusive environment for all employees. We are proud to be an equal opportunity employer, and encourage candidates from all backgrounds to apply to our open jobs.

Revolutionizing renewable energy with cost-effective, multi-day storage systems for a reliable and sustainable electric grid.

Staff Electromechanical Engineer

Tomorrow.io’s Space &amp; Sensors team is responsible for the development of unique RF-based sensing systems, such as radar and sonar, from architecture through implementation. The team is also responsible for the  development of corresponding spacecraft and constellations in support of Tomorrow.io’s Operation Tomorrow Space, which will collect data to be integrated seamlessly into our existing forecasting and modeling systems, revolutionizing global weather intelligence.We are looking for a Radar Test Engineer to join a cutting edge, multidisciplinary team focused on advancing the design, development and deployment of next-generation spaceborne, airborne and ground-based RADAR and radiometer systems.  Applications include, but are not limited to, weather monitoring and remote sensing from space-based and airborne platforms.  As a Radar Test Engineer at Tomorrow.io, you will play a critical role in hardware and sensor development through work including development, execution, and documentation of complex hardware test systems; growing/enabling the hardware test capabilities of Tomorrow.io, especially through test automation; and ultimately validating systems for operational deployment across underwater, airborne, and in-space environments.What you’ll do:<ul><li>Work closely with mechanical, digital, RF hardware, software and systems engineers within small engineering design teams</li><li>Design and document test plans, procedures, protocols, and generate automation scripts to assess, qualify, and verify performance of RF, analog and digital hardware to meet system requirements</li><li>Set up and build test fixtures, harnesses, and apparatus</li><li>Complete tests of subsystems and systems; analyze and document results </li><li>Develop technical reports as well as user guides for RF Systems</li><li>Provide feedback, recommendations, and design modifications to overcome design limitations and improve performance and testing</li><li>Track laboratory equipment calibration and supplies</li><li>Oversee laboratory technicians and staff </li></ul>What you bring:<ul><li>B.S. degree in electrical or computer engineering with 3+ years experience testing complex hardware, developing test setups; working with relevant test equipment including, but not limited to network analyzers, spectrum analyzers, signal generators, noise figure meters, power meters, oscilloscopes, and logic analyzers.</li><li>Expertise with Linux operating systems and with Python or similar scripting languages, especially as they apply to control and automation of test equipment. </li><li>Enjoy and understand the importance of documented test procedures and well analyzed test results over broad use environments.</li><li>Experience with specifications of custom test equipment: breakout boxes, level translators, custom harnesses.</li><li>Excellent time-management and communication skills.</li></ul> So if your passion is to test cutting edge next-generation RADAR systems to provide weather intelligence to the world and have fun while doing so, then this team is for you.If you have reached this point and you are super excited but not sure you check all the boxes - we still want to speak with you! Your passion is priceless. Other things can be learned.This position requires access to technology that is controlled under U.S. export control laws and regulations. Accordingly, this position is restricted to U.S. citizens, permanent residents and protected individuals unless and until any required licenses are obtained.Tomorrow.io is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. Tomorrow.io participates in the E-Verify program in all US states, as required by law.At Tomorrow.io we have established a workplace culture that values fairness and equal opportunities and we believe it is crucial for fostering a positive and productive environment. Regularly reviewing and adjusting pay practices to align with legitimate drivers of pay, such as job level, geographic location, and performance, demonstrates a commitment to maintaining equity within the organization.This commitment to ongoing assessment and improvement is key to creating a workplace that is not only diverse and inclusive but also fair and just. Anticipated salary range for this role is $80k-$125k subject to local market and candidates skills and experience. Comprehensive health benefits, unlimited paid time off and other benefits included. Relocation assistance may be offered/available for certain roles.Tomorrow.io is committed to providing reasonable accommodations for candidates with disabilities in our recruiting process. If you need any assistance or accommodations due to a disability, please let us know at jobs@tomorrow.io_____________________________________________________________________________About tomorrow.io:Tomorrow.io is helping Countries, Businesses and Individuals better manage their Climate Security Challenges. Fully customizable to any industry impacted by the weather, customers around the world including Uber, Delta, Ford, National Grid and more use Tomorrow.io to dramatically improve operational efficiency. Tomorrow.io was built from the ground up to help teams predict the business impact of weather, streamline team communication and action plans, improve productivity, and optimize profit margins.Space: In case you have not heard, we are also going to space with our Operation Tomorrow Space initiative. We are building the first-of-its-kind proprietary satellites equipped with radar, and launching them into space to improve weather forecasting technology for everyone on Earth. Ethos: Our ethos guides us in everything we do - The people of Tomorrow are here to make an impact, they show true grit, and always put people first.How we roll: We believe that magic happens when people work together. The People of Tomorrow take ownership with a bias for action. We believe in transparency and directness, putting work before ego, and empathy. The People of Tomorrow have a can-do attitude, are resilient, and curious. They are growth oriented, value people striving to be experts, and love to have fun. Here, your success is achieved by your impact and deliveries and not by the hours you put in. We have flexible hours and unlimited vacation days policy. The People of Tomorrow show empathy, mutual respect and work as one diverse team. We grow fast and move faster but we always see people first. Each person has their own career growth path for we believe that the only way for the company to grow is if you grow.

Unlock the power of weather intelligence for enhanced operations and increased profitability with Tomorrow.io.

Radar Test Engineer

Are you ready to build America’s clean energy future with the team that will deliver? Form Energy is an American energy technology and manufacturing company. We are pioneering a new class of iron-air batteries to enable our electric grid to run on renewable, reliable, and affordable energy, every day of the year. Form Energy has been recognized by TIME as “One of the Best Inventions of 2023” for its battery technology and by MIT Technology Review as a “Top Climate Tech Company to Watch”. We are making rapid progress on our mission of delivering energy storage for a better world, and are growing just as rapidly to meet demand. Our team has more than doubled in size in the past year, and continues to expand every day. We have signed contracts with leading electric utilities across the United States. Pilot production of our iron-air batteries has already begun, and later this year, production will take off to high volumes at our new factory in West Virginia. Working for Form Energy is more than just a job, it’s a chance to be part of something extraordinary. And right now might be the most exciting moment in the company’s history to join. We are assembling a team of some of the most talented and motivated individuals across the country. Driven by our core values of humanity, excellence, and creativity, our team is determined to deliver on our mission and transform the energy landscape for the better.Feeling energized to make a meaningful impact on the world? Then keep reading - you’ve come to the right place. <h2>Role Description</h2>Form Energy is scaling a new class of battery manufacturing. In this role, you are the automation subject matter expert defining the automation strategy, designing and deployingWe are looking for a Robotics and Automation expert who will  create our automation strategy and capabilities for scaling production. As part of our Assembly Manufacturing Engineering team, you will work closely with the product design team to develop manufacturing-ready products and create initial manufacturing processes. This is an exciting opportunity to help shape and be part of the growth of a fast-moving company with breakthrough technology and an incredible mission!This role will be located at <a href="https://formenergy.com/form-factory-1/">Form Factory 1</a> in Weirton, WV, which is just a short drive outside of Pittsburgh, PA<h3>What you'll do:</h3><ul style=""><li>Lead the design and development of robotics and automation systems to streamline manufacturing processes and improve overall efficiency.</li><li>Collaborate with cross-functional teams including mechanical engineers, electrical engineers, software developers, and manufacturing engineers to integrate robotics and automation solutions into existing systems.</li><li>Conduct feasibility studies and risk assessments to evaluate the potential benefits and challenges of implementing robotics and automation technologies.</li><li>Design, program, and implement robotic systems using various technologies such as robotic arms, vision systems, sensors, and actuators.</li><li>Develop and optimize control algorithms and software for robotic systems to ensure accurate and efficient operation.</li><li>Manage projects from concept to completion, including defining project requirements, creating project plans, and coordinating resources to meet project milestones and deadlines.</li><li>Stay current with advancements in robotics and automation technologies, and recommend innovative solutions to improve manufacturing processes and achieve business objectives.</li><li>Collaborate with external vendors and suppliers to source components and equipment for robotics and automation projects, ensuring compliance with quality and safety standards.</li><li>Troubleshoot and resolve issues with existing robotics and automation systems, implementing corrective actions and continuous improvement initiatives as needed.</li></ul><h3>What you'll bring:</h3><ul style=""><li>10+  years of experience in robotics, automation, and/or mechatronics engineering, with a proven track record of successful project execution.</li><li>Bachelor’s degree in Mechanical Engineering, Electrical Engineering, Robotics, or a related field; advanced degree preferred.</li><li>Proficiency in programming languages such as C/C++, Python, and/or MATLAB for robotics and automation applications.</li><li>Strong knowledge of robotic kinematics, dynamics, and control theory.</li><li>Experience with CAD software for 3D modeling and simulation (e.g., SolidWorks, AutoCAD).</li><li>Familiarity with industry standards and regulations related to robotics and automation (e.g., ISO 10218, ANSI/RIA R15.06).</li><li>Proven leadership abilities, with experience leading cross-functional teams and driving projects to successful completion.</li><li>Strong organizational and time management skills, with the ability to manage multiple projects simultaneously.</li><li>Experience working in a high volume manufacturing environment required.</li></ul>#LI-Onsite#LI-DL1Humanity is a cornerstone of Form Energy’s culture, and we make sure our compensation and benefits reflect that. Form Energy offers competitive salaries, stock options, and a holistic benefits package to ensure all employees have what they need to thrive while working here. When it comes to you and your family’s health, we cover 100% of medical, dental, and vision premiums for full-time employees - and 80% of healthcare premiums for dependents. This starts from day one. We also offer at least 12 weeks of paid leave for new parents (up to 20 weeks for birthing parents), and generous vacation policies to give employees time to recharge when needed. To build a clean and equitable energy future, we need everyone at the table. We strive to form a team as diverse as the communities we will serve with our technology, and are committed to maintaining an inclusive environment for all employees. We are proud to be an equal opportunity employer, and encourage candidates from all backgrounds to apply to our open jobs.

Staff Robotics & Automation Engineer

<div><div>COMMISSIONING ENGINEER - WASTEWATER/WASTE SPECIALIST Company Description: Anaergia is a global leader in the production of clean energy, fertilizer, and recycled water from virtually any waste stream, offering the widest range of maximizing resource recovery solutions for the municipal, industrial, commercial and agricultural markets. Anaergia’s integrated solutions create value for its customers in the forms of renewable energy, quality fertilizers, and clean water, while dramatically reducing the cost of waste management. Anaergia delivers integrated solutions globally through established offices in North America, Europe, Africa, and Asia and its breakthrough technologies are in use at over a thousand resource recovery facilities worldwide, reducing greenhouse gas emissions while creating new revenue sources for its clients. Job DescriptionThis role reports to the Commissioning Manager.  Commissioning Engineer Goals<ul><li>Ensure planning, coordination and cooperation between sub-contractors and vendors on site.</li><li>Ensure the application of the highest safety standard in the start-up and commissioning phase as well as the full compliance to the safety rules.</li><li>Fulfill the agreed reporting with reliable data and within the requested deadline.</li><li>Ensure that all equipment supplied by Anaergia and plant functional tests have been carried out.</li><li>Establish and maintain the Commissioning Program.</li><li>Ensure relevant documentation is in place.</li><li>Ensure correct procedures are followed.</li><li>Ensure a safe system of work is established and maintained</li><li>Coordinate training and ensure that training programs are completed as specified.</li><li>Provide/assist in training activities on the relevant equipment</li><li>Produce Risk Assessments and Method Statements (RAMS) for specific commissioning activities as required.</li><li>Review the RAMS of sub-contractor commissioning or undertaking remedial work on the plant</li><li>Manage the activities of sub-contract commissioning teams.</li><li>Report non-conformance issues to the Commissioning Manager.</li><li>Update drawings and operational documentation to reflect changes made during the commissioning phase.</li><li>Ensure that Site Acceptance Tests (SAT’s) are completed, defects recorded, and arrangements made to rectify any plant faults.</li></ul> Commissioning Engineer Tasks<ul><li>Prior to the start of commissioning, obtain all up-to-date As-Built documentation (Drawings, test sheets, contingency plans). Retain a copy of this on site.</li><li>Carry out the commissioning process and tests in accordance with approved procedures and checklists, identify additional requirements for testing as required, prepare documentation and procedures to allow commissioning activities, and ensure commissioning activities are carried out in a safe manner. o Monitor and plan the delivery of supplies and services (expediting &amp; logistics) unless it is not covered by the supply chain</li><li>Manage the activities of sub-contract commissioning teams.</li><li>Manage directly and/or via contractors the Quality Assurance / Quality Control;</li><li>Provide technical knowledge for all areas of the plant.</li><li>Arrange for operations staff to attend scheduled training sessions</li><li>Follow and adhere to the commissioning schedule;</li><li>Maintain works methodologies, contractor test plans, and equipment check sheets;</li><li>Complete I/O check sheets for digital input/outputs and analog input/outputs.</li><li>Coordinate all resources involved in site activities, both internal or external (outsourcers/sub-contractors), either through the updating and distributing of detailed schedules and/or setting regular site meetings;</li><li>Early identification of project risks for and early adoption of appropriate countermeasures;</li><li>Manage relationships with vendor and sub-contractor for what is concerning technical issues and organization of tasks, including technical correspondence, leaving to the PM the management of contractual-related communication;</li><li>Complete relevant commissioning test sheets.</li><li>Manage and update defects/punch lists.</li><li>Configuring and setup of PLC hardware and HMI Panels.</li><li>Troubleshooting PLC code, confirming signals to and from PLC inputs/outputs, and field instruments.</li><li>Configuring and setup of instrumentation devices in the field.</li><li>Configuring and setup of industrial communication devices and protocol/signal converters.</li><li>Troubleshooting industrial network devices and communication equipment in the field.</li></ul>  Job Requirements: Education: Holds a technical diploma or graduation in  / Mechanical engineering/ Electrical Engineering/ Mechatronics Engineering, Automation &amp; Instrumentation Technologist or Technician  equivalent  Experience: Minimum of 5 years experience as a Commissioning Engineer in the Industrial Plant business.  Competencies:The Commissioning Engineer has the following technical skillsets:<ul><li>Deeply understands and has the ability to manage contracts for supplying complex plants;</li><li>Specialty in control systems, industrial networks, and communication protocols, programming PLCs, development of SCADA systems, and experience with Siemens S7 via TIA Portal and Allen Bradley Controllogix and Compactlogix via Studio 5000.</li><li>Specialty in programming HMI Panels, experience with Siemens Intouch and Allen Bradley PanelView series HMI’s.</li><li>Solid Waste / Wastewater / Biogas / Power Generation specific competencies.</li><li>Some experience in purchasing is required;</li><li>Ability to manage detailed job schedules;</li><li>Knowledgeable in “site” project administration;</li><li>Skilled in understanding technical drawings, documents, and specifications;</li><li>Widely, rather than deeply, knowledgeable in all the disciplines involved with the construction and installation (civil, mechanical, electrical, instrumental, etc.);</li><li>Knowledgeable in construction codes and regulations;</li><li>Knowledgeable in quality control of all supplies;</li><li>Experienced in training resources on safety and technical matters</li><li>Experienced in managing relationships with Customers;</li><li>Experienced in leading and coordinating the assigned resources;</li></ul> Location:This would be a remote role with nearly 60-70% travel included at project sites, and remaining work in a hybrid/remote setup. This could be located in either Carlsbad, Rhode Island, or Charlotte.The contract time frame is between 6 -9 months. </div></div>

Anaergia was created to eliminate a major source of greenhouse gases by cost effectively turning organic waste into renewable natural gas (biomethane), fertilizer and water. With a proven track record of delivering world-leading projects on four continents, Anaergia is uniquely positioned to provide end-to-end solutions for extracting organics from waste, implementing high efficiency anaerobic digestion, upgrading biogas, producing fertilizer and cleaning water. Our customers are in the municipal solid waste, municipal wastewater, agriculture, and food processing industries. In each of these markets Anaergia has built many successful plants including some of the largest in the world.

We operate out of regional locations in the U.S., Canada, United Kingdom, Germany, Italy, South Africa, and Singapore.


Automation Commissioning Engineer II - Contract

<div><div>COMMISSIONING ENGINEER - WASTEWATER/WASTE SPECIALIST Company Description: Anaergia is a global leader in the production of clean energy, fertilizer, and recycled water from virtually any waste stream, offering the widest range of maximizing resource recovery solutions for the municipal, industrial, commercial and agricultural markets. Anaergia’s integrated solutions create value for its customers in the forms of renewable energy, quality fertilizers, and clean water, while dramatically reducing the cost of waste management. Anaergia delivers integrated solutions globally through established offices in North America, Europe, Africa, and Asia and its breakthrough technologies are in use at over a thousand resource recovery facilities worldwide, reducing greenhouse gas emissions while creating new revenue sources for its clients. Job DescriptionThis role reports to the Commissioning Manager.  Commissioning Engineer Goals<ul><li>Ensure planning, coordination and cooperation between sub-contractors and vendors on site.</li><li>Ensure the application of the highest safety standard in the start-up and commissioning phase as well as the full compliance to the safety rules.</li><li>Fulfill the agreed reporting with reliable data and within the requested deadline.</li><li>Ensure that all equipment supplied by Anaergia and plant functional tests have been carried out.</li><li>Establish and maintain the Commissioning Program.</li><li>Ensure relevant documentation is in place.</li><li>Ensure correct procedures are followed.</li><li>Ensure a safe system of work is established and maintained</li><li>Coordinate training and ensure that training programs are completed as specified.</li><li>Provide/assist in training activities on the relevant equipment</li><li>Produce Risk Assessments and Method Statements (RAMS) for specific commissioning activities as required.</li><li>Review the RAMS of sub-contractor commissioning or undertaking remedial work on the plant</li><li>Manage the activities of sub-contract commissioning teams.</li><li>Report non-conformance issues to the Commissioning Manager.</li><li>Update drawings and operational documentation to reflect changes made during the commissioning phase.</li><li>Ensure that Site Acceptance Tests (SAT’s) are completed, defects recorded, and arrangements made to rectify any plant faults.</li></ul> Commissioning Engineer Tasks<ul><li>Prior to the start of commissioning, obtain all up-to-date As-Built documentation (Drawings, test sheets, contingency plans). Retain a copy of this on site.</li><li>Carry out the commissioning process and tests in accordance with approved procedures and checklists, identify additional requirements for testing as required, prepare documentation and procedures to allow commissioning activities, and ensure commissioning activities are carried out in a safe manner. o Monitor and plan the delivery of supplies and services (expediting &amp; logistics) unless it is not covered by supply chain</li><li>Manage the activities of sub-contract commissioning teams.</li><li>Manage directly and/or via contractors the Quality Assurance / Quality Control;</li><li>Provide technical knowledge for all areas of the plant.</li><li>Arrange for operations staff to attend scheduled training sessions</li><li>Follow and adhere to the commissioning schedule;</li><li>Maintain works methodologies, contractor test plans, and equipment check sheets;</li><li>Complete I/O check sheets for digital input/outputs and analog input/outputs.</li><li>Coordinate all resources involved in site activities, both internal or external (outsourcers/sub-contractors), either through the updating and distributing of detailed schedules and/or setting regular site meetings;</li><li>Early identification of project risks for and early adoption of appropriate countermeasures;</li><li>Manage relationships with vendor and sub-contractor for what is concerning technical issues and organization of tasks, including technical correspondence, leaving to the PM the management of contractual-related communication;</li><li>Complete relevant commissioning test sheets.</li><li>Manage and update defects/punch lists.</li><li>Configuring and setup of PLC hardware and HMI Panels.</li><li>Troubleshooting PLC code, confirming signals to and from PLC inputs/outputs, and field instruments.</li><li>Configuring and setup of instrumentation devices in the field.</li><li>Configuring and setup of industrial communication devices and protocol/signal converters.</li><li>Troubleshooting industrial network devices and communication equipment in the field.</li></ul>  Job Requirements: Education: Holds a technical diploma or graduation in  / Mechanical engineering/ Electrical Engineering/ Mechatronics Engineering, Automation &amp; Instrumentation Technologist or Technician  equivalent  Experience: Minimum of 5 years experience as a Commissioning Engineer in the Industrial Plant business.  Competencies:The Commissioning Engineer has the following technical skillsets:<ul><li>Deeply understands and has the ability to manage contracts for supplying complex plants;</li><li>Specialty in control systems, industrial networks, and communication protocols, programming PLCs, development of SCADA systems, and experience with Siemens S7 via TIA Portal and Allen Bradley Controllogix and Compactlogix via Studio 5000.</li><li>Specialty in programming HMI Panels, experience with Siemens Intouch and Allen Bradley PanelView series HMI’s.</li><li>Solid Waste / Wastewater / Biogas / Power Generation specific competencies.</li><li>Some experience in purchasing is required;</li><li>Ability to manage detailed job schedules;</li><li>Knowledgeable in “site” project administration;</li><li>Skilled in understanding technical drawings, documents, and specifications;</li><li>Widely, rather than deeply, knowledgeable in all the disciplines involved with the construction and installation (civil, mechanical, electrical, instrumental, etc.);</li><li>Knowledgeable in construction codes and regulations;</li><li>Knowledgeable in quality control of all supplies;</li><li>Experienced in training resources on safety and technical matters</li><li>Experienced in managing relationships with Customers;</li><li>Experienced in leading and coordinating the assigned resources;</li></ul> Location:This would be a remote role with nearly 60-70% travel included at project sites, and the remaining work in a hybrid/remote setup. This could be located in either Carlsbad, Rhode Island, or Charlotte.The contract time frame is between 6 -9 months. </div></div>

<div><div>COMMISSIONING ENGINEER - WASTEWATER/WASTE SPECIALIST Company Description: Anaergia is a global leader in the production of clean energy, fertilizer, and recycled water from virtually any waste stream, offering the widest range of maximizing resource recovery solutions for the municipal, industrial, commercial, and agricultural markets. Anaergia’s integrated solutions create value for its customers in the forms of renewable energy, quality fertilizers and clean water, while dramatically reducing the cost of waste management. Anaergia delivers integrated solutions globally through established offices in North America, Europe, Africa, and Asia and its breakthrough technologies are in use at over a thousand resource recovery facilities worldwide, reducing greenhouse gas emissions while creating new revenue sources for its clients. Job DescriptionThis role reports to the Commissioning Manager.  Commissioning Engineer Goals<ul><li>Ensure planning, coordination and cooperation between sub-contractors and vendors on site.</li><li>Ensure the application of the highest safety standards in the start-up and commissioning phase as well as full compliance with the safety rules.</li><li>Fulfill the agreed reporting with reliable data and within the requested deadline.</li><li>Ensure that all equipment supplied by Anaergia and plant functional tests have been carried out.</li><li>Establish and maintain the Commissioning Program.</li><li>Ensure relevant documentation is in place.</li><li>Ensure correct procedures are followed.</li><li>Ensure a safe system of work is established and maintained</li><li>Coordinate training and ensure that training programs are completed as specified.</li><li>Provide/assist in training activities on the relevant equipment</li><li>Produce Risk Assessments and Method Statements (RAMS) for specific commissioning activities as required.</li><li>Review the RAMS of sub-contractor commissioning or undertaking remedial work on the plant</li><li>Manage the activities of sub-contract commissioning teams.</li><li>Report non-conformance issues to the Commissioning Manager.</li><li>Update drawings and operational documentation to reflect changes made during the commissioning phase.</li><li>Ensure that Site Acceptance Tests (SAT’s) are completed, defects recorded, and arrangements made to rectify any plant faults.</li></ul> Commissioning Engineer Tasks<ul><li>Prior to start of commissioning, obtain all up-to-date As-Built documentation (Drawings, test sheets, contingency plans). Retain a copy of this on-site.</li><li>Carry out the commissioning process and tests in accordance with approved procedures and checklists, identify additional requirements for testing as required, prepare documentation and procedures to allow commissioning activities, and ensure commissioning activities are carried out in a safe manner. Monitor and plan the delivery of supplies and services (expediting &amp; logistics) unless it is not covered by supply chain</li><li>Manage the activities of sub-contract commissioning teams.</li><li>Manage directly and/or via contractors the Quality Assurance / Quality Control;</li><li>Provide technical knowledge for all areas of the plant.</li><li>Arrange for operations staff to attend scheduled training sessions</li><li>Follow and adhere to the commissioning schedule;</li><li>Maintain works methodologies, contractor test plans, and equipment check sheets;</li><li>Complete I/O check sheets for digital input/outputs and analog input/outputs.</li><li>Coordinate all resources involved in site activities, both internal or external (outsourcers/sub-contractors), either through the updating and distributing of detailed schedules and/or setting regular site meetings;</li><li>Early identification of project risks for and early adoption of appropriate countermeasures;</li><li>Manage relationships with vendor and sub-contractor for what is concerning technical issues and organization of tasks, including technical correspondence, leaving to the PM the management of contractual-related communication;</li><li>Complete relevant commissioning test sheets.</li><li>Manage and update defects/punch lists.</li><li>Configuring and setup of PLC hardware and HMI Panels.</li><li>Troubleshooting PLC code, confirming signals to and from PLC inputs/outputs, and field instruments.</li><li>Configuring and setup of instrumentation devices in the field.</li><li>Configuring and setup of industrial communication devices and protocol/signal converters.</li><li>Troubleshooting industrial network devices and communication equipment in the field.</li></ul>  Job Requirements: Education: Holds a technical diploma or graduation in Mechanical Engineering / Electrical Engineering / Mechatronics Engineering, Automation &amp; Instrumentation Technologist or Technician equivalent.  Experience: Minimum of 5 years experience as a Commissioning Engineer in the Industrial Plant business.  Competencies:The Commissioning Engineer has the following technical skillsets:<ul><li>Deeply understands and has the ability to manage contracts for supplying complex plants;</li><li>Specialty in control systems, industrial networks and communication protocols, programming PLCs, development of SCADA systems, and experience with Siemens S7 via TIA Portal and Allen Bradley Controllogix and Compactlogix via Studio 5000.</li><li>Specialty in programming HMI Panels, experience with Siemens Intouch and Allen Bradley PanelView series HMI’s.</li><li>Solid Waste / Wastewater / Biogas / Power Generation specific competencies.</li><li>Some experience in purchasing is required;</li><li>Ability to manage detailed job schedules;</li><li>Knowledgeable in “site” project administration;</li><li>Skilled in understanding technical drawings, documents, and specifications;</li><li>Widely, rather than deeply, knowledgeable in all the disciplines involved with the construction and installation (civil, mechanical, electrical, instrumental, etc.);</li><li>Knowledgeable in construction codes and regulations;</li><li>Knowledgeable in quality control of all supplies;</li><li>Experienced in training resources on safety and technical matters</li><li>Experienced in managing relationships with Customers;</li><li>Experienced in leading and coordinating the assigned resources;</li></ul> Location:This would be a remote role with nearly 60-70% travel included at project sites, and the remaining work in a hybrid/remote setup.This could be located in either Carlsbad, Rhode Island, or Charlotte.</div></div>

Automation Commissioning Engineer II

<div><div>COMMISSIONING ENGINEER - WASTEWATER/WASTE SPECIALIST Company Description: Anaergia is a global leader in the production of clean energy, fertilizer and recycled water from virtually any waste stream, offering the widest range of maximizing resource recovery solutions for the municipal, industrial, commercial, and agricultural markets. Anaergia’s integrated solutions create value for its customers in the forms of renewable energy, quality fertilizers, and clean water, while dramatically reducing the cost of waste management. Anaergia delivers integrated solutions globally through established offices in North America, Europe, Africa, and Asia and its breakthrough technologies are in use at over a thousand resource recovery facilities worldwide, reducing greenhouse gas emissions while creating new revenue sources for its clients. Job DescriptionThis role reports to the Commissioning Manager.  Commissioning Engineer Goals<ul><li>Ensure planning, coordination and cooperation between sub-contractors and vendors on site.</li><li>Ensure the application of the highest safety standards in the start-up and commissioning phase as well as full compliance with the safety rules.</li><li>Fulfill the agreed reporting with reliable data and within the requested deadline.</li><li>Ensure that all equipment supplied by Anaergia and plant functional tests have been carried out.</li><li>Establish and maintain the Commissioning Program.</li><li>Ensure relevant documentation is in place.</li><li>Ensure correct procedures are followed.</li><li>Ensure a safe system of work is established and maintained</li><li>Coordinate training and ensure that training programs are completed as specified.</li><li>Provide/assist in training activities on the relevant equipment</li><li>Produce Risk Assessments and Method Statements (RAMS) for specific commissioning activities as required.</li><li>Review the RAMS of sub-contractor commissioning or undertaking remedial work on the plant</li><li>Manage the activities of sub-contract commissioning teams.</li><li>Report non-conformance issues to the Commissioning Manager.</li><li>Update drawings and operational documentation to reflect changes made during the commissioning phase.</li><li>Ensure that Site Acceptance Tests (SAT’s) are completed, defects recorded, and arrangements made to rectify any plant faults.</li></ul> Commissioning Engineer Tasks<ul><li>Prior to the start of commissioning, obtain all up to date As-Built documentation (Drawings, test sheets, contingency plans). Retain a copy of this on-site.</li><li>Carry out the commissioning process and tests in accordance with approved procedures and checklists, identify additional requirements for testing as required, prepare documentation and procedures to allow commissioning activities, and ensure commissioning activities are carried out in a safe manner. Monitor and plan the delivery of supplies and services (expediting &amp; logistics) unless it is not covered by supply chain</li><li>Manage the activities of sub-contract commissioning teams.</li><li>Manage directly and/or via contractors the Quality Assurance / Quality Control;</li><li>Provide technical knowledge for all areas of the plant.</li><li>Arrange for operations staff to attend scheduled training sessions</li><li>Follow and adhere to the commissioning schedule;</li><li>Maintain works methodologies, contractor test plans, and equipment check sheets;</li><li>Complete I/O check sheets for digital input/outputs and analog input/outputs.</li><li>Coordinate all resources involved in site activities, both internal or external (outsourcers/sub-contractors), either through the updating and distributing of detailed schedules and/or setting regular site meetings;</li><li>Early identification of project risks for and early adoption of appropriate countermeasures;</li><li>Manage relationships with vendor and sub-contractor for what is concerning technical issues and organization of tasks, including technical correspondence, leaving to the PM the management of contractual-related communication;</li><li>Complete relevant commissioning test sheets.</li><li>Manage and update defects/punch lists.</li><li>Configuring and setup of PLC hardware and HMI Panels.</li><li>Troubleshooting PLC code, confirming signals to and from PLC inputs/outputs, and field instruments.</li><li>Configuring and setup of instrumentation devices in the field.</li><li>Configuring and setup of industrial communication devices and protocol/signal converters.</li><li>Troubleshooting industrial network devices and communication equipment in the field.</li></ul>  Job Requirements: Education:  Holds a technical diploma or graduation in Mechanical Engineering / Electrical Engineering / Mechatronics Engineering, Automation &amp; Instrumentation Technologist or Technician equivalent.  Experience: Minimum of 5 years experience as a Commissioning Engineer in the Industrial Plant business.  Competencies:The Commissioning Engineer has the following technical skillsets:<ul><li>Deeply understands and has the ability to manage contracts for supplying complex plants;</li><li>Specialty in control systems, industrial networks and communication protocols, programming PLCs, development of SCADA systems, and experience with Siemens S7 via TIA Portal and Allen Bradley Controllogix and Compactlogix via Studio 5000.</li><li>Specialty in programming HMI Panels, experience with Siemens Intouch and Allen Bradley PanelView series HMI’s.</li><li>Solid Waste / Wastewater / Biogas / Power Generation specific competencies.</li><li>Some experience in purchasing is required;</li><li>Ability to manage detailed job schedules;</li><li>Knowledgeable in “site” project administration;</li><li>Skilled in understanding technical drawings, documents, and specifications;</li><li>Widely, rather than deeply, knowledgeable in all the disciplines involved with the construction and installation (civil, mechanical, electrical, instrumental, etc.);</li><li>Knowledgeable in construction codes and regulations;</li><li>Knowledgeable in quality control of all supplies;</li><li>Experienced in training resources on safety and technical matters</li><li>Experienced in managing relationships with Customers;</li><li>Experienced in leading and coordinating the assigned resources;</li></ul> Location:This would be a remote role with nearly 60-70% travel included at project sites, and the remaining work in a hybrid/remote setup.This could be located in either Carlsbad, Rhode Island or Charlotte.</div></div>

<div><div>COMMISSIONING ENGINEER - WASTEWATER/WASTE SPECIALIST Company Description: Anaergia is a global leader in the production of clean energy, fertilizer, and recycled water from virtually any waste stream, offering the widest range of maximizing resource recovery solutions for the municipal, industrial, commercial and agricultural markets. Anaergia’s integrated solutions create value for its customers in the forms of renewable energy, quality fertilizers and clean water, while dramatically reducing the cost of waste management. Anaergia delivers integrated solutions globally through established offices in North America, Europe, Africa, and Asia and its breakthrough technologies are in use at over a thousand resource recovery facilities worldwide, reducing greenhouse gas emissions while creating new revenue sources for its clients. Job DescriptionThis role reports to the Commissioning Manager.  Commissioning Engineer Goals<ul><li> Ensure planning, coordination and cooperation between sub-contractors and vendors on site.</li><li> Ensure the application of the highest safety standard in the start-up and commissioning phase as well as the full compliance to the safety rules.</li><li> Fulfill the agreed reporting with reliable data and within the requested deadline.</li><li> Ensure that all equipment supplied by Anaergia and plant functional tests have been carried out.</li><li> Establish and maintain the Commissioning Program.</li><li> Ensure relevant documentation is in place.</li><li> Ensure correct procedures are followed.</li><li> Ensure a safe system of work is established and maintained</li><li> Coordinate training and ensure that training programs are completed as specified.</li><li> Provide/assist in training activities on the relevant equipment</li><li> Produce Risk Assessments and Method Statements (RAMS) for specific commissioning activities as required.</li><li> Review the RAMS of sub-contractor commissioning or undertaking remedial work on the plant</li><li> Manage the activities of sub-contract commissioning teams.</li><li> Report non-conformance issues to the Commissioning Manager.</li><li> Update drawings and operational documentation to reflect changes made during the commissioning phase.</li><li> Ensure that Site Acceptance Tests (SAT’s) are completed, defects recorded, and arrangements made to rectify any plant faults.</li></ul> Commissioning Engineer Tasks<ul><li> Prior to start of commissioning, obtain all up-to-date As-Built documentation (Drawings, test sheets, contingency plans). Retain a copy of this on site.</li><li> Carry out the commissioning process and tests in accordance with approved procedures and checklists, identify additional requirements for testing as required, prepare documentation and procedures to allow commissioning activities, and ensure commissioning activities are carried out in a safe manner. o Monitor and plan the delivery of supplies and services (expediting &amp; logistics) unless it is not covered by supply chain</li><li> Manage the activities of sub-contract commissioning teams.</li><li> Manage directly and/or via contractors the Quality Assurance / Quality Control;</li><li> Provide technical knowledge for all areas of the plant.</li><li> Arrange for operations staff to attend scheduled training sessions</li><li> Follow and adhere to the commissioning schedule;</li><li> Maintain works methodologies, contractor test plans, and equipment check sheets; </li><li> Complete I/O check sheets for digital input/outputs and analog input/outputs.</li><li> Coordinate all resources involved in site activities, both internal or external (outsourcers/sub-contractors), either through the updating and distributing of detailed schedules and/or setting regular site meetings;</li><li> Early identification of project risks for and early adoption of appropriate countermeasures;</li><li> Manage relationships with vendor and sub-contractor for what is concerning technical issues and organization of tasks, including technical correspondence, leaving to the PM the management of contractual-related communication;</li><li> Complete relevant commissioning test sheets.</li><li> Manage and update defects/punch lists. </li><li> Configuring and setup of PLC hardware and HMI Panels.</li><li> Troubleshooting PLC code, confirming signals to and from PLC inputs/outputs, and field instruments.</li><li> Configuring and setup of instrumentation devices in the field.</li><li> Configuring and setup of industrial communication devices and protocol/signal converters. </li><li> Troubleshooting industrial network devices and communication equipment in the field.</li></ul>  Job Requirements: Education: Holds a technical diploma or graduation in  / Mechanical engineering/ Electrical Engineering/ Mechatronics Engineering, Automation &amp; Instrumentation Technologist or Technician  equivalent  Experience: Minimum of 5 years experience as a Commissioning Engineer in the Industrial Plant business.  Competencies:The Commissioning Engineer has the following technical skillsets:<ul><li> Deeply understands and has the ability to manage contracts for supplying complex plants;</li><li> Specialty in control systems, industrial networks, and communication protocols, programming PLCs, development of SCADA systems, and experience with Siemens S7 via TIA Portal and Allen Bradley Controllogix and Compactlogix via Studio 5000. </li><li> Specialty in programming HMI Panels, experience with Siemens Intouch and Allen Bradley PanelView series HMI’s.</li><li> Solid Waste / Wastewater / Biogas / Power Generation specific competencies.</li><li> Some experience in purchasing is required;</li><li> Ability to manage detailed job schedules;</li><li> Knowledgeable in “site” project administration;</li><li> Skilled in understanding technical drawings, documents, and specifications;</li><li> Widely, rather than deeply, knowledgeable in all the disciplines involved with the construction and installation (civil, mechanical, electrical, instrumental, etc.);</li><li> Knowledgeable in construction codes and regulations;</li><li> Knowledgeable in quality control of all supplies;</li><li> Experienced in training resources on safety and technical matters</li><li> Experienced in managing relationships with Customers;</li><li> Experienced in leading and coordinating the assigned resources;</li></ul> Location:This would be a remote role with nearly 60-70% travel included at project sites, and remaining work in a hybrid/remote setup. This could be located in either Carlsbad, Rhode Island or Charlotte.The contract time frame is between 6 -9 months. </div></div>

<div><div>COMMISSIONING ENGINEER - WASTEWATER/WASTE SPECIALIST Company Description: Anaergia is a global leader in the production of clean energy, fertilizer and recycled water from virtually any waste stream, offering the widest range of maximizing resource recovery solutions for the municipal, industrial, commercial, and agricultural markets. Anaergia’s integrated solutions create value for its customers in the forms of renewable energy, quality fertilizers and clean water, while dramatically reducing the cost of waste management. Anaergia delivers integrated solutions globally through established offices in North America, Europe, Africa, and Asia and its breakthrough technologies are in use at over a thousand resource recovery facilities worldwide, reducing greenhouse gas emissions while creating new revenue sources for its clients. Job DescriptionThis role reports to the Commissioning Manager.  Commissioning Engineer Goals<ul><li> Ensure planning, coordination and cooperation between sub-contractors and vendors on site.</li><li> Ensure the application on the highest safety standards in the start-up and commissioning phase as well as full compliance with the safety rules.</li><li> Fulfill the agreed reporting with reliable data and within the requested deadline.</li><li> Ensure that all equipment supplied by Anaergia and plant functional tests have been carried out.</li><li> Establish and maintain the Commissioning Program.</li><li> Ensure relevant documentation is in place.</li><li> Ensure correct procedures are followed.</li><li> Ensure a safe system of work is established and maintained</li><li> Coordinate training and ensure that training programs are completed as specified.</li><li> Provide/assist in training activities on the relevant equipment</li><li> Produce Risk Assessments and Method Statements (RAMS) for specific commissioning activities as required.</li><li> Review the RAMS of sub-contractor commissioning or undertaking remedial work on the plant</li><li> Manage the activities of sub-contract commissioning teams.</li><li> Report non-conformance issues to the Commissioning Manager.</li><li> Update drawings and operational documentation to reflect changes made during the commissioning phase.</li><li> Ensure that Site Acceptance Tests (SAT’s) are completed, defects recorded, and arrangements made to rectify any plant faults.</li></ul> Commissioning Engineer Tasks<ul><li> Prior to start of commissioning, obtain all up to date As-Built documentation (Drawings, test sheets, contingency plans). Retain a copy of this on-site.</li><li> Carry out the commissioning process and tests in accordance with approved procedures and checklists, identify additional requirements for testing as required, prepare documentation and procedures to allow commissioning activities, and ensure commissioning activities are carried out in a safe manner. Monitor and plan the delivery of supplies and services (expediting &amp; logistics) unless it is not covered by supply chain</li><li> Manage the activities of sub-contract commissioning teams.</li><li> Manage directly and/or via contractors the Quality Assurance / Quality Control;</li><li> Provide technical knowledge for all areas of the plant.</li><li> Arrange for operations staff to attend scheduled training sessions</li><li> Follow and adhere to the commissioning schedule;</li><li> Maintain works methodologies, contractor test plans, and equipment check sheets;</li><li> Complete I/O check sheets for digital input/outputs and analog input/outputs.</li><li> Coordinate all resources involved in site activities, both internal or external (outsourcers/sub-contractors), either through the updating and distributing of detailed schedules and/or setting regular site meetings;</li><li> Early identification of project risks for and early adoption of appropriate countermeasures;</li><li> Manage relationships with vendor and sub-contractor for what is concerning technical issues and organization of tasks, including technical correspondence, leaving to the PM the management of contractual-related communication;</li><li> Complete relevant commissioning test sheets.</li><li> Manage and update defects/punch lists.</li><li> Configuring and setup of PLC hardware and HMI Panels.</li><li> Troubleshooting PLC code, confirming signals to and from PLC inputs/outputs, and field instruments.</li><li> Configuring and setup of instrumentation devices in the field.</li><li> Configuring and setup of industrial communication devices and protocol/signal converters. </li><li> Troubleshooting industrial network devices and communication equipment in the field.</li></ul>  Job Requirements: Education: Holds a technical diploma or graduation in Mechanical engineering/ Electrical Engineering/ Mechatronics Engineering, Automation &amp; Instrumentation Technologist or Technician equivalent.  Experience: Minimum of 5 years experience as a Commissioning Engineer in the Industrial Plant business.  Competencies:The Commissioning Engineer has the following technical skillsets:<ul><li> Deeply understands and has the ability to manage contracts for supplying complex plants;</li><li> Specialty in control systems, industrial networks and communication protocols, programming PLCs, development of SCADA systems, and experience with Siemens S7 via TIA Portal and Allen Bradley Controllogix and Compactlogix via Studio 5000. </li><li> Specialty in programming HMI Panels, experience with Siemens Intouch and Allen Bradley PanelView series HMI’s.</li><li> Solid Waste / Wastewater / Biogas / Power Generation specific competencies.</li><li> Some experience in purchasing is required;</li><li> Ability to manage detailed job schedules;</li><li> Knowledgeable in “site” project administration;</li><li> Skilled in understanding technical drawings, documents, and specifications;</li><li> Widely, rather than deeply, knowledgeable in all the disciplines involved with the construction and installation (civil, mechanical, electrical, instrumental, etc.);</li><li> Knowledgeable in construction codes and regulations;</li><li> Knowledgeable in quality control of all supplies;</li><li> Experienced in training resources on safety and technical matters</li><li> Experienced in managing relationships with Customers;</li><li> Experienced in leading and coordinating the assigned resources;</li></ul> Location:This would be a remote role with nearly 60-70% travel included at project sites, and the remaining work in a hybrid/remote setup.This could be located in either Carlsbad, Rhode Island or Charlotte.</div></div>

<div><div><div><div><div><div><div><div><h2>Our Mission</h2>SPAN develops products that accelerate the rapid adoption of renewable energy in the home. The flagship SPAN Smart Panel is the first true evolution for the traditional home electric panel, harnessing enhanced technology for metering, monitoring, and control. An expanded product suite of intelligent, integrated solutions radically lowers the cost and complexity of energy upgrades–including solar, batteries and EVs–empowering homeowners to be active, resilient and informed players in the energy market. </div></div></div></div></div></div></div></div><h3>The Role </h3>We are seeking a seasoned platform infrastructure engineer with expertise building and operating cloud infrastructure, to join our team building the tools and systems to provide an internal developer platform. You’ll join our cloud platform engineering team, bringing your expertise in infrastructure to bear as we design, implement, and manage the SPAN cloud system. You’ll work with other engineers including mobile, device firmware, and systems software in our broader software engineering group. Your infrastructure experience will help us build features and systems that helps our engineering teams deliver software and hardware products with high velocity, security and quality via automated testing and best-practices in our continuous deployment system and internal developer platform.Responsibilities<ul><li>Design and develop CI/CD tools, pipelines and re-usable infrastructure-as-code.</li><li>Work on the delivery of new and improved developer facing features for internal engineering teams.</li><li>Collaborate with teams across the organization to gather requirements and participate in our agile development process to build systems.</li><li>Participate in an on-call rotation focused on supporting and maintaining the systems we provide to the rest of the organization.</li></ul><h3>About You </h3>Required QualificationsWe are seeking a seasoned infrastructure engineer with 5+ years demonstrating knowledge and experience in:<ul><li>Designing and building cloud infrastructure including CI/CD systems, with substantive experience with Kubernetes &amp; Terraform or equivalent infrastructure-as-code tools.</li><li>Extensively leveraging cloud provider managed systems, preferably AWS.</li><li>Development and use of observability systems to improve overall system health and meantime to resolution of incidents (Datadog, Grafana, PagerDuty, etc.).</li><li>Collaborating with engineers from multiple domains, to design secure, robust, scalable, and resilient systems.</li><li>Collaborating with coworkers in a shared code base using industry standard tools and processes including source control, linting, and unit/smoke/end-to-end testing.</li><li>A common scripting language (e.g. Python, shell scripting).</li></ul>Bonus QualificationsWe would love to hire someone with experience working in one or more of the following areas:<ul><li>Internet of Things (IoT) products (e.g. AWS IoT, Google Cloud IoT, something homegrown) or other hardware component to the product.</li><li>Experience building an internal developer platform.</li><li>Writing and maintaining CLI and Web UI services for internal developer use.</li><li>Container based deployments.</li><li>Automating and integration with hardware testing and lab systems.</li><li>Experience writing and debugging Go, especially related to Kubernetes.</li><li>Experience with rolling out SSO across an organization.</li></ul> <div><div><div><div><div><div><div>The U.S. base salary range for this position is $159,700 - $200,000 plus benefits, equity and variable compensation for Sales-related roles. This range represents SPAN’s good faith estimate of competitively-priced salary for the role based on national, real-time industry data from companies of a similar growth stage. This range reflects minimum and maximum new hire salaries for the role in San Francisco county. Within the range, individual pay is determined by location and individual factors including relevant skills, experience and education or training. This range correlates to the relative level of the candidate we believe we need for the role and may require an adjustment for candidates of a different level. Your recruiter can share more about the specific salary range for the location this role is based during the hiring process. </div><div><div><h2>Life at SPAN</h2><h3>SPAN embraces diversity and equal opportunity in a serious way. We are committed to building a team that represents a variety of backgrounds, perspectives, and skills. </h3>Headquartered in San Francisco’s vibrant SoMa neighborhood, we are an eclectic group of creative thinkers who value open communication, teamwork, and a ‘make it happen’ approach to addressing complex challenges. Our CEO, Arch Rao⁠—former head of the Tesla Powerwall team⁠—fosters an energetic and collaborative environment, with a strong emphasis on maintaining work-life-balance across the organization.We’re hiring talented individuals who are driven by success and are passionate about shaping the future of renewable energy. If that sounds like you, we’d love for you to consider joining the rapidly growing team at SPAN.The Perks:⚡ Competitive compensation + equity grants at a well-funded, venture-backed company⚡ Comprehensive benefits (including medical; dental, vision, life and disability insurance)⚡ Comfortable, sunny office space located near BART and Caltrain public transit⚡ Strong focus on teambuilding and company culture (events, meet-ups, clubs)⚡ Flexible hours and unlimited PTOOur Mission &amp; Values:At SPAN, we believe that powering your home with clean energy should be a simple and delightful experience that is at its essence human-centered and technology-forward.Our core values include:<ul><li>Making home energy more accessible, intuitive, and convenient.</li><li>Enabling homes and vehicles to be powered by the sun.</li><li>Building resilient homes with reliable power.</li><li>All-electric everything.</li><li>A more flexible &amp; distributed grid.</li></ul>Interested in joining our team? Submit an application today and we’ll be in touch with next steps!</div></div></div></div></div></div></div></div>

Developing intuitive renewable energy products for a simple and delightful home experience, SPAN embraces technology and humanity.

Explore jobs

Get Hired

Discover climate organizations

Join our Fellowship

Post a job

Speak at our Fellowship

Become a Climatebase member

PLATFORMS

MEMBERS

WHO WE ARE